A&L Furniture Crossleg Bench User manual

Assembly Instructions
Crossleg Bench
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[e-mail] or call us at 866-896-5747

PARTS (included)
Bench Top (1)
Bench Legs (2)
HARDWARE (included)
2” Bolts (4)
2” Lag Screws (4)
Allen Wrench (1)
TOOLS NEEDED
Hammer
7/16” Wrench or Socket
b
c
a
Photo 1 Photo 2
Photo 3 Photo 4
b
STEP 1
Lay the bench top upside down on a flat clean surface. Unfold each bench leg so that it forms an X and
place them on the bench with the notches in the legs on each side of the 2x2. (See photo 1.) Now insert a
2” bolt through the holes in the legs and turn them into the metal inserts in the 2x2. (See photo 2.) Tighten
with the Allen wrench.
STEP 2
Position 2x2 braces (attached to the center of the legs). Keep one to each side of the crack between the
bench top boards. (See photo 3.) Insert the 2” lag screws through the predrilled holes in the braces. Tap
them with the hammer to get them started into the bench top. They are self drilling and will not crack the
wood. Tighten with the 7/16” wrench or socket. Do not overtighten as this may cause them to break!
a
a