ABB Relion SMU615 User manual

—
RELION®
Substation Merging Unit
SMU615
Technical Manual

Document ID: 1MRS758407
Issued: 2019-05-17
Revision: B
Product version: 1.0
© Copyright 2019 ABB. All rights reserved

Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third party,
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
www.abb.com/substationautomation

Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or
product description and are not to be deemed as a statement of guaranteed properties.
All persons responsible for applying the equipment addressed in this manual must
satisfy themselves that each intended application is suitable and acceptable, including
that any applicable safety or other operational requirements are complied with. In
particular, any risks in applications where a system failure and/or product failure
would create a risk for harm to property or persons (including but not limited to
personal injuries or death) shall be the sole responsibility of the person or entity
applying the equipment, and those so responsible are hereby requested to ensure that
all measures are taken to exclude or mitigate such risks.
This product has been designed to be connected and communicate data and
information via a network interface which should be connected to a secure network.
It is the sole responsibility of the person or entity responsible for network
administration to ensure a secure connection to the network and to take the necessary
measures (such as, but not limited to, installation of firewalls, application of
authentication measures, encryption of data, installation of anti virus programs, etc.)
to protect the product and the network, its system and interface included, against any
kind of security breaches, unauthorized access, interference, intrusion, leakage and/or
theft of data or information. ABB is not liable for any such damages and/or losses.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested to
notify the manufacturer. Other than under explicit contractual commitments, in no
event shall ABB be responsible or liable for any loss or damage resulting from the use
of this manual or the application of the equipment.

Conformity
This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for
use within specified voltage limits (Low-voltage directive 2014/35/EU). This
conformity is the result of tests conducted by ABB in accordance with the product
standard EN 60255-26 for the EMC directive, and with the product standards EN
60255-1 and EN 60255-27 for the low voltage directive. The product is designed in
accordance with the international standards of the IEC 60255 series.

Table of contents
Section 1 Introduction.....................................................................11
This manual...................................................................................... 11
Intended audience............................................................................ 11
Product documentation.....................................................................12
Product documentation set..........................................................12
Document revision history........................................................... 12
Related documentation................................................................12
Symbols and conventions.................................................................13
Symbols.......................................................................................13
Document conventions................................................................ 13
Functions, codes and symbols.................................................... 14
Section 2 SMU615 overview.......................................................... 17
Overview...........................................................................................17
Product version history................................................................ 17
PCM600 and merging unit's connectivity package version......... 17
Local HMI......................................................................................... 17
LEDs............................................................................................18
Keypad........................................................................................ 18
Web HMI...........................................................................................19
Authorization.....................................................................................20
Audit trail......................................................................................21
Communication.................................................................................23
Ethernet redundancy................................................................... 24
Process bus.................................................................................26
Secure communication................................................................ 30
Section 3 Basic functions............................................................... 31
General parameters..........................................................................31
Self-supervision................................................................................ 35
Internal faults............................................................................... 35
Warnings..................................................................................... 37
Programmable LEDs........................................................................ 38
Function block............................................................................. 38
Functionality................................................................................ 38
Signals.........................................................................................41
Settings........................................................................................43
Monitored data.............................................................................44
Time synchronization........................................................................45
Time master supervision GNRLLTMS.........................................45
Table of contents
SMU615 1
Technical Manual

Function block........................................................................ 45
Functionality........................................................................... 45
Signals....................................................................................46
Settings.................................................................................. 46
Test mode.........................................................................................48
Function blocks............................................................................48
Functionality................................................................................ 48
Application configuration and Test mode.................................... 49
Control mode............................................................................... 49
Application configuration and Control mode................................50
Authorization................................................................................50
LHMI indications.......................................................................... 50
Signals.........................................................................................51
Nonvolatile memory..........................................................................51
Sensor inputs for currents and voltages........................................... 52
Binary input.......................................................................................54
Binary input filter time.................................................................. 54
Binary input inversion.................................................................. 55
Oscillation suppression................................................................55
Binary outputs...................................................................................55
Power output contacts ................................................................ 56
Dual single-pole power outputs PO1 and PO2.......................56
Double-pole power outputs PO3 and PO4 with trip circuit
supervision............................................................................. 57
Dual single-pole high-speed power outputs HSO1, HSO2
and HSO3...............................................................................58
Signal output contacts ................................................................ 59
Internal fault signal output IRF .............................................. 59
Signal outputs SO1 and SO2 in power supply module.......... 60
SMV function blocks......................................................................... 60
IEC 61850-9-2 LE sampled values sending SMVSENDER........ 61
Functionality........................................................................... 61
Settings.................................................................................. 61
xLTxTR function block................................................................. 61
Function block........................................................................ 61
Operation principle................................................................. 61
Signals....................................................................................61
Settings.................................................................................. 62
RESTCTR function block.............................................................63
Function block........................................................................ 63
Settings.................................................................................. 63
GOOSE function blocks....................................................................63
GOOSERCV_BIN function block................................................. 64
Function block........................................................................ 64
Table of contents
2SMU615
Technical Manual

Functionality........................................................................... 64
Signals....................................................................................64
GOOSERCV_DP function block.................................................. 64
Function block........................................................................ 64
Functionality........................................................................... 64
Signals....................................................................................65
GOOSERCV_INT8 function block............................................... 65
Function block........................................................................ 65
Functionality........................................................................... 65
Signals....................................................................................65
GOOSERCV_INTL function block............................................... 65
Function block........................................................................ 65
Functionality........................................................................... 66
Signals....................................................................................66
GOOSERCV_ENUM function block............................................ 66
Function block........................................................................ 66
Functionality........................................................................... 66
Signals....................................................................................66
GOOSERCV_INT32 function block............................................. 67
Function block........................................................................ 67
Functionality........................................................................... 67
Signals....................................................................................67
Type conversion function blocks...................................................... 67
QTY_GOOD function block......................................................... 67
Function block........................................................................ 67
Functionality........................................................................... 67
Signals....................................................................................68
QTY_BAD function block............................................................. 68
Function block........................................................................ 68
Functionality........................................................................... 68
Signals....................................................................................68
QTY_GOOSE_COMM function block.......................................... 69
Function block........................................................................ 69
Functionality........................................................................... 69
Signals....................................................................................69
T_HEALTH function block........................................................... 70
Function block........................................................................ 70
Functionality........................................................................... 70
Signals....................................................................................70
T_F32_INT8 function block..........................................................71
Function block........................................................................ 71
Functionality........................................................................... 71
Signals....................................................................................71
Table of contents
SMU615 3
Technical Manual

T_DIR function block................................................................... 71
Function block........................................................................ 71
Functionality........................................................................... 71
Signals....................................................................................72
T_TCMD function block............................................................... 72
Function block........................................................................ 72
Functionality........................................................................... 72
Signals....................................................................................73
T_TCMD_BIN function block....................................................... 73
Function block........................................................................ 73
Functionality........................................................................... 73
Signals....................................................................................73
T_BIN_TCMD function block....................................................... 74
Function block........................................................................ 74
Functionality........................................................................... 74
Signals....................................................................................74
Configurable logic blocks..................................................................75
Standard configurable logic blocks..............................................75
OR function block................................................................... 75
AND function block.................................................................77
XOR function block.................................................................79
NOT function block.................................................................80
MAX3 function block...............................................................80
MIN3 function block................................................................81
R_TRIG function block........................................................... 82
F_TRIG function block............................................................82
T_POS_XX function blocks.................................................... 83
SWITCHR function block........................................................84
SWITCHI32 function block..................................................... 85
SR function block................................................................... 86
RS function block................................................................... 87
Minimum pulse timer................................................................... 88
Minimum pulse timer TPGAPC.............................................. 88
Minimum pulse timer TPSGAPC............................................ 89
Minimum pulse timer TPMGAPC........................................... 91
Pulse timer PTGAPC...................................................................92
Function block........................................................................ 92
Functionality........................................................................... 92
Signals....................................................................................92
Settings.................................................................................. 93
Technical data........................................................................ 93
Time delay off (8 pcs) TOFGAPC................................................94
Function block........................................................................ 94
Table of contents
4SMU615
Technical Manual