ABB M1M 30 Series User manual

M1M 30 User manual 2CSG445091D0201
Power meter
M1M 30
User manual

M1M 30 POWER METER USER MANUAL 3
Table of Contents
1.General information..............................................................................................5
1.1.Use and storage of the manual.............................................................................5
1.2.Copyright ..................................................................................................................5
1.3.Liability disclaimer..................................................................................................5
1.4.General safety warnings ........................................................................................5
1.5.Cyber Security Disclaimer......................................................................................6
2.Packaging contents.............................................................................................. 7
3.Technical characteristics .....................................................................................8
3.1.Description of the device ......................................................................................8
3.2.Main functionalities................................................................................................8
3.3.Versions.....................................................................................................................8
3.4.Overall dimensions .................................................................................................9
3.5.Technical data ........................................................................................................10
4.Installation .......................................................................................................... 12
4.1.Assembly................................................................................................................. 12
4.2.Disassembly........................................................................................................... 13
4.3.Wiring diagrams....................................................................................................14
5.Access to device ................................................................................................. 17
5.1.Display ..................................................................................................................... 17
5.2.Buttons ...................................................................................................................19
5.3.Data entry.............................................................................................................. 20
6.First commissioning........................................................................................... 23
6.1.Password for the first use (PASS) ......................................................................23
6.2.Real Time Clock (RTC) ..........................................................................................24
6.3.Wiring (WIRI) ..........................................................................................................24
6.4.CT ratio (CT) ..........................................................................................................25
6.5.VT ratio (VT)...........................................................................................................26
7.Configuration (CONF)......................................................................................... 27
7.1.Unit (UNIT) ..............................................................................................................28
7.2.Installation (INSTL) ............................................................................................... 31
7.3.Historicals (HIST) ..................................................................................................32
7.4.Input / output (I/O)............................................................................................. 34
7.5.Alarms (ALM) .........................................................................................................36
7.6.Communication (COMM) .................................................................................... 42

4M1M 30 POWER METER USER MANUAL
8.Data reading (READ) ..........................................................................................45
8.1.Realtime (REAL) .................................................................................................... 45
8.2.Energy (ENRG) .......................................................................................................47
8.3.Power Quality (PWQT)......................................................................................... 48
8.4.Average values (AVG) .......................................................................................... 49
8.5.Maximum values (MAX) ...................................................................................... 50
8.6.Minimum values (MIN).........................................................................................51
8.7.I/O ............................................................................................................................52
8.8.Notifications (NOTF)............................................................................................53
8.9.LOG......................................................................................................................... 56
8.10.Timers (TIME).......................................................................................................57

5
M1M 30 POWER METER USER MANUAL
1.General information
1.1.Use and storage of the manual
Carefully read this manual and adhere to the indications described prior to using the device.
This manual contains all of the safety information, the technical aspects and the operations necessary to
ensure the correct use of the device and maintain it in safe conditions.
1.2.Copyright
The copyright of this manual is the property of ABB LV Installation Materials Co. Ltd. Beijing.
This manual contains texts, designs and illustrations of a technical nature which must not be disclosed
or transmitted to third parties, even partially, without the written authorisation of ABB LV Installation
Materials Co. Ltd. Beijing.
1.3.Liability disclaimer
The information contained in this document is subject to change without notice and cannot be
considered as an obligation by ABB LV Installation Materials Co. Ltd. Beijing. ABB LV Installation Materials
Co. Ltd. Beijing is not liable for any errors that may appear in this document. ABB LV Installation Materials
Co. Ltd. Beijing is not liable under any circumstances for any direct, indirect, special, incidental or
consequential damage of any kind that may arise from using this document. ABB LV Installation Materials
Co. Ltd. Beijing is also not liable for incidental or consequential damage that may arise from using the
software or hardware mentioned in this document.
1.4.General safety warnings
Non-adherence to the following points can lead to serious injury or death.
Use the suitable personal protection devices and adhere to the current regulations governing electrical
safety.
• This device must be installed exclusively by qualified personnel who have read all of the information relative
to the installation.
• Check that the voltage supply and measurement are compatible with the range permitted by the device.
• Ensure that all current and voltage supplies are disconnected prior to carrying out any controls, visual
inspections and tests on the device.
• Always assume that all circuits are under voltage until they are completely disconnected, subjected to tests
and labelled.
• Disconnect all of the power supply prior to working on the device.
• Always use a suitable voltage detection device to check that the supply is interrupted.
• Pay attention to any dangers and carefully check the work area ensuring that no instruments or foreign
objects have been left inside the compartment in which the device is housed.
• The correct use of this device depends on a correct manipulation, installation and use.
• Failure to adhere to the basic installation information can lead to injuries as well as damage to the electric
instruments or to any other product.
• NEVER connect an external fuse in by-pass.
• Disconnect all of the input and output wires before carrying out a dielectric rigidity test or an insulation test
on an instrument in which the device is installed.
• The tests carried out at a high voltage can damage the device’s electronic components.
• The device has to be installed inside a switchboard.
• Installation of M1M shall include a switch or circuit breaker for the connection of auxiliary supply and voltage
measurement. The switch or circuit breaker must be suitably located and easily reachable and must be
marked as the disconnecting device for M1M.
• Switch off circuit breaker or switch before disconnecting from the auxiliary supply and voltage
measurement or connecting to the auxiliary supply or voltage measurement.

6M1M 30 POWER METER USER MANUAL
1.5.Cyber Security Disclaimer
M1M 30 power meter is designed to be connected and to communicate information and data via a
network interface, which should be connected to a secure network. It is your sole responsibility to
provide and continuously ensure a secure connection between the product and your network or any
other network (as the case may be) and to establish and maintain appropriate measures (such as but
not limited to the installation of firewalls, application of authentication measures, encryption of data,
installation of antivirus programs, etc.) to protect the M1M 30 power meter product, the network,
its system and interfaces against any kind of security breaches, unauthorized access, interference,
intrusion, leakage and/or theft of data or information. ABB LV Installation Materials Co. Ltd. Beijing and
its affiliates are not liable for damages and/ or losses related to such security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information.
Although ABB LV Installation Materials Co. Ltd. Beijing provides functionality testing on the products
and updates that we release, you should institute your own testing program for any product updates or
other major system updates (to include but not limited to code changes, configuration file changes, third
party software updates or patches, hardware change out, etc.) to ensure that the security measures that
you have implemented have not been compromised and system functionality in your environment is as
expected.

7
2CSG445090D1001 July2020
power meter
INSTALLATION MANUAL

QR Code foronline
User Manual.
在线二维码
用户手册。
Contact us
ABB S.p.A.
Electrification Business
Viale dell’Industria, 18
20010Vittuone (MI) Italy
https://new.abb.com/low-voltage
Warning!Installation by person
with electrotechnical expertise
only.
警告! 只能由具有电气技术专业知识
的人安装。
M1M 30
92
-0+0,8
mm
92
-0+0,8
mm
1.Packaging Content
• A M1M product attached with a fixed clips
• A Installation Manual
• A Calibration Certificate
• A pack of wiring terminals (power source,
voltage port, I/O ports and RS-485 port)
2.Installation
2.1.Assembly
© Copyright2019 ABB S.p.A . All rights
reserved. Specification subject to change
without notice.
3.Wiring Diagram
3-Phase 4-wire network with 3CTs
4.HMI
3-Phase 4-wire network with 1CT
5.First Commissioning
Tostart to use the analyzer it is mandatory
to configurethe basic setting (password,
type of network, CT ratioand V T ratio).
3-Phase 3-wire network with 3CTs
3-Phase 4-wire network with 3CTsand 3VTs
1-Phase 2-wire network with 1CT
Button Functions
1 Menu Access the menu and
navigation
2 Up Navigatein the measurements
or change a configuration value
3 Down Navigate in the measurements
or change a configuration value
4 Enter Confirm an action and
navigation
Type Description
3N3T
Three-phase, four-wireand three-transformer
3 3T Three-phase, three-wireand three-transformer
3 2T Three-phase, three-wireand two-transformer
3 1T Three-phase, three-wireand one-transformer
1N1T Single-phase,two-wire and one-transformer
Data Area
Menu
RTC
Icon
Energy LED
Default passwordis 0000. At
first use, the passwordshall be
defined. In order to disable the
password,please enter 0000.
5.1.Setting password
The passwordis composed by 4 numerical
characters.In order to select each numerical
character,it is necessary to use button ‘Up’
or ‘Down’and confirm every selection with
‘Enter’.
5.2.Type of network
Select the type of network among the
following ones
5.3.Current Transformerratio
1. Select the current transformer primary ratio
andconfirm selec tionby ‘Enter ’.
2. Select the current transformer secondary
ratioand confirm selection by ‘Enter’
5.4.Voltage Transformerratio
1. Select the current transformer primary ratio
andconfirm selec tionby ‘Enter ’;
2. Select the current transformer secondary
ratioand confirm selection by ‘Enter’.
1.包装清单
• 一台配有安装夹的M1M
• 安装说明书
• 校准证书
• 接线端子
2.设备安装
2.1.安装
功率计
安装说明书
3.接线
三相四线 3个电流互感器
三相四线 1个电流互感器
三相三线 3个电流互感器
三相四线 3个电流互感器和3个电压互感器
单相两线 1个电流互感器
4.HMI
5.初始配置
初次使用M1M需要进行初始基本配置。
按键 描述
1 菜单 访问菜单和导航
2向上 导航变更和更改配置值
3 向下 导航变更和更改配置值
4确认 确认配置和导航
数据区
菜单
RTC
图标
图标
类型 描述
3N3T 三相四线 3个互感器
3 3T 三相三线3个互感器
3 2T 三相四线2个互感器
3 1T 三相三线1个互感器
1N1T
单相两线 1个互感器
默认密码是0000。若初始密码设置为
0000，则密码功能则被禁用。
5.1.密码设置
设备密码是由四位数字组成. 通过向上键或向下
按键修改数值，使用确认键确定每一位密码.
5.2.连接类型设置
请从下列连接类型中进行选择设置，
5.3.电流互感器设置
1. 选择电流互感器初级值，再按确认。
2. 选择电流互感器次级值，再按确认。
5.4.变压器设置
1. 选择变压器初级值，再按确认;
2. 选择变压器次级值，再按确认。
1
2
1
1
2
2
123 4
M1M Calibration Certificate
This Calibration Certificate may not be reproduced, in whole or inpa rt,
without written permission of ABB
Test Conditions Test Description Accuracy
Test
Result
No. V1
[V]
V2
[V]
V3
[V]
I1
[A]
I2
[A]
I3
[A]
PF Results Limit
#1 230 230 230 6 661 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#2 230 230 230 0,9 0,9 0,9 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#3 230 230 230 0,15 0,15 0,15 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#4 230 230 230 6 660,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#5 230 230 230 0,9 0,9 0,9 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#6 230 230 230 0,15 0,15 0,15 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#7 230 230 230 1,5 1,5 1,5 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#8 230 230 230 0,2 0,2 0,2 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#9 230 230 230 1,5 1,5 1,5 0,5 ind. Verificati on–
Active energy (Import) -0,01% ±0,5% Passed
#10 230 230 230 0,2 0,2 0,2 0,5ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#11 230 230 2 30 6 660,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#12 230 230 230 0,9 0,9 0,9 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#13 230 230 230 0,15 0,15 0,15 0,5ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#14 58 58 58 6 6 6 1 Verificati on–
Active energy (Import) -0,01% ±0,5% Passed
#15 58 58 58 6 6 6 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#16 230 230 230 6 - 6 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#17 230 230 230 0,9 - 0,9 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#18 230 230 230 0,15 - 0,15 1 Verification –
Active energy (Import) -0,01% ±0,5% Passed
#19 230 230 230 6 - 6 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
#20 230 230 230 0,9 - 0,9 0,5 ind. Verificat ion–
Active energy (Import) -0,01% ±0,5% Passed
#21 230 230 230 0,15 - 0,15 0,5 ind. Verification –
Active energy (Import) -0,01% ±0,5% Passed
M1M 30 POWER METER USER MANUAL
2.Packaging contents
Packaging contents
1 Power meter M1M 30
2 Installation manual
3 Calibration certificate
4 Installation accessories (removable terminals, fixing clips)
The number and type of removable terminals in the package varies according to the different versions.
1
4
4
2
3

88 M1M 30 POWER METER USER MANUAL
3.Technical characteristics
3.1.Description of the device
M1M series can help users accurately monitor energy efficiency while meeting their cost control
requirement.
Conforming to the international electric energy metering and monitoring accuracy standards, all M1M
series products are perfectly suitable for ABB electrical systems and solutions.
3.2.Main functionalities
Real-time Measurement
TRMS Current •
TRMS Voltage •
Frequency •
Active, Reactive and Apparent Power •
Power Factor •
Operating timer, countdown timer •
Energy
Active, Reactive and Apparent Energy •
Four-quadrant (Import/Export) •
Power quality
THD (I, V) •
Individual harmonics 40th
Unbalances (I, V) •
Neutral current Calculated
Data recording and logs
Maximum demand •
RTC (Real-Time Clock) •
Alarms 15
Warnings, alarms and errors logs •
Historicals data •
3.3.Versions
Product Name I/O Communication protocol
M1M 30 I/O 2 digital inputs,
2 digital outputs Modbus RTU
M1M 30 MODBUS 2 digital outputs Modbus RTU
M1M 30 ETHERNET 2 digital outputs Modbus TCP/IP

99
96 mm
96 mm
90 mm
65,8 mm 19,2 mm
85 mm
92 -0+0,8 mm
92 -0+0,8 mm
IEC 61554
M1M 30 POWER METER USER MANUAL
3.4.Overall dimensions

1010 M1M 30 POWER METER USER MANUAL
3.5.Technical data
Auxiliary power supply
Voltage 100-230 V AC/DC ±15%
Frequency 50 - 60Hz ±5%
Power consumption 5VA max
Installation category CAT III 300V class per IEC 61010-1 edition 3
Protection fuse T1 A-277 VAC
Measurement accuracy
IEC 61557-12 IEC 61557-12 PMD/S/K55/1 (M1M 30 Modbus, M1M 30 Ethernet)
IEC 61557-12 PMD/S/K55/0.5 (M1M 30 I/O)
Active energy IEC 61557-12 Class 1 (M1M 30 Modbus, M1M 30 Ethernet)
IEC 61557-12 Class 0.5 (M1M 30 I/O)
IEC 62053-22 Class 0.5S (M1M 30 I/O)
Reactive energy IEC 61557-12 Class 2
Active power IEC 61557-12 Class 1 (M1M 30 Modbus, M1M 30 Ethernet)
IEC 61557-12 Class 0.5 (M1M 30 I/O)
Reactive power IEC 61557-12 Class 2
Apparent power IEC 61557-12 Class 2
Voltage IEC 61557-12 Class 0.5
Current IEC 61557-12 Class 0.5
Neutral Current (calculated) IEC 61557-12 Class 1
Frequency IEC 61557-12 Class 0.1
Unbalance IEC 61557-12 Class 0.5
Harmonics, THD (Current, voltage) IEC 61557-12 Class 1
Voltage Measurement inputs
Voltage Range 80-265 VAC(L-N)
Type Single-phase, three-phase (3P, 3P+N)
Rated frequency 50Hz or 60Hz
Protection fuse T1 A-277 VAC
Current measurement inputs
Current input mode Indirect insertion with CT
Rated current at secondary side of CT 1A or 5A
Range without accuracy derating 50mA-6A
I/O
Digital Output
Number of output channels 2
Voltage 5-48VDC
Current 2-100mA
Digital Input
Number of input channels 2 (M1M 30 I/O only)
Voltage 24VDC
Mechanical properties
Overall Dimensions 96 mm x 96 mm x 85 mm
IP degree of protection (IEC 60529) Front: IP51
Terminals: IP20
Max. weight 345g

1111
M1M 30 POWER METER USER MANUAL
Climatic conditions
Operating temperature -5 to 55 °C (K55 IEC61557-12)
Storage temperature -25 to 70 °C (K55 IEC61557-12)
Environment
It is prohibited to use in the environment
containing H2S, Cl2, NH3 and other harmful
gases
Communication protocol
Modbus RTU M1M 30 MODBUS, M1M 30 I/O
Communication interface RS485 with optical isolation
Baud rate 9.6, 19.2, 38.4, 57.6, 115.2 kbps
Parity number
Odd (1 stop bit), Even (1 stop bit), None (1 or 2
stop bits)
Address 1-247
Connector 3 pole terminal
Modbus TCP/IP M1M 30 ETHERNET
Protocol Modbus TCP/IP
Communication interface RJ45
Real time clock
Clock drift <0.4s/day
Keep work after power off >7 day
Standards
Power metering and monitoring devices (PMD) IEC 61557-12
EMC IEC 61326-1
Electrical safety IEC 61010-1

12
92
-0+0,8
mm
92-0+0,8 mm
IEC 61554
M1M 30 POWER METER USER MANUAL
4.Installation
4.1.Assembly
1
3
2

13
92
-0+0,8
mm
92-0+0,8 mm
IEC 61554
M1M 30 POWER METER USER MANUAL
4.2.Disassembly
2
1

14 M1M 30 POWER METER USER MANUAL
4.3.Wiring diagrams
The operations to carry out for the correct connection of the device, based on the type of electric line
available, are described in this section.
The installation and the cabling of the device must be carried out by qualified personnel.
Danger of electrocution, burning and electric arc.
Use the personal protection devices suitable to adhere to the current regulations governing electrical safety.
Prior to carrying out any connections check the sectioning of the electric supply with the voltage detection
device.
• M1M 30 ETHERNET
• M1M 30 I/O

15
M1M 30 POWER METER USER MANUAL
• M1M 30 MODBUS
Type of network
M1M 30 can be used on different type of network (please refer to chapter “7.Configuration (CONF)” for
the configuration on the device).
According to the type of network that has been chosen, the parameters visualized on the device HMI
change.
Below the wiring diagrams are shown:
• 3-phase 4-wire network with 3CTs (3N3T)
• 3-phase 3-wire network with 3CTs (3 3T)

16 M1M 30 POWER METER USER MANUAL
• 3-phase 3-wire network with 2CTs (3 2T)
• 3-phase 3-wire network with 1CT (3 1T)
• 1-phase 2-wire network with 1CT (1N1T)
• Digital outputs
• Digital inputs (M1M 30 I/O only)

17
1
3
2
M1M 30 POWER METER USER MANUAL
5.Access to device
This chapter gives a detailed introduction of the device’s HMI, including how to read data and configure
related parameters.
5.1.Display
Front panel
The front panel of M1M is shown below:
Operator panel
1 Display
2 Function buttons
3 Energy pulse LED

18
4
2
8
7
1
6
3
5
M1M 30 POWER METER USER MANUAL
Display content
Display is divided into 8 different areas, as shown in the figure below:
N Area Description
1 Title Title of the content displayed on each screen, including MENU, READ and CONF…
2 Phase
The corresponding phase of the measured value displayed, such as L1, L2, L3, L12
and L23…
3 Measurements Specific measured value
4 Magnitude/Unit
Magnitude includes E, K and M;
Unit includes V, A, W and WH…
5 Load type Inductive load and capacitive load
6 Additional info Additional info regarding the displayed page. Includes MAX, MIN, LOG...
7 Icons Indicating various types of state; and for further details, see the table below
8RTC Real-time clock
Icon Description
Notification of alarm
Unread alarm notification
Correct phase sequence
Reverse phase sequence
Notification of error
Communication signals sent
Communication signals received
Historical data available
Configure parameters
Device locked, and parameters non-configurable
Device unlocked, and parameters configurable
Notification of warning

19
1
23
4
M1M 30 POWER METER USER MANUAL
5.2.Buttons
Each M1M is provided with 4 pushbuttons as per below picture::
Functions of each button might change according to the displayed page on the meter. See below for a
complete description:
# Button Functions
1 Menu Go to the main menu; go back; or return to the default screen
2 Up
Page up and enter numerical value in cyclic and ascending way and decimal point;
and when pressed continuously, page is up continuously or numerical value ascends
automatically
3 Down
Page down and move to higher-order numerical value and confirm the decimal
point; and when pressed continuously, page is down or numerical value moves to
higher order continuously until zero clearing
4Enter Go to the next menu, confirm the numerical value or option input, and read the
average of the parameter measurements
Inside the Data reading menu (READ), a combination of pushbuttons might have a specific function, only
available on some pages. See below for a complete description:
Menu Screen Combined Buttons Function
READ/REAL/
VLN
VLL
I
IN
P
Q
S
PQST
Enter Read the average
Up + Enter Read the maximum value
Down + Enter Read the minimum value
Up + Down + Enter Reset maximum and minimum
value
READ/LOG/ All
Up + Enter Read the last set of stored data
Down + Enter Read the next set of stored
data

20
x3
x9
x1
1
2
M1M 30 POWER METER USER MANUAL
5.3.Data entry
Some of the pages require the entry of numerical characters (0-9) in the Configuration mode. In these
cases the display will show an active field identified by a flashing number.
Data entry procedure
The data entry procedure is as follows:
1. Press “Up” to increase the numerical characters from 0 to 9, until the required character is obtained.
• How to: Go back to a previous number
If during the data entry the desired number is exceeded by mistake, it is needed to increase the displayed
number until data entry starts again from 0.
• Add a second digit
2. Press “Down” to move the cursor in order to add a second digit to the number;