Aaeon BOXER-6357VS User manual

Railway
Embedded Box PC BOXER-6357VS
BOXER-6357VS
Railway Embedded Box PC
Onboard Intel®Core™ i7 Processor
EN50155Tx-Certified, Isolated Digital I/O
Hot-Swappable/Pluggable/RAID-enabled HDD
BOXER-6357VS Manual 1st Ed
June 11, 2015

Railway
Embedded Box PC BOXER-6357VS
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i

Railway
Embedded Box PC BOXER-6357VS
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
CFast™is a trademark of the Compact Flash Association.
Intel®and Core™ are trademarks of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft
Corp.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
Please be notified that all other products’ name or trademarks
not be mentioned above are properties of their respective
owners.
ii

Railway
Embedded Box PC BOXER-6357VS
Packing List
Before you begin installing your system, please make sure
that the following materials have been shipped:
1 BOXER-6357VS Embedded Box PC
1 M2 x 3 mm screws (S1A5003030)
1 M4 x 6 mm screws (S1F5106010)
4 M8 x 8 mm screws (S1F6108010)
2 Drive bay keys
1 3-pin Phoenix connector (1652003201)
2 Wallmount bracket
1 Product DVD
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
iii

Railway
Embedded Box PC BOXER-6357VS
Safety & Warranty
Please read the following safety instructions carefully. It is advised
that you keep this manual for future references
1. Disconnect this device from any AC supply before cleaning.
2. While cleaning, use a damp cloth instead of liquid or spray
detergents.
3. For any pluggable equipment, the power outlet must be
installed near the device and easily accessible.
4. Keep this device away from humidity.
5. Place this device on a solid surface during installation.
Dropping it or letting it fall could cause damage.
6. The openings on the device’s enclosure are for dissipating
heat. DO NOT COVER THE OPENINGS.
7. Watch out for high temperatures that may occur during system
operation.
8. Make sure the voltage of the power source is correct before
connecting the device to the power outlet.
9. Position the power cord so that people cannot step on it. Do
not place anything over the power cord.
10. All cautions and warnings on the device should be noted.
11. If the device is not to be used for a long time, disconnect it
from the power supply to avoid damage by transient
over-voltage.
12. Never pour any liquid into the openings. This could cause fires
iv

Railway
Embedded Box PC BOXER-6357VS
or electric shocks.
13. As most electronic components are sensitive to static electrical
charge, be sure to ground yourself to prevent static charge
when installing the internal components. Use a grounding wrist
strap and contain all electronic components in any
static-shielded devices.
14. If any of the following situations arises, please the contact our
service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as
described in this manual
v.The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
15. Do not leave this device in an uncontrolled environment where
the storage temperature is below -10°C or above 60°C to
prevent damage.
v

Railway
Embedded Box PC BOXER-6357VS
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions and your local government’s recycling
or disposal directives.
vi

Railway
Embedded Box PC BOXER-6357VS
China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Boxer/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
外壳
×
○
○
○
○
○
中央处理器
与内存
×
○
○
○
○
○
硬盘
×
○
○
○
○
○
电源
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006
标准规定的限量要求以下。
X
：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006
标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品。
vii

Railway
Embedded Box PC BOXER-6357VS
China RoHS Requirements
Poisonous or Hazardous Substances or Elements in Products
AAEON Boxer/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components X O O O O O○
Wires &
Connectors
for External
Connections
X O O O O O
Chassis
CPU & RAM
Hard Disk
PSU
O: The quantity of poisonous or hazardous substances or elements found in each of
the component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least
one of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is
applicable under normal usage only
viii

Railway
Embedded Box PC BOXER-6357VS
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features .................................................................... 1-3
1.3 Specifications............................................................ 1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions.................................................... 2-2
2.2 Dimensions and I/Os.................................................2-3
2.3 Setting Jumpers ........................................................ 2-5
2.4 List of Jumpers.......................................................... 2-6
2.4.1 Clear CMOS Selection (JP1)........................... 2-7
2.4.2 COM2/3 12V/5V/RI (JP4/5).............................2-7
2.5 List of Connectors .....................................................2-8
2.5.1 M12 Ethernet 1/2 (CN1/2) .............................2-10
2.5.2 Front Panel Connector (CN6)........................ 2-10
2.5.3 BIOD SPI Flash Header (CN7)......................2-11
2.5.4 LCP Connector (CN18) .................................2-11
2.5.5 USB 3.0 Connector (CN22)........................... 2-11
2.5.6 USB 2.0 Connector (CN23)........................... 2-12
2.5.7 Digital Input/ Output (CN35)..........................2-12
2.5.8 COM1/2 RS-232/422/485 Connector (CN38/39)
................................................................................2-16
2.5.9 Isolated COM1 RS-232/422/485 Connector
(CN40) ....................................................................2-16
ix

Railway
Embedded Box PC BOXER-6357VS
2.5.10 M12 USB 2.0 x 2 (USBM1)..........................2-17
2.5.11 PoE Control Bus Connector (POECN1)......2-17
2.5.12 PSON Connector (PSONCN1)....................2-17
2.5.13 PoE On/Off Connector (POECN2)..............2-18
2.5.14 Power Switch (PWESW1) ...........................2-18
2.5.15 Power Standby Connector (LEDSB5VCN12)
................................................................................2-18
2.5.16 Power LED Connector (LEDCN19)............. 2-18
2.5.17 Hard Disk LED (HDDLEDCN1) ...................2-18
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 AMI BIOS Setup........................................................ 3-3
Chapter 4 Driver Installation
4.1 Installation……………………………………………..4-3
Appendix A Programming The Watchdog Timer
A.1 Watchdog Timer Initial Program ............................A-2
Appendix B I/O Information
B.1 I/O Address Map ..................................................B-2
B.2 Memory Address Map ..........................................B-5
B.3 IRQ Mapping Chart ..............................................B-6
B.4 DMA Channel Assignment .................................B-19
Appendix C RAID & AHCI Settings
C.1 Setting RAID ....................................................... C-2
x

Railway
Embedded Box PC BOXER-6357VS
C.2 Setting AHCI ..................................................... C-12
Appendix D RAID & AHCI Settings
D.1 DI/O Programming .............................................. D-2
D.2 Digital I/O Register .............................................. D-3
D.3 Digital I/O Sample Program ................................ D-4
xi

Railway
Embedded Box PC BOXER-6357VS
General
Information
Chapter
1
Chapter 1 General Information 1- 1

Railway
Embedded Box PC BOXER-6357VS
1.1 Introduction
This User’s Manual contains all the essential information, such as
detailed descriptions and explanations on the product’s hardware
and software features, its specifications, dimensions,
jumper/connector settings/definitions, and driver installation
instructions, to facilitate users in setting up their product.
Usersmay refer to the AAEON.com for the latest version of
this document.
Chapter 1 General Information 1- 2

Railway
Embedded Box PC BOXER-6357VS
1.2 Features
Onboard Intel®Core™ i7-3517UE Processor
EN50155Tx-Certified
Isolated RS-232/422/485
Isolated Digital I/O
PoE Port x 4, supports 802.11af
M12 Connector for LAN/ COMs/ USBs/ Power
Full-size Mini PCIe Slot x 3 for 4G(3G)/ WiFi/ GPS
SIM Slot x 3
2.5” HDD/SSD Bay x 2 – Supports Hot-Plugging, Hot
Swapping, RAID 0, 1
Supports 16.5 ~ 160V (1500Vdc isolation)
Remote Power On/Off
Chapter 1 General Information 1- 3

Railway
Embedded Box PC BOXER-6357VS
1.3 Specifications
CPU Intel®Core™ i7-3517U, up to 2.8 GHz
Chipset Intel®QM77
System Memory DDR3 1333/1600 SODIMM x 2, up to. 16
GB
Display Interface VGA DB-15 x 1
DVI DVI-I x 1 (DVI-A x DVI-D)
Storage
Device
HDD/SSD 2.5” Hot-Swappable/ Pluggable, RAID 0, 1
supported Drive Bay x 2 (Optionally
expandable to 4 RAID 0, 1, 5, 10 supported
HDDs)
CFast CFast™ Slot x 1
Network LAN Gigabit Ethernet
Wireless Optional by MiniCard Wireless Module
Front I/O USB Port USB 2.0 x 2 (M12, Female)
LAN Gigabit LAN x 2 (M12, Female)
Serial Port RS232/422/485 x 1 (M12, Female)
Display VGA x 1, DVI-I x 1
PoE 802.3af PoE x 4
Others Power On/Off LED Switch x 1
CFast™ Slot x 1 (Covered)
SIM Slot x 1 (Covered)
Removable HDD kit (SATA6 Gb/s) x 2
2-pin Remote Power On/Off Switch (via
Chapter 1 General Information 1- 4

Railway
Embedded Box PC BOXER-6357VS
Cable)
Rear I/O USB Port USB 3.0 x 2 (TypeA)
LAN -
Serial Port RS-232/422/485 x 2 (DB-9, non-isolated)
RS-232/422/485 x 1 (DB-9, isolated)
Display -
PoE -
Others Isolated DI/O x 8 (Input x 6, Output x 2)
Line-out x 1
Mic-in x 1
Power Input Connector (refer to Power
Supply for details)
Antenna Opening x 3 (for WiFi, GPS,
3G/4G respectively)
Expansion MiniCard Full-size MiniCard x 3
Others SIM Socket x 3
Indicator System LED x 1 on Power On/Off
Power Supply EN50155-certified
Supports ATX/AT, default ATX
DC-in with M12 Connector
Supports 16.5 ~ 75 V or 43 ~ 160 V
Supports Over-voltage Protection
Supports Low-voltage Protection
Supports Short Circuit Protection
System Cooling Passive
Chapter 1 General Information 1- 5

Railway
Embedded Box PC BOXER-6357VS
Mounting Wall Mount
Operating Temperature -40°C ~ 70°C (-40°F ~ 158°F), 85°C
(185°F) for 10 minutes only
Storage Temperature -40°C ~ 80°C (-40°F ~ 176°F)
Anti-Vibration EN61373 Standard
Anti-Shock EN61373 Standard
Dimension (W x H x D) 286 x 135 x 174.2 mm (112.60” x 68.58” x
53.15”)
Gross Weight 6.9 kg
Net Weight 8.26 kg
OS Support Windows 8.1 (32/64-bit)
Windows 7 (32/64-bit)
Windows XP Pro (32-bit)
Windows Embedded Standard 8
Windows Embedded Standard 7
Windows Embedded Standard
Chapter 1 General Information 1- 6

Railway
Embedded Box PC
B O X E R - 6 3 5 7 V S
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Guide
Chapter
2

Railway
Embedded Box PC
B O X E R - 6 3 5 7 V S
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis