Aastra 6755i User manual

Phone user guide
copyright © 2009 PCCW
Page 1 of 24
one communications
Phone set user guide
Aastra 6755i & 6730i
Last update: Aug 2010
This presentation contains confidential & proprietary information from PCCW and
should not be copied or distributed without PCCW‟s prior written permission.

Phone user guide
copyright © 2009 PCCW
Page 2 of 24
TABLE OF CONTENTS
1. Making calls.......................................................................................................................................................3
1.1. Dialing a number.......................................................................................................... 3
1.2. Using Busy Lamp......................................................................................................... 3
1.3. Redial............................................................................................................................. 3
2. Receiving calls..................................................................................................................................................4
2.1. Answer an incoming call ............................................................................................. 4
2.2. Answer a new incoming call during a phone conversation.................................... 4
2.3. Sending an incoming call to voicemail...................................................................... 4
3. Volume adjustment..........................................................................................................................................5
4. Handling calls ...................................................................................................................................................5
4.1. Holding call.................................................................................................................... 5
4.2. Call forwarding.............................................................................................................. 5
4.3. Do-Not-Disturb (DND) ................................................................................................. 8
4.4. Transferring calls.......................................................................................................... 8
4.5. Conferencing calls (3-party conference calling is supported)............................... 8
4.6. Call Park & Call Retrieve ............................................................................................ 9
4.7. Paging.......................................................................................................................... 10
4.8. Call pickup................................................................................................................... 10
4.9. Boss and Sec incoming call handling ..................................................................... 11
5. Managing calls................................................................................................................................................11
5.1. Voicemail..................................................................................................................... 11
5.2. Voicemail remote access.......................................................................................... 12
5.3. Phone book................................................................................................................. 12
5.4. Call logs....................................................................................................................... 12
6. Fixed / Mobile Convergence...........................................................................................................13
6.1. Pick up simultaneous ring call.................................................................................. 13
6.2. Call pull........................................................................................................................ 13
6.3. Mobile extension (This feature can only be used in designated handsets
models) .................................................................................................................................. 14
7. Feature access codes...................................................................................................................................23

Phone user guide
copyright © 2009 PCCW
Page 3 of 24
1. Making calls
1.1. Dialing a number
a) First, lift the handset to take the phone off-hook (if using hands-free
speakerphone, simply press or a line button, i.e. “L1”)
b) At the dial tone, enter the extension / external call number you wish to call (note:
You are NOT required to dial “9” when making an external call)
c) Press the Dial button.
d) When you finish speaking, hang up the phone by placing the handset back on-
hook (if using hand-free speakerphone, press to hang up)
1.2. Using Busy Lamp
a) First, take the phone off-hook. Then, press the Busy Lamp key for that extension.
b) When you finish speaking, hang up the phone by placing the handset back on-
hook.
Note 1: Operator Plan phone set includes the “Expansion Module”, which allows
additional Busy Lamp key than other service plans.
Note 2: Busy Lamp light ON indicates that the user of that particular extension is on
the phone, although you can still make calls to him/her.
1.3. Redial
a) Press to display the most recent number dialed from the phone.
b) Take the phone off-hook to dial.
Access redial list
a) Press to display the most recent number dialed from the phone.
b) Use and to scroll through the list (up to 100 latest entries) until the number
you want to call is displayed.
c) Take the phone off-hook.

Phone user guide
copyright © 2009 PCCW
Page 4 of 24
Delete redial list (for Boss/ Secretary/ Operator Plan phone users only)
a) Press to display the most recent number dialed from the phone.
b) Use and to scroll through the list (up to 100 latest entries) until the number
you want to delete is displayed.
c) Press the Delete button, or the Delete All button.
2. Receiving calls
2.1. Answer an incoming call
a) An incoming call causes the phone to ring. Lift the handset to answer (if using
hands- free speakerphone, press or the line button, e.g. “L1”)
2.2. Answer a new incoming call during a phone conversation
a) A new incoming call causes the line button (e.g. “L2”) to flash. Press “L2” to
answer the new call. The call on “L1” will be automatically placed on hold. If you
cannot answer the call, the caller will go to voicemail (providing the voicemail
feature has been configured on your extension).
b) To reconnect to the first call, press “L1”.
c) When juggling between calls, the phone automatically places your current call on
hold when you press a new line button.
d) If you have more than one call on hold, you can scroll through held call
information by pressing the and navigation buttons. You can reconnect
to a held call by pressing the appropriate line button.
2.3. Sending an incoming call to voicemail
You can send an incoming call directly to voicemail without answering. To do this,
press without picking up the handset. (If applicable, your secretary MUST also
press to have the call directed to voicemail)
If Fixed Mobile Convergence service is switched on, you MUST also reject the call
on your mobile to have the call directed to voicemail.

Phone user guide
copyright © 2009 PCCW
Page 5 of 24
3. Volume adjustment
3.1. Ringtone volume
Place the phone on-hook. Press to decrease volume or to
increase.
3.2. Voice volume
Take the phone off-hook. Press to decrease volume or to
increase.
4. Handling calls
4.1. Holding call
a) During a phone conversation, you can press to hold the call. The line
button light will begin to flash slowly.
b) To retrieve the call, press again.
4.2. Call forwarding
4.2.1. All call forwarding
For Boss / Secretary / Operator Plans:
a) Press the Call Fwd button.
b) Press the and navigation buttons to select All.
c) Press the Select button to change call forwarding status.
d) Press the and navigation buttons to select On / Off and press the
Select button.
e) To change the number to which calls should be forwarded, press the
Backspace button to delete original number. Then input the appropriate
number.
f) Press Done to confirm and save.
For Boss (Lite) / Secretary (Lite) / Executive Plans:
a) Press the Call Fwd button (on the up right corner of the phone screen).
b) Press the and navigation buttons to select All. Then press the
Enter button.

Phone user guide
copyright © 2009 PCCW
Page 6 of 24
c) Press the and navigation buttons to select ON / OFF. Then press
the Enter button. (Note: Before switching ON the feature, you must enter
a phone number to which calls should be forwarded in “Input CF Number”,
then press the Enter button)
4.2.2. Remote activate all call forwarding
You can remotely activate your call forwarding feature by using any phone.
a) Call 2205 1111 from any phone.
b) Enter your phone number, then press the #button.
c) Enter your passcode, then press the # button.
d) Now you can select from the following options:
1) Press [1] to access voicemail.
2) Press [2] to record your personal greetings.
3) Press [3] to activate your remote call-forwarding setting.
a. Press [1] to activate call forwarding.
b. Press [2] to deactivate call forwarding.
c. Press [3] to change your forwarding destination.
d. Press [4] to listen to your forwarding status.
4) Press [4] to change your passcode.
4.2.3. Busy call forwarding
For Boss / Secretary / Operator Plans:
a) Press the Call Fwd button.
b) Press the and navigation buttons to select Busy.
c) Press the Select button to change the call forwarding status.
d) Press the and navigation buttons to select On /Off and press the
Select button.
e) To change the number to which calls should be forwarded, press the
Backspace button to delete the original number. Then input the
appropriate number.
f) Press Done to confirm and save.
For Boss (Lite) / Secretary (Lite) / Executive Plans:
a) Press the Call Fwd button (on the up right corner of the phone screen).
b) Press the and navigation buttons to select Busy, then press the
Enter button.
c) Press the and navigation buttons to select On /Off, then press the
Enter button. (Note: Before switching ON the feature, you must enter a

Phone user guide
copyright © 2009 PCCW
Page 7 of 24
phone number to which calls should be forwarded in “Input CF Number”,
then press the Enter button)
4.2.4. No-answer call forwarding
For Boss / Secretary / Operator Plans:
To change the call-forwarding status
a) Press the Call Fwd button.
b) Press the and navigation buttons to select No Answer.
c) Press the Select button to change call forwarding status
d) Press the and navigation buttons to select On / Off and press the
Select button.
e) To change the number to which calls should be forwarded, press the
Backspace button to delete original number, and then input the
appropriate number.
f) Press Done to confirm and save.
To change the number of ring before call forwarded
a) Press the Call Fwd button.
b) Press the and navigation buttons to select No Answer, then press
the Select button.
c) Press the and navigation buttons to select No. of Ring, then press
the Select button.
d) Enter the number of ring before call forwarded, then press the Done
button.
For Boss (Lite) / Secretary (Lite) / Executive Plans:
To change the call-forwarding status
a) Press the Call Fwd button (on the up right corner of the phone screen).
b) Press the and navigation buttons to select No Answer, then press
the Enter button
c) Press the and navigation buttons to select On /Off, then press the
Enter button. (Note: Before switching ON the feature, you must enter a
phone number to which calls should be forwarded in “Input CF Number”,
then press the Enter button)
To change the number of ring before call forwarded
a) Press the Call Fwd button (on the up right corner of the phone screen).

Phone user guide
copyright © 2009 PCCW
Page 8 of 24
b) Press the and navigation buttons to select No Answer, then press
the Enter button.
c) Press the and navigation buttons to select No. of Ring, then press
the Select button.
d) Enter the number of ring before call forwarded, then press the Done
button.
4.3. Do-Not-Disturb (DND)
You can set Do-Not-Disturb (DND) status to prevent the phone from ringing in
response to incoming calls. These will be forwarded to your voicemail box.
a) Press the DND button (or enter the *01 feature access code and press Dial) to
activate the feature.
b) When status is ON, the DND light will illuminate.
c) To cancel, press the DND button again (or enter the #01 feature access code
and press Dial).
4.4. Transferring calls
4.4.1. Blind transfer (transfer a call to another phone number without consulting the
person who is to receive the call)
a) During a phone conversation, press the Transfer or button
(depending on your phone model).
b) Enter the phone number to which you want to transfer the call.
c) Press the Transfer or button again.
d) The call is transferred and you can put the handset on hook.
4.4.2. Consultation transfer (consult the person to whom you are transferring the call
before completing the transfer)
a) During a phone conversation, press the Transfer or button
(depending on your phone model).
b) Enter the phone number to which you want to transfer the call.
c) Press the Dial button to call the receiving party.
d) After consulting the receiving party, press the Transfer or button.
e) The call is transferred and you can put the handset on hook.
4.5. Conferencing calls (3-party conference calling is supported)

Phone user guide
copyright © 2009 PCCW
Page 9 of 24
a) When you begin a conference, you are recognized as the 1st party of the
conference.
b) Call 2nd party (or answer an incoming call from the 2nd party)
c) When 2nd party answers, you can consult with him/ her before adding him/ her to
the conference.
d) Press the Conference or button. A new line opens.
e) Enter the phone number of the 3rd party. Then press the Dial button.
f) When the 3rd party answers, you can consult with him/ her before adding him/ her
to the conference.
g) Press the Conference or button again to add the 3rd party to the
conference. 1st (yourself), 2nd and 3rd parties are all connected to a single
conference.
h) To drop a party from the conference, use the and to scroll through until it
displays the party, then press the Drop button.
i) To end the conference, press the button.
(Note: If either 2nd or 3rd party hangs up, the call will continue between the remaining
parties. However, if 1st party hangs up, the call will end; hence 2nd and 3rd parties will
not be connected.)
To join 2 active calls into a single conference:
a) Begin with active calls on two different lines (for example, “L1” and “L2” have
active calls).
b) Press the Line button for which you want to conference the two calls together
(e.g. “L1”)
c) Press the Conference or button.
d) Press the Line button that has the second active call (e.g. “L2”)
e) Press the Conference or button.
f) The 2 active calls are connected to a single conference call.
4.6. Call Park & Call Retrieve
During a phone call, you can park your call (Call Park) and pick it up on another phone
set within the company (Call Retrieve).
4.6.1. Call Park
a) When on a call, press the Park button (or press a free line button and
enter the *84 feature access code and press Dial).
b) When you hear the system prompt, press the #button.
c) Hang up.

Phone user guide
copyright © 2009 PCCW
Page 10 of 24
4.6.2. Call Retrieve
a) Using any phone set within the company other than your own, press the
Retrieve button (or enter the #84 feature access code and press Dial).
b) When you hear the system prompt, enter your extension number,
followed by the #button.
c) The call is re-connected.
4.7. Paging
You can form paging groups of users within your company. Once formed, group
members can turn on their speakerphones and converse with one another or as a group.
a) Enter the *77 feature access code, plus the <Paging Group No.> (For example,
to page paging group 12, enter *7712).
b) Press the Dial button.
4.8. Call pickup
4.8.1. Call pickup
You can also pick up an incoming call to anyone in your company by specifying
the extension of that person.
a) In the event of an incoming call being received by another phone set,
press the Pickup button of your own phone set (or enter the *21 feature
access code and press Dial).
b) Enter the extension number of that phone set then press the #button.
c) You will connect with the incoming call immediately.
4.8.2. Group pickup
A group of users can be formed into a “Pickup Group”, whereby users can pick
up a call from any phone set in the group.
a) An incoming call intended for a user in your “Pickup Group” can be picked
up by pressing the Gp Pickup button of your own phone set (or enter the
*11 feature access code and press Dial).
b) You will connect with the incoming call immediately.
4.8.3 Pickup calls for others with Busy Lamp
a) When an incoming call is delivered to a user whose extension is being
monitored by your Busy Lamp key, the Busy Lamp light will flash.

Phone user guide
copyright © 2009 PCCW
Page 11 of 24
b) Press the Busy Lamp key to pick up the call for that extension
accordingly.
Note 1: To pick up calls for others with Busy Lamp, your phone set must have
Busy Lamp keys assigned to monitor particular extensions.
Note 2: Operator Plan phone set includes the “Expansion Module”, which
allows the users to have additional Busy Lamp keys.
4.9. Boss and Sec incoming call handling
(only applicable to users subscribing to both Boss and Secretary Plans)
Boss and Sec enables a secretary to make and receive calls on Boss lines, as well as
to monitor Boss line status.
4.9.1. Secretary picks up an incoming call on Boss line
For Secretary / Secretary (Lite) Plans:
a) Press the Answer button or lift the handset or press the or
button (depending on your phone set model).
4.9.2. Secretary makes an outgoing call on the Boss line
For Secretary / Secretary (Lite) Plans:
a) Press the Boss Line button.
b) At the dial tone, enter the number you wish to call.
c) Press the Dial button to make call. (The phone of the other party will show
the incoming call that is from the boss)
d) To handover the call to the boss, press the button.
e) Then, the boss can press the flashing line button to connect with the call.
4.9.3. Push & Talk between Boss and Secretary:
a) Press the Push&Talk button.
b) Speak when the microphone is turned on.
5. Managing calls
5.1. Voicemail
a) Press the Voicemail button.
b) Follow the instructions prompt to listen to your voice message or change your
voicemail box settings.
(note: Voicemail can store 20 minutes of messages, each with a maximum duration of
one minute)

Phone user guide
copyright © 2009 PCCW
Page 12 of 24
5.2. Voicemail remote access
You can remotely access your voicemail box from any phone.
a) Call 2205 1111 from any phone.
b) Enter your phone number, then press the #button.
c) Enter your passcode, then press the #button.
d) Now you can select from the following options:
1) Press [1] to access voicemail box.
a. Press [1] to listen to voicemail.
b. Press [2] to record / change your busy greetings.
c. Press [3] to record / change your no answer greetings.
2) Press [2] to record your name for voicemail.
3) Press [3] to change your remote call-forwarding setting.
4) Press [4] to change your passcode.
5.3. Phone book
For Boss/ Secretary/ Operator Plans:
a) Press the Phonebook button.
b) Press the and navigation buttons to select Personal or Company. Then
press the Select button.
c) Press the and navigation buttons to scroll through phonebook entries.
d) Press Select button to dial.
For Boss(Lite) / Secretary (Lite) / Executive Plans:
a) Press the Phonebook button.
b) Press the and navigation buttons to select Personal or Company. Then
press the Enter button.
c) Press the and navigation buttons to scroll through the phonebook entries.
d) Press the Enter button to dial.
5.4. Call logs
For Boss/ Secretary/ Operator Plans:
a) Press the Call Logs button.
b) Press the and navigation buttons to select Missed, Incoming or
Outgoing,then press the Select button.
c) Press the and navigation buttons to scroll through the call logs.
d) Press the Select button to dial.

Phone user guide
copyright © 2009 PCCW
Page 13 of 24
For Boss(Lite) / Secretary (Lite) / Executive Plans:
a) Press the button.
b) Press the and navigation buttons to select Missed, Incoming or
Outgoing, then press the Enter button.
c) Press the and navigation buttons to scroll through the call logs.
d) Press the Enter button to dial.
c) Press the Push&Talk button.
d) Speak when the microphone is turned on.
6. Fixed / Mobile Convergence
This allows your mobile number to be called simultaneously when an incoming call rings
your desk phone. With this arrangement, you can pick up the call using either your desk
phone or mobile. You can also “pull” a call from your mobile to a desk phone, or vice versa,
without interrupting the call (to subscribe, please contact your PCCW account manager or
call one communications service hotline on 1833111) .
For instructions on turning on fixed-mobile convergence –simultaneous ring, please refer to
the web portal user guide.
6.1. Pick up simultaneous ring call
To pick up a call using your mobile phone:
a) Make sure the simultaneous ring feature is turned on (enabled) at your web
portal.
b) When your desk phone receives an incoming call, your mobile will ring
simultaneously.
c) An announcement on your mobile will ask you to press any key to pick up the call.
This indicates that the call is actually ringing your desk phone.
d) Press any key from 0 to 9 on your mobile to pick up the call.
e) You are now connected to the call.
6.2. Call pull
To pull a call from mobile to desk phone:
a) Make sure the simultaneous ring feature is turned ON (enabled) at your web
portal.
b) Make sure the call was made to your desk phone and has already been picked
up by your mobile phone.
c) Lift your desk phone handset or press the / button.

Phone user guide
copyright © 2009 PCCW
Page 14 of 24
d) Press the Call Pull button (for Boss/Secretary/Operator Plan holders) OR enter
the *88 feature access code, followed by the # button.
e) The call is now connected to your desk phone.
To pull a call from desk phone to mobile:
a) Make sure the fixed simultaneous ring feature is turned on (enabled) at your web
portal.
b) Pick up the call using your desk phone.
c) Using your mobile phone, place a call to 2513 1111.
d) An announcement will ask you to enter the destination digits.
e) Enter the *88 feature access code, followed by the # button.
f) The call is now connected to your mobile phone.
6.3. Mobile extension (this feature can only be used on designated handsets models)
Please contact your PCCW account manager or one communications service
hotline on 1833111 for details of designated mobile handset models.
6.3.1. How to activate Mobile Extension
To activate Mobile Extension service, please follow the steps below:
a) Insert the FMC SIM into mobile handset
b) After connecting to network, enter *137*138# then press dial
c) You will see “Your request is being processed. 您的指示正在處理中”while
activation is under way
d) Wait for 3-5 minutes, then the service is ready to go.
The Mobile Extension menu as shown below will be found on your handset by
pressing the Mobile Ext icon in your mobile menu.
Tips: For easy access to the menu, we recommend creating a shortcut on the main menu of your
mobile device.

Phone user guide
copyright © 2009 PCCW
Page 15 of 24
6.3.2. Change the language
Before using the service, you can change language. Default Mobile Extension
language is English.
To change the language, select the Language option.
1. English

Phone user guide
copyright © 2009 PCCW
Page 16 of 24
2. Traditional Chinese
3. Simplified Chinese

Phone user guide
copyright © 2009 PCCW
Page 17 of 24
6.3.3. Description of features
Features
功能
(繁體中文)
功能
(简体中文)
Description
Simultaneous
Ringing
(Sim Ring)
來電響鈴
来电响铃
System will ring corresponding mobile
for all incoming calls to desk phone
Call
Forwarding
來電轉駁
来电转驳
Forward all incoming calls to a specific
number or voicemail
Call Transfer
通話轉接
通话转接
Transfer a call to a specific number
while on a call
Call
Conference
電話會議
电话会议
Invite third parties to join a call and hold
a conference call
Call Pull
內線到手機
内线到手机
Pull the call from desk phone to mobile
while on a call
Voicemail
留言信箱
留言信箱
Access corporate voicemail via mobile
phone
6.3.4. Access voicemail
To check corporate voicemail using the Mobile Ext menu, select the “Voice
Mail” option. (note: User may be prompted to enter passcode if required by the
desk phone voice mail system).

Phone user guide
copyright © 2009 PCCW
Page 18 of 24
6.3.5. Call Forwarding
To forward all incoming desk phone calls, select the Call Forwarding option on
the Mobile Ext menu.
6.3.5.1. Forward All to …
a) User can forward all incoming desk phone calls to another number
(whether another extension or an external number, but not an IDD
number).
b) User must wait to hear the “forward successful”message before
ending the call.
6.3.5.2. Forward All to VM
a) User can forward all incoming desk phone calls to the voice mail
box.
b) User must wait to hear the “forward successful” message before
ending the call.
6.3.5.3. Cancel Forward All
a) Remotely cancel previously-set desk phone call forwarding.
b) User must wait to hear the “forward successful” message before
ending the call.

Phone user guide
copyright © 2009 PCCW
Page 19 of 24
6.3.6. Call Transfer
a) Select “Call Features” option in the Mobile Ext menu, then select „Call
Transfer‟
b) Entering destination number which could be an extension number, external
number or international call number, and press OK.
The party on hold for call transfer will be listening to music while on hold.
When the ring back tone is heard, the call transfer party can end the call and
the call will be transferred (blind transfer).

Phone user guide
copyright © 2009 PCCW
Page 20 of 24
6.3.7. Call Conference
a) Select the “Call Features” option in Mobile Ext Menu, then select “Call
Conference”.
b) Enter the conference party‟s number, which could be an extension number,
external number or international call number, and press OK.
c) Select “Join Conference”to merge the 2 calls for a conference. or
d) Select “Cancel Conference”to end the second call and connect back to the
first call again.
Note:
1. IDD calling while in call transfer and call conference should be:
0060[Country Code][Area Code][Phone Number]
2. The party on hold will be listening to music while on hold