ABB 83325/2-500 User manual

VER: 1.3 ││28.04.2017
ABB-Welcome
Pos:2 /D inA 4 -A nl eitun gen Online /Inh alt/KNX /DoorEntry /83325- 2/Titelbla tt - 833 25- 2-A B B @ 19\ mod_132 316 792551 2_15.doc x@ 1 109 57@ @ 1
DE EN FR NL RU PL
NO SW FI IT ES CN
83325/2-5..
Videoverteiler Außen
Outdoor video distributor
Distributeur vidéo extérieur
Videoverdeler buiten
Внешний
видеораспределитель
Rozdzielacz wideo
Videofordeler utendørs
Videofördelare, yttre
Videojakaja, ulko
Splitter video esterno
Distribuidor de video
室外视频分配器
===E nde der Li ste für Tex tmarke C over == =

ABB-Welcome
|
0073
-
1
-
7520
—
2
—
Pos:4 /B usch-Ja ege r(N eus t ruktur)/ Modul-St ruktur/Onl i ne-Doku mentati on /Inhaltsve rzeich nis (--> Fü r alle D oku mente <-- )/Inhaltsverz eic hnis@ 19\ mod_13 206490 44386_1 5.d ocx@ 109653 @ @ 1
1Safety................................................................................................................................................................3
2Intended use......................................................................................................................................................3
3Environment......................................................................................................................................................3
3.1 ABB devices......................................................................................................................................3
4User Manual......................................................................................................................................................3
5Technical data ...................................................................................................................................................4
6Mounting/Installation..........................................................................................................................................5
6.1 Requirements for the electrician.........................................................................................................5
6.2 General installation instructions..........................................................................................................5
6.3 Mounting ...........................................................................................................................................6
6.4 Connection........................................................................................................................................6
===E nde der Lis te für Tex tmarke TOC == =

ABB-Welcome
Safety
|
0073
-
1
-
7520
—
3
—
Pos:6 /B usch-Ja ege r(N eus t ruktur)/ Modul-St ruktur/Onl i ne-Doku mentati on /Überschri ften (- -> Für alle D okument e< --)/ 1. Ebene/S -T /S icher heit@ 18\mod _13026 127 91790_ 15.docx @ 103357 @1 @ 1
1Safety
Pos:7 /B usch-Ja ege r(N eus t ruktur)/ Modul-St ruktur/Onl i ne-Doku mentati on /Sicherhei t (--> Für alle Dok umente <--)/Warn hinweise /Sicher heit - 23 0 V @ 18\m od_130 260681 675 0_15.docx @ 1 033 08@ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect contact with live
components.
This can result in electric shock, burns or even death.
■Disconnect the mains power supply prior to installation and/or disassembly!
■Permit work on the 110-240 V supply system to be performed only by specialist staff!
Pos:8 /B usch-Ja ege r(N eus t ruktur)/ Modul-St ruktur/Onl i ne-Doku mentati on /Überschri ften (- -> Für alle D okument e< --)/ 1. Ebene/A -F /B estimmun gsgemä ßer Gebrau ch @ 18\ mod_13 0276332 131 6_15.do cx @ 103483 @ 1 @ 1
2Intended use
Pos:9 /D inA 4 -A nl eitun gen Online /Inh alt/KNX /DoorEntry /83325- 2/Besti mmungs gemaesse r Gebr auch -8 332 5-2-500 @ 19\m od_ 132316 7484272 _15.docx @1 109 48 @ @ 1
The 83325/2-500 video distributor is an integral part of the ABB-Welcome door entry system and operates
exclusively with components from this system. The device must only be installed on mounting rails according to
DIN EN 500022.
Pos:10 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Übersc h riften ( -->Fü r alle Dokumente < -- )/1. Ebene /U - Z/U mwelt @ 18\mod _13 026141 58967_1 5.doc x @ 103383 @ 1 @ 1
3Environment
Pos:11 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Umw elt ( -->F ür all e Doku mente <--)/Hinweis e/Hinw ei s- U mwel t - Hinw eis E lektr ogeräte @1 8\mo d_1302 763973 434 _15.docx @ 10 3500 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household waste.
– The device contains valuable raw materials that can be recycled. Therefore, dispose of the
device at the appropriate collecting facility.
Pos:12 /D i nA4 -A nl eitungen Onlin e/Uebersc hriften/2 ./A B BGera ete @ 19 \mod_1 323162 843 832_ 15. docx@ 110875 @ 2 @ 1
3.1 ABB devices
Pos:13 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Umw elt ( -->F ür all e Doku mente <--)/Hinweis e/Hinw ei s- U mwel t - AB B Elektro geräte @ 19\mo d_1 3231627 45839_ 15.docx @ 110867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always
dispose of the packaging material and electric devices and their components via authorized collecting facilities
and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos:14 /D i nA4 -A nl eitungen Onlin e/Uebersc hriften/1 ./A nwender handbuc h @ 19\ mod_13 0934722 759 3_15.doc x @ 1 07473 @ 1@ 1
4User manual
Pos:15 /D i nA4 -A nl eitungen Onlin e/In halt/KNX /DoorE nt ry/Syste mhandb uch/Anw enderh and buch - A BB @ 19 \mod_1 323 163157 997_15. docx @ 11 0883 @ @ 1
Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at
www.Busch-Jaeger.com.
Pos:16 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-D oku mentatio n/Steuer modul e - Onlin e-Dokume ntati on( -- > F ür alle D okume nte <- -)/ +++ +++++++ ++S ei tenumb ruch + +++ ++ ++++++ @ 9\m od_126 8898668 093 _0.doc x @ 521 49 @ @ 1

ABB-Welcome
Technical data
|
0073
-
1
-
7520
—
4
—
Pos:17 /D i nA4 -A nl eitungen Onlin e/Uebersc hrift en/1./T echnisc he Daten @ 18\mo d_1302 615863 001 _15.docx @ 10 341 6@ 1 @ 1
5Technical data
Pos:18 /D i nA4 -A nl eitungen Onlin e/In halt/KNX /DoorE nt ry/83325 -2/Tec hnisch e Dat en- 83 325-2 @ 18\mod _13 0321816 5047_1 5.docx @ 1 03876 @ @ 1
Designation Value
Operating temperature (EN
50486) -5 ℃- +45 ℃
Storage temperature -20 °C - +70 °C
Protection IP 20
Single-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²
Fine-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²
Volume Max. 80 dB
Bus voltage 28±2 V
Size 2 TE
Pos:19 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-D oku mentatio n/Steuer modul e - Onlin e-Dokume ntati on( -- > F ür alle D okume nte <- -)/ +++ +++++++ ++S ei tenumb ruch + +++ ++ ++++++ @ 9\m od_126 8898668 093 _0.doc x @ 521 49 @ @ 1

ABB-Welcome
Mounting/installation
|
0073
-
1
-
7520
—
5
—
Pos:20 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Übersc h riften ( -->Fü r alle Dokumente < -- )/1. Ebene /M - O/ Montage / Installati o n @ 18\ mod_13 0261396 611 1_15.do cx@ 1 03373 @ 1 @ 1
6Mounting/installation
Pos:21 /B us ch-Jaeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Siche rheit (- -> Fü ralle D okument e <--) /War nhinweis e/Siche rheit - N ie derspan nungs- und 230V -Leitung en @ 18\ mod_13 026 178214 91_15.d ocx@ 103 465 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect contact with live
components.
This can result in electric shock, burns or even death.
■Disconnect the mains power supply prior to installation and/or disassembly!
■Permit work on the 110-240 V supply system to be performed only by specialist staff!
Pos:22 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Siche rheit (- -> Fü ralle D okument e <--) /War nhinweis e/Siche rheit - Fachkenn tnisse @ 18 \mod_1 302 774384 017_15. docx@ 10 3564 @ 2 @ 1
6.1 Requirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
• Incorrect installation endangers your life and that of the user of the electrical system.
• Incorrect installation can cause serious damage to property, such as a fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
• Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power.
2. Secure against being re-connected.
3. Ensure there is no voltage.
4. Connect to earth.
5. Cover or barricade adjacent live parts.
• Use suitable personal protective clothing.
• Use only suitable tools and measuring devices.
• Check the type supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos:23 /D i nA4 -A nl eitungen Onlin e/In halt/KNX /DoorE nt ry/Monta ge/Mont agehinw eis e- A llg emein @ 1 9\mod_ 131056 367047 8_15.docx @ 1077 43 @ 2 @ 1
6.2 General installation instructions
• Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
• Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
• Do not install the wires of the system bus together with 230 V wires.
• Do not use common cables for the connecting wires of the door openers and wires of the system bus.
• Avoid bridges between different cable types.
• Use only two wires for the system bus in a four-core or multi-core cable.
• When looping, never install the incoming and outgoing bus inside the same cable.
• Never install the internal and external bus inside the same cable.
Pos:24 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-D oku mentatio n/Steuer modul e - Onlin e-Dokume ntati on( -- > F ür alle D okume nte <- -)/ +++ +++++++ ++S ei tenumb ruch + +++ ++ ++++++ @ 9\m od_126 8898668 093 _0.doc x @ 521 49 @ @ 1

ABB-Welcome
Mounting/installation
|
0073
-
1
-
7520
—
6
—
Pos:25 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-Dok u mentatio n/Übersc h riften ( -->Fü r alle Dokumente < -- )/2. Ebene /M - O/ Montage @ 18\m od_1 302615 960458 _15.docx @10 342 4 @ 2 @ 1
6.3 Mounting
Pos:26 /D i nA4 -A nl eitungen Onlin e/In halt - M ontage/ Montage -H utschie nen nac h DIN EN 50002 2 @ 18\mod_ 130321 816475 0_15.doc x @ 1 038 68@ @ 1
The device 83325/2-5.. must only be installed on mounting rails according to DIN EN 500022.
Pos:27 /D i nA4 -A nl eitungen Onlin e/Uebersc hriften/2 ./A nschl uss @ 18\ mod_130 261 757335 1_15.doc x@ 1 034 49@ 2@ 1
6.4 Connection
Pos:28 /D i nA4 -A nl eitungen Onlin e/In halt/KNX /DoorE nt ry/83325 -2/Ans chluss - 8 3325-2 @ 18\mo d_1 303218 164125_ 15.doc x @ 103844 @ @ 1
Fig. 1:
No. Function
1Systemzentrale/Außenbus
System controller/outdoor bus
Centrale système/bus extérieur
Systeemcentrale/buitenbus
Системный контроллер/внешняя шина
Centrala systemu/magistrala zewnętrzna
Systemsentral/utendørs-bus
Systemcentral/ytterbuss
Järjestelmäkeskus/ulkoväylä
Centralina/bus esterno
Central del sistema/Bus exterior
系统控制器/室外总线
2 / 3 Außenstationen/Außenbus
Outdoor stations/outdoor bus
Interphones extérieurs/bus extérieur

ABB-Welcome
Mounting/installation
|
0073
-
1
-
7520
—
7
—
Buitenposten/buitenbus
Внешние переговорные пункты/внешняя шина
Stacje zewnętrzne/magistrala zewnętrzna
Utendørsstasjoner/utendørs-bus
Ytterstationer/ytterbuss
Ulkoasemat/ulkoväylä
Stazioni esterne/bus esterno
Estaciones exteriores/Bus exterior
门口机/室外总线
Pos:29 /B usch-J aeg er (Neus truktur )/M odul-S truktur/O nline-D oku mentatio n/Steuer modul e - Onlin e-Dokume ntati on( -- > F ür alle D okume nte <- -)/ +++ +++++++ ++S ei tenumb ruch + +++ ++ ++++++ @ 9\m od_126 8898668 093 _0.doc x @ 521 49 @ @ 1
===E nde der Lis te für Tex tmarke C ontent ===

ABB-Welcome
Notice
===E nde der Liste für Tex tmarke Ba ck cover = ==
We reserve the right to at all times make technical changes as well as changes in the contents of this document without prior
notice.
The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible
errors or incompleteness in this document.
We reserve all rights to this document and the topics and illustrations contained therein. The document and its contents, or
extracts thereof, must not be reproduced, transmitted or reused by third parties without prior written consent by ABB.
===E nde der Liste für Tex tmarke Ba ck cover = ==