A&L Furniture Ridgemont User manual

Assembly Instructions
Ridgemont Table Set
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[email protected] or call us at 866-896-5747

PARTS (included)
¼” x ½” Bolt (28)
Allen Wrench (1)
b
a
STEP 1
Lay the table top upside down on a clean flat surface and place the legs on the metal plate on the table top.
(See photo 1.) Fasten the legs to the plates with the ¼” x ½” bolts. (See photo 2.) Use the Allen wrench to
tighten them.
Photo 1 Photo 2
STEP 2
Adjust the levelers in each leg (see photo 3) to stabilize the table so it doesn’t rock or wobble. (You should
be able to turn these with your fingers but if they are a little tight you may have to use pliers.)
Photo 3
B
HARDWARE (included)
A
a
TOOLS NEEDED
None
Table Top (1)
Table Legs (2)
Bench Legs (4)
Bench Tops (2)
C
D
STEP 3
For the benches repeat steps 1 & 2 and attach the legs to the benches using the same procedure as for
the table except only 4 bolts are needed for each leg instead of 6. The levelers can be adjusted the same
way.