Abb Relion 615 series User manual

RelionRelion

®®

Protection and ControlProtection and Control

IEC 61850IEC 61850

615 series615 series

Engineering GuideEngineering Guide

Document ID: 1MRS756475Document ID: 1MRS756475

Issued: 03.07.2009Issued: 03.07.2009

Revision: DRevision: D

Product version: 2.0Product version: 2.0

This document and parts thereof must not be reproduced or copied without writtenThis document and parts thereof must not be reproduced or copied without written

permission from ABB, and the permission from ABB, and the

contents thereof must not be imparted to contents thereof must not be imparted to

a thirda third

party, nor used for any uparty, nor used for any u

nauthorized purpose.nauthorized purpose.

The software or hardware described in The software or hardware described in

this document is furnished under a this document is furnished under a

licenselicense

and may be used, copied, or disclosed only in accordance with the terms of suchand may be used, copied, or disclosed only in accordance with the terms of such

license.license.

ABB and Relion are registered trademarks of ABB Group. All other brand orABB and Relion are registered trademarks of ABB Group. All other brand or

product names mentioned in this doproduct names mentioned in this do

cument may be trademarks or registeredcument may be trademarks or registered

trademarks of their respective holders.trademarks of their respective holders.

Please inquire about the tPlease inquire about the t

erms of guarantee from your nearest ABB erms of guarantee from your nearest ABB

representative.representative.

ABB OyABB Oy

Distribution AutomationDistribution Automation

P.O. Box 699P.O. Box 699

FI-65101 Vaasa, FinlandFI-65101 Vaasa, Finland

Telephone: +358 10 2211Telephone: +358 10 2211

Facsimile: +358 10 22 41094Facsimile: +358 10 22 41094

http://www.abb.com/substationautomationhttp://www.abb.com/substationautomation

The data, examples and diagrams in this manual are included solely for the conceptThe data, examples and diagrams in this manual are included solely for the concept

or product description and are not to be deemed as a statement of guaranteedor product description and are not to be deemed as a statement of guaranteed

properties. All persons responproperties. All persons respon

sible for applying the equipment addressible for applying the equipment addres

sed in thissed in this

manual must satisfy themselves that each intended application is suitable andmanual must satisfy themselves that each intended application is suitable and

acceptable, including that any applicable safety or other operational requirementsacceptable, including that any applicable safety or other operational requirements

are complied with. In particular, any risks in are complied with. In particular, any risks in

applications where a system failure and/applications where a system failure and/

or product failure would create a risk for harm to property or persons (including butor product failure would create a risk for harm to property or persons (including but

not limited to personal injuries or death) shall be the sole responsibility of thenot limited to personal injuries or death) shall be the sole responsibility of the

person or entity applying the equipmenperson or entity applying the equipmen

t, and those so responsibt, and those so responsib

le are herebyle are hereby

requested to ensure that all measures are taken to exclude or mitigate such risks.requested to ensure that all measures are taken to exclude or mitigate such risks.

This document has been carefully checked by ABB but deviations cannot beThis document has been carefully checked by ABB but deviations cannot be

completely ruled out. In case any errors are detected, the reader is kindly requestedcompletely ruled out. In case any errors are detected, the reader is kindly requested

to notify the manufacturer. Other than under explicit contractual commitments, into notify the manufacturer. Other than under explicit contractual commitments, in

no event shall ABB be responsible or liable for any loss or damage resulting fromno event shall ABB be responsible or liable for any loss or damage resulting from

the use of this manual or the application of the equipment.the use of this manual or the application of the equipment.

This product complies with the directive of the Council of the EuropeanThis product complies with the directive of the Council of the European

Communities on the approximation of the laws of the Member States relating toCommunities on the approximation of the laws of the Member States relating to

electromagnetic compatibility (EMC Directive 2004/108/EC) and electromagnetic compatibility (EMC Directive 2004/108/EC) and

concerningconcerning

electrical equipment for use within specified voltage limits (Low-voltage directiveelectrical equipment for use within specified voltage limits (Low-voltage directive

2006/95/EC). This conformity is the result of 2006/95/EC). This conformity is the result of

tests conducted by ABB intests conducted by ABB in

accordance with the product standards EN 50263 and EN 60255-26 for the EMCaccordance with the product standards EN 50263 and EN 60255-26 for the EMC

directive, and with the product standards EN 60255-6 and EN 60255-27 for the lowdirective, and with the product standards EN 60255-6 and EN 60255-27 for the low

voltage directive. The IED is designed in accordance with the internationalvoltage directive. The IED is designed in accordance with the international

standards of the IEC 60255 series.standards of the IEC 60255 series.

Dangerous voltages can occur on the Dangerous voltages can occur on the

connectors, even though theconnectors, even though the

auxiliary voltage has been disconnected.auxiliary voltage has been disconnected.

Non-observance can result in death, pNon-observance can result in death, p

ersonal injury or substantialersonal injury or substantial

property damage.property damage.

Only a competent electrician is allowed to carry out the electricalOnly a competent electrician is allowed to carry out the electrical

installation.installation.

National and local electrical safety regulations must always bNational and local electrical safety regulations must always b

followed.followed.

The frame of the IED has to be carefully earthed.The frame of the IED has to be carefully earthed.

When the plug-in unit has been detached from the case, do notWhen the plug-in unit has been detached from the case, do not

touch the inside of the case. The IED case internals may containtouch the inside of the case. The IED case internals may contain

high voltage potential and touching these may high voltage potential and touching these may

cause personal injury.cause personal injury.

The IED contains components which are sensitive to electrostaticThe IED contains components which are sensitive to electrostatic

discharge. Unnecessary touching of electronic components mustdischarge. Unnecessary touching of electronic components must

therefore be avoided.therefore be avoided.

Whenever changes are made in the IED, measures should be takenWhenever changes are made in the IED, measures should be taken

to avoid inadvertent tripping.to avoid inadvertent tripping.

This manual........................................................................................3This manual........................................................................................3

Intended audience..............................................................................3Intended audience..............................................................................3

Product documentatioProduct documentatio

n.........................................................n.........................................................

..............4..............4

Product documeProduct docume

ntation set...................................................ntation set...................................................

.........4.........4

Document revision history.............................................................5Document revision history.............................................................5

Related documentation..................................................................6Related documentation..................................................................6

Document symboDocument symbo

ls and conventions............................................ls and conventions............................................

......6......6

Safety indication symbols..............................................................6Safety indication symbols..............................................................6

Document conventions..................................................................6Document conventions..................................................................6

Connectivity paConnectivity pa

ckages......................................................................11ckages......................................................................11

PCM600 andPCM600 and

IED connectivity package version...............................12IED connectivity package version...............................12

CCT600 ...........................................................................................12CCT600 ...........................................................................................12

615 series imple615 series imple

mentation................................................................13mentation................................................................13

Information modInformation mod

el.............................................................................13el.............................................................................13

Vertical andVertical and

horizontal communhorizontal commun

ication....................................ication....................................

.........14.........14

PredefinePredefine

d vertical communicad vertical communica

tion data sets.................tion data sets.................

.............15.............15

Vertical cVertical c

ommunication diagnostic counters...............................16ommunication diagnostic counters...............................16

ParameteParamete

r setting and disturbance rer setting and disturbance re

corder..................corder..................

........................

......16......16

Horizontal coHorizontal co

mmunication................................................................17mmunication................................................................17

ConfiguriConfiguri

ng horizontal communication........................................17ng horizontal communication........................................17

GOOSE publishing properties..........................................................18GOOSE publishing properties..........................................................18

Configuring GOOSE ........................................................................19Configuring GOOSE ........................................................................19

Defining IEDs and exporting the SCD file....................................19Defining IEDs and exporting the SCD file....................................19

Creating an empty project...........................................................20Creating an empty project...........................................................20

Importing the SCD file.................................................................21Importing the SCD file.................................................................21

Configuring a GOOSE publisher.................................................23Configuring a GOOSE publisher.................................................23

Creating a GOOSE data set...................................................23Creating a GOOSE data set...................................................23

ConfigurinConfigurin

g a g a

GOOSE control block.......................................25GOOSE control block.......................................25

Configuring a GOOSE subscriber...............................................28Configuring a GOOSE subscriber...............................................28

Configuring GOOSE inputs....................................................28Configuring GOOSE inputs....................................................28

Finalizing GOOSE configuration..................................................30Finalizing GOOSE configuration..................................................30

Table of contentsTable of contents

Engineering GuideEngineering Guide

Exporting the SCL file.............................................................30Exporting the SCL file.............................................................30

Importing the SCL file.............................................................31Importing the SCL file.............................................................31

Connecting GOConnecting GO

OSE inputs to an IED applicaOSE inputs to an IED applica

tion........tion........

............

....33....33

Received GOOSE message handling..............................................34Received GOOSE message handling..............................................34

GOOSE supervision.........................................................................35GOOSE supervision.........................................................................35

BackgrounBackgroun

d sending......................................................d sending......................................................

..............35..............35

Default value handling.................................................................35Default value handling.................................................................35

Alarm supeAlarm supe

rvision in aprvision in ap

plication...................................plication...................................

...............36...............36

Diagnostic counters.....................................................................36Diagnostic counters.....................................................................36

Attaching the Attaching the

IEC 61850 cliIEC 61850 cli

ents to the busents to the bus

....................................................................

.....39.....39

Defining serveDefining serve

r IEDs.......................................................r IEDs.......................................................

..................41..................41

Defining the substatioDefining the substatio

n structure name..............................n structure name..............................

..............43..............43

Table of contentsTable of contents

Engineering GuideEngineering Guide

Engineering Guide provides information for IEC 61850 engineering of Engineering Guide provides information for IEC 61850 engineering of

the 615the 615

series protection IEDs with PCM600 series protection IEDs with PCM600

and CCT600. This quide concentratesand CCT600. This quide concentrates

especially on the configuration of GOOSE communication with these tools. Theespecially on the configuration of GOOSE communication with these tools. The

guide can be used as a technical reference during the engineering phase,guide can be used as a technical reference during the engineering phase,

installation and commissioning phase, and during normal service. installation and commissioning phase, and during normal service.

For more detailsFor more details

on tool usage, see the PCM600 documentation.on tool usage, see the PCM600 documentation.

This manual addresses the system engineers and installation This manual addresses the system engineers and installation

and commissioningand commissioning

personnel.personnel.

The system engineer must have a The system engineer must have a

thorough knowledge of protection systems,thorough knowledge of protection systems,

protection equipment, protection functions anprotection equipment, protection functions an

d the configured functional logic ind the configured functional logic in

the IEDs. The installation the IEDs. The installation

and commissioning personnel must have basicand commissioning personnel must have basic

knowledge of how to handle the electronic equipment.knowledge of how to handle the electronic equipment.

1MRS756475 D1MRS756475 D

Section 1Section 1

IntroductionIntroduction

Engineering GuideEngineering Guide

PP

ll

aa

nn

ii

nn

gg

&&

pp

uu

rr

cc

hh

aa

ss

ee

EE

nn

gg

ii

nn

ee

rr

ii

nn

gg

II

nn

ss

tt

aa

ll

ii

nn

gg

CC

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

OO

pp

ee

rr

aa

tt

ii

oo

nn

MM

aa

ii

nn

tt

ee

nn

aa

nn

cc

ee

DD

ee

cc

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

dd

ee

ii

nn

ss

tt

aa

ll

ii

nn

gg

&&

dd

ii

ss

pp

oo

ss

aa

ll

Application Application

manualmanual

Operation manualOperation manual

Installation manualInstallation manual

Service manualService manual

Engineering manualEngineering manual

Commissioning manualCommissioning manual

Communication protocolCommunication protocol

manualmanual

Technical manualTechnical manual

PP

ll

aa

nn

ii

nn

gg

&&

pp

uu

rr

cc

hh

aa

ss

ee

EE

nn

gg

ii

nn

ee

rr

ii

nn

gg

II

nn

ss

tt

aa

ll

ii

nn

gg

CC

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

OO

pp

ee

rr

aa

tt

ii

oo

nn

MM

aa

ii

nn

tt

ee

nn

aa

nn

cc

ee

DD

ee

cc

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

dd

ee

ii

nn

ss

tt

aa

ll

ii

nn

gg

&&

dd

ii

ss

pp

oo

ss

aa

ll

PP

ll

aa

nn

ii

nn

gg

&&

pp

uu

rr

cc

hh

aa

ss

ee

EE

nn

gg

ii

nn

ee

rr

ii

nn

gg

II

nn

ss

tt

aa

ll

ii

nn

gg

CC

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

OO

pp

ee

rr

aa

tt

ii

oo

nn

MM

aa

ii

nn

tt

ee

nn

aa

nn

cc

ee

DD

ee

cc

oo

mm

ii

ss

ii

oo

nn

ii

nn

gg

dd

ee

ii

nn

ss

tt

aa

ll

ii

nn

gg

&&

dd

ii

ss

pp

oo

ss

aa

ll

Application Application

manualmanual

Application Application

manualmanual

Operation manualOperation manualOperation manualOperation manual

Installation manualInstallation manualInstallation manualInstallation manual

Service manualService manualService manualService manual

Engineering manualEngineering manualEngineering manualEngineering manual

Commissioning manualCommissioning manualCommissioning manualCommissioning manual

Communication protocolCommunication protocol

manualmanual

Communication protocolCommunication protocol

manualmanual

Technical manualTechnical manualTechnical manualTechnical manual

en07000220.vsden07000220.vsd

IEC07000220 V1 ENIEC07000220 V1 EN

FiFi

gugu

re re

1:1:

ThTh

e ie i

ntnt

enen

dede

d ud u

se se

of of

mama

nunu

alal

s is i

n dn d

ifif

fefe

rere

nt nt

lili

fefe

cycy

clcl

eses

Engineering Manual contains instructions on how to Engineering Manual contains instructions on how to

engineer the IEDs. Theengineer the IEDs. The

manual provides instructions on how to use manual provides instructions on how to use

the different tools for IED the different tools for IED

engineering.engineering.

It also includes instructions on how to handle the tool component available to readIt also includes instructions on how to handle the tool component available to read

disturbance files from the IEDs on the basis of the IEC 61850 definitions. It furtherdisturbance files from the IEDs on the basis of the IEC 61850 definitions. It further

introduces the diagnostic tool components available for IEDs and the introduces the diagnostic tool components available for IEDs and the

PCM600 tool.PCM600 tool.

Installation Manual contains instructions on how to install the IED. The manualInstallation Manual contains instructions on how to install the IED. The manual

provides procedures for provides procedures for

mechanical and electrical installation. The chapters aremechanical and electrical installation. The chapters are

organized in chronological order in which the IED should be installed.organized in chronological order in which the IED should be installed.

Commissioning Manual contains instructions on how to commission the Commissioning Manual contains instructions on how to commission the

IED. TheIED. The

manual can also be used as a reference during periodic testing. The manualmanual can also be used as a reference during periodic testing. The manual

provides procedures for provides procedures for

energizing and checking of external circuitry, energizing and checking of external circuitry,

setting andsetting and

configuration as well as verifying settings configuration as well as verifying settings

and performing directional tests. Theand performing directional tests. The

Section 1Section 1

1MRS756475 D1MRS756475 D

IntroductionIntroduction

Engineering GuideEngineering Guide

chapters are organized in chronological order in which the IED should bechapters are organized in chronological order in which the IED should be

commissioned.commissioned.

Operation Manual contains instructions on how to operate the IED once it has beenOperation Manual contains instructions on how to operate the IED once it has been

commissioned. The manual provides instructions for monitoring, controlling andcommissioned. The manual provides instructions for monitoring, controlling and

setting the IED. The manual also describes how to identify disturbances and how tosetting the IED. The manual also describes how to identify disturbances and how to

view calculated and measured network data to determine the cause of a fault.view calculated and measured network data to determine the cause of a fault.

Service Manual contains instructions on how to service and maintain the IED. TheService Manual contains instructions on how to service and maintain the IED. The

manual also provides procedures for de-energizing, de-commissioning and disposalmanual also provides procedures for de-energizing, de-commissioning and disposal

of the IED.of the IED.

Application Manual contains application descriptions and Application Manual contains application descriptions and

setting guidelines sortedsetting guidelines sorted

per function. The manual can be used per function. The manual can be used

to find out when and for what purpoto find out when and for what purpo

se ase a

typical protection function can be used. The manual can also be used whentypical protection function can be used. The manual can also be used when

calculating settings.calculating settings.

Technical Manual contains application and functionality descriptions and listsTechnical Manual contains application and functionality descriptions and lists

function blocks, logic diagrams, input and output function blocks, logic diagrams, input and output

signals, setting parameters andsignals, setting parameters and

technical data sorted per function. The manual can be used as a technical referencetechnical data sorted per function. The manual can be used as a technical reference

during the engineering phase, installation and during the engineering phase, installation and

commissioning phase, and duringcommissioning phase, and during

normal service.normal service.

Communication Protocol Manual describes a communication protocol Communication Protocol Manual describes a communication protocol

supportedsupported

by the IED. The manual concentrates on venby the IED. The manual concentrates on ven

dor-specific implementations.dor-specific implementations.

Point List Manual describes the outlook and properties of the data points specific toPoint List Manual describes the outlook and properties of the data points specific to

the IED. The manual should be used in conjunction with the correspondingthe IED. The manual should be used in conjunction with the corresponding

Communication Protocol Manual.Communication Protocol Manual.

Some of the manuals are not available yet.Some of the manuals are not available yet.

A/30.05.2008A/30.05.2008

1.11.1

First releaseFirst release

t t

d d

o o

d d

o o

product series versionproduct series version

t t

Download the latest documents from the ABB web siteDownload the latest documents from the ABB web site

http://http://

www.abb.com/substationautomationwww.abb.com/substationautomation

1MRS756475 D1MRS756475 D

Section 1Section 1

IntroductionIntroduction

Engineering GuideEngineering Guide

C C

0 0

s s

e e

t t

((

))

IEIE

C 6C 6

1818

50 50

ProPro

toto

coco

l Il I

mpmp

lele

meme

ntnt

atat

ioio

n n

eXeX

trtr

a Ia I

nfnf

oror

mama

titi

on on

(PI(PI

XIXI

T)T)

1M1M

RSRS

7575

6464

6565

IEC 61850 Protocol Implementation Conformance StatementIEC 61850 Protocol Implementation Conformance Statement

(PICS)(PICS)

1MRS7564661MRS756466

IEC 61IEC 61

850 M850 M

odel Iodel I

mplemmplem

entatentat

ion Coion Co

nformnform

ance Sance S

tatemtatem

ent (Ment (M

ICS)ICS)

1MRS71MRS7

5646756467

Product series- and product-specific manuals can be Product series- and product-specific manuals can be

downloaded from the ABBdownloaded from the ABB

web siteweb site

http://www.abb.com/substationautomationhttp://www.abb.com/substationautomation

This publication includes icons that point This publication includes icons that point

out safety-related conditions or otherout safety-related conditions or other

important information.important information.

The caution icon indicates important information or warning relatedThe caution icon indicates important information or warning related

to the concept discussed in the text. It might indicate the presenceto the concept discussed in the text. It might indicate the presence

of a hazard which could result in corruption of software or damageof a hazard which could result in corruption of software or damage

to equipment or property.to equipment or property.

The information icon alerts the reader to important facts andThe information icon alerts the reader to important facts and

conditions.conditions.

The tip icon indicates advice on, for example, how to design yourThe tip icon indicates advice on, for example, how to design your

project or how to use a certain function.project or how to use a certain function.

Although warning hazards are related to Although warning hazards are related to

personal injury, it should be understoodpersonal injury, it should be understood

that operation of damaged equipment could, that operation of damaged equipment could,

under certain operational conditions,under certain operational conditions,

result in degraded process performance leading to result in degraded process performance leading to

personal injury or death.personal injury or death.

Therefore, comply fully with all warning and caution notices.Therefore, comply fully with all warning and caution notices.

••

AbbAbb

revrev

iatiiati

ons ons

and aand a

crocro

nymnym

s in ts in t

his his

manman

ual aual a

re sre s

pelpel

led oled o

ut in ut in

GloGlo

ssassa

ry.ry.

Glossary also contains definitions of important terms.Glossary also contains definitions of important terms.

••

HMI HMI

meme

nu pnu p

atat

hs ahs a

re pre p

rere

sese

ntnt

ed ied i

n bon bo

ldld

, fo, fo

r exr ex

amam

plpl

e:e:

Section 1Section 1

1MRS756475 D1MRS756475 D

IntroductionIntroduction

Engineering GuideEngineering Guide

SelectSelect

Main menu/InformationMain menu/Information

••

PaPa

rara

meme

tete

r nar na

meme

s ars ar

e she sh

owow

n in n in

itit

alal

icsics

, fo, fo

r exr ex

amam

plpl

e:e:

The function can be enabled and disabled with theThe function can be enabled and disabled with the

OperationOperation

setting.setting.

••

ParPar

ameame

ter ter

valval

ues ues

are are

indind

icaica

ted ted

with with

quoquo

tattat

ion ion

marmar

ks, ks,

for for

exaexa

mplmpl

e:e:

The corresponding parameter values are "On" and The corresponding parameter values are "On" and

"Off"."Off".

••

IED iIED i

npunpu

t/ot/o

utputp

ut meut me

ssss

ageage

s and ms and m

onioni

tortor

ed daed da

ta nata na

mes ames a

re shre sh

own iown i

n Con Co

uriuri

erer

font, for example:font, for example:

When the function starts, theWhen the function starts, the

STARTSTART

output is set to TRUE.output is set to TRUE.

1MRS756475 D1MRS756475 D

Section 1Section 1

IntroductionIntroduction

Engineering GuideEngineering Guide

The international IEC 61850 standard defines a The international IEC 61850 standard defines a

framework for substationframework for substation

communications networks and systems. The standard consists of several partscommunications networks and systems. The standard consists of several parts

ranging from the requirements on substation automation systems to ranging from the requirements on substation automation systems to

the details of athe details of a

communication protocol.communication protocol.

One major difference between the other communication protocols applied inOne major difference between the other communication protocols applied in

substation automation and IEC 61850 is that the latter is not only a communicationsubstation automation and IEC 61850 is that the latter is not only a communication

protocol, but a whole framework for sprotocol, but a whole framework for s

pecifying, engineering and operatingpecifying, engineering and operating

substation automation systems. The communication part covers the substation automation systems. The communication part covers the

connectionconnection

between the IEDs and the substation level, fasbetween the IEDs and the substation level, fas

t peer-to-peer communicationt peer-to-peer communication

between the IEDs and communication to sensbetween the IEDs and communication to sens

ors and actuatorsors and actuators

n n

d d

n n

d d

l l

m m

d d

t t

n n

s s

d d

managementmanagement

icic

n rn r

irir

s fs f

r fr f

s as a

device modelsdevice models

RequirementsRequirements

igig

n n

crcr

n n

e e

rr

communication in electrical substations related tocommunication in electrical substations related to

IEDsIEDs

Impact on engineeringImpact on engineering

7-1…7-1…

7-47-4

Basic communication structure for substation andBasic communication structure for substation and

feeder equipment (data model and services)feeder equipment (data model and services)

Modelling and servicesModelling and services

; ;

k k

, ,

k k

n n

s s

; ;

k k

, ,

k k

s s

e e

t t

n n

The IEC 61850 standard specifies an expandable data The IEC 61850 standard specifies an expandable data

model and services formodel and services for

substation automation (standard parts 7-x). The standard does not substation automation (standard parts 7-x). The standard does not

specify anyspecify any

protection or control functions, but sprotection or control functions, but s

pecifies how the functions expose pecifies how the functions expose

theirtheir

information to a communication network.information to a communication network.

The standard supports free allocation of functions tThe standard supports free allocation of functions t

o devices. With efficiento devices. With efficient

communication facilities, the functions can be located anywhere in the system, thatcommunication facilities, the functions can be located anywhere in the system, that

is, an interlocking function can reside in the IED or on the station level.is, an interlocking function can reside in the IED or on the station level.

Additionally, the standard is open Additionally, the standard is open

for different system philosophies, that is,for different system philosophies, that is,

different integration levels and allocation of functions to different devices isdifferent integration levels and allocation of functions to different devices is

supported.supported.

1MRS756475 D1MRS756475 D

Section 2Section 2

IEC 61850 overviewIEC 61850 overview

Engineering GuideEngineering Guide

The standard also defines a description lThe standard also defines a description l

anguage for substation automationanguage for substation automation

systems. The language facilitates efficient integration of devices into systems in ansystems. The language facilitates efficient integration of devices into systems in an

automated fashion. Additionally the standard supports a comprehensive andautomated fashion. Additionally the standard supports a comprehensive and

consistent system definition and engineering, which makes not consistent system definition and engineering, which makes not

only the devices,only the devices,

but also their tools and systems but also their tools and systems

interoperable (standard part 6).interoperable (standard part 6).

The standard uses Ethernet and TCP/IP The standard uses Ethernet and TCP/IP

for communication. Since Ethernet and TCP/for communication. Since Ethernet and TCP/

IP are widely accepted and used, the application of these technologies provide aIP are widely accepted and used, the application of these technologies provide a

broad range of features from broad range of features from

mainstream communication (standard parts mainstream communication (standard parts

8-1, 9-2).8-1, 9-2).

Therefore, IEC 61850 is also open for Therefore, IEC 61850 is also open for

possible new communication concepts in thepossible new communication concepts in the

future.future.

Data model (objects, sevices)Data model (objects, sevices)

Client serverClient server

communicationcommunication

GOOSEGOOSE

SampledSampled

valuesvalues

MappingMapping

Real-timeReal-time

communicationcommunication

MMSMMS

TCPTCP

IPIP

Ethernet link layerEthernet link layer

Ethernet physical layer with priority tagging (100 Mbit/s)Ethernet physical layer with priority tagging (100 Mbit/s)

GUID-A9FD9579-37AD-4B03-9GUID-A9FD9579-37AD-4B03-9

35E-BF39D48B7211 V1 35E-BF39D48B7211 V1

ENEN

FiFi

gugu

re re

2:2:

CoCo

mmmm

unun

icic

atat

ioio

n n

stst

acac

ks ks

anan

d d

mama

pppp

inin

g g

usus

ed ed

in in

IEIE

C 6C 6

1818

5050

AbstraAbstra

ct cct c

ommuommu

nicationicatio

n sn s

ervices ervices

interfinterf

ace ace

(ACSI)(ACSI)

StSt

acac

k k

inin

tete

rfrf

acac

SOSO

/O/O

SI SI

stst

acac

Section 2Section 2

1MRS756475 D1MRS756475 D

IEC 61850 overviewIEC 61850 overview

1010

Engineering GuideEngineering Guide

Protection and Control IED Manager PCM600 offers all the necessary functionalityProtection and Control IED Manager PCM600 offers all the necessary functionality

to work throughout all stages of the IED life cycle.to work throughout all stages of the IED life cycle.

••

OpOp

erer

atat

ioio

n ann an

d did di

stst

urur

baba

ncnc

e hae ha

ndnd

lili

ngng

••

l al a

With the individual tool With the individual tool

components, you can perform different tasks and functionscomponents, you can perform different tasks and functions

and control the whole substation. PCM600 can operate with many differentand control the whole substation. PCM600 can operate with many different

topologies depending on customer needs.topologies depending on customer needs.

For more information, see PCM600 documentation.For more information, see PCM600 documentation.

Connectivity package is a collection of software and information related to aConnectivity package is a collection of software and information related to a

specific protection and control terminal specific protection and control terminal

providing system products and tools toproviding system products and tools to

connect and interact with the IED.connect and interact with the IED.

Connectivity Package Manager is a tool that helps the user to define the rightConnectivity Package Manager is a tool that helps the user to define the right

connectivity package versions for different system products and tools. connectivity package versions for different system products and tools.

ConnectivityConnectivity

Package Manager is included in Package Manager is included in

products supporting the connectivity concept.products supporting the connectivity concept.

Use the connectivity packages to create configuration structure in PCM600. InUse the connectivity packages to create configuration structure in PCM600. In

addition to other products supporting connectivity concept, the addition to other products supporting connectivity concept, the

connectivityconnectivity

packages for PCM600 contain:packages for PCM600 contain:

••

DesDes

cricri

ptipti

on of Ion of I

ED's ED's

intint

ernern

al paal pa

ramram

etereter

s and ts and t

heihei

r pror pro

perper

tietie

s sucs suc

h as dh as d

ataata

format, unit, setting range, visibility and format, unit, setting range, visibility and

access rights. The description textsaccess rights. The description texts

can be translated into other languages as well.can be translated into other languages as well.

••

SofSof

twartwar

e come com

ponpon

entent

s thas tha

t adat ada

pt thpt th

e IEDe IED

-sp-sp

ecieci

fic ific i

ntente

rfarfa

ces tces t

o the so the s

tantan

dardar

interfaces of system products and tools such as interfaces of system products and tools such as

IED-specific dispatchers forIED-specific dispatchers for

tools. This means that there is a protocol-specific adaptation for the parametertools. This means that there is a protocol-specific adaptation for the parameter

setting and disturbance handling tool components, for example setting and disturbance handling tool components, for example

disturbancedisturbance

uploading according to COMTRADE.uploading according to COMTRADE.

1MRS756475 D1MRS756475 D

Section 3Section 3

PCM600 toolPCM600 tool

1111

Engineering GuideEngineering Guide

••

ProPro

tectec

tiotio

n ann an

d Cod Co

ntrntr

ol Iol I

ED MED M

anaana

ger ger

PCMPCM

600 600

VerVer

. 2.. 2.

0 SP0 SP

2 or 2 or

latlat

erer

••

RERE

D6D6

15 15

CoCo

nnnn

ecec

tivtiv

ity ity

PacPac

kaka

ge Vge V

erer

. 2. 2

.5 .5

or lor l

atat

erer

••

RERE

F6F6

15 15

CoCo

nnnn

ecec

titi

vivi

ty ty

PacPac

kaka

ge Vge V

erer

. 2. 2

.5 o.5 o

r lar la

tete

rr

••

RERE

M6M6

15 15

CoCo

nnnn

ecec

tivtiv

ity ity

PacPac

kaka

ge Vge V

erer

. 2. 2

.5 .5

or lor l

atat

erer

••

RERE

T6T6

15 C15 C

onon

nene

ctct

iviv

ity ity

PaPa

ckck

agag

e Vee Ve

r. r.

2.2.

5 o5 o

r lar la

tete

rr

Download connectivity packages from the ABB web siteDownload connectivity packages from the ABB web site

http://http://

www.abb.com/substationautomationwww.abb.com/substationautomation

IEC 61850 also affects the engineering of IEC 61850 also affects the engineering of

the devices. PCM600 Engineering Pro,the devices. PCM600 Engineering Pro,

including the communication configuration tool CCT600, is needed including the communication configuration tool CCT600, is needed

to engineer anto engineer an

IEC 61850 system with the 615 IEC 61850 system with the 615

series IEDs.series IEDs.

CCT600 acts as a system tool which is used to define and share the system-wideCCT600 acts as a system tool which is used to define and share the system-wide

parameters, such as communication adparameters, such as communication ad

dresses, horizontal communication ddresses, horizontal communication d

ata andata and

its priorities and client/server (system level/IED) its priorities and client/server (system level/IED)

connections. The actualconnections. The actual

configuration of the IED and configuration of the IED and

the downloading of configuration changes are donethe downloading of configuration changes are done

with PCM600.with PCM600.

Section 3Section 3

1MRS756475 D1MRS756475 D

PCM600 toolPCM600 tool

1212