ABB MSA-F-1.1.1-***-WL series Product manual

2CKA001473B9194 │ 14.06.2017
Technical Reference Manual
ABB-free@home®
Movement detector/switch
actuator, 1gang, wireless
MSA-F-1.1.1-...-WL

Table of contents
Technical Reference Manual 2CKA001473B9194 │2
Table of conten ts
1Information on the manual .......................................................................................................................................... 3
2Safety.......................................................................................................................................................................... 4
2.1Information and symbols used........................................................................................................................ 4
2.2Intended use................................................................................................................................................... 5
2.3Improper use .................................................................................................................................................. 5
2.4Target group / Qualifications of personnel...................................................................................................... 5
2.5Safety instructions .......................................................................................................................................... 6
2.6Environment ................................................................................................................................................... 7
3Setup and function...................................................................................................................................................... 8
3.1Scope of supply.............................................................................................................................................. 9
3.2Overview of types........................................................................................................................................... 9
3.3Functions........................................................................................................................................................ 9
3.4Device overview ........................................................................................................................................... 10
4Technical data........................................................................................................................................................... 11
4.1Types of load................................................................................................................................................ 11
4.2Dimensional drawings .................................................................................................................................. 12
5Connection and installation....................................................................................................................................... 13
5.1Planning instructions .................................................................................................................................... 13
5.2Safety instructions ........................................................................................................................................ 13
5.3Detection range ............................................................................................................................................ 14
5.4Circuit diagrams............................................................................................................................................ 14
5.5Installation .................................................................................................................................................... 15
6Commissioning ......................................................................................................................................................... 17
6.1Coupling of wireless devices with the System Access Point ........................................................................ 18
6.2Allocation of devices and definition of channels ........................................................................................... 20
6.3Setting options per channel.......................................................................................................................... 26
6.4Links ............................................................................................................................................................. 28
7Update ...................................................................................................................................................................... 31
8Operation .................................................................................................................................................................. 31
9Maintenance ............................................................................................................................................................. 31
9.1Cleaning ....................................................................................................................................................... 31
9.2Diagnosis of faults ........................................................................................................................................ 32
10Notes......................................................................................................................................................................... 33
11Index ......................................................................................................................................................................... 34

Information on the manual
Technical Reference Manual 2CKA001473B9194 │3
1 Information on the manual
Please read this manual carefully and observe the information it contains. This will assist you in
preventing injuries and damage to property, and ensure both reliable operation and a long
service life for the device.
Please keep this manual in a safe place.
If you pass the device on, also pass on this manual along with it.
ABB accepts no liability for any failure to observe the instructions in this manual.
If you require additional information or have questions about the device, please contact ABB or
visit our Internet site at:
www.abb.com/freeathome

Safety
Technical Reference Manual 2CKA001473B9194 │4
2 Safety
The device has been constructed according to the latest valid regulations governing technology
and is operationally reliable. It has been tested and left the factory in a technically safe and
reliable state.
However, residual hazards remain. Read and adhere to the safety instructions to prevent
hazards of this kind.
ABB accepts no liability for any failure to observe the safety instructions.
2.1 Information and symbols used
The following Instructions point to particular hazards involved in the use of the device or provide
practical instructions:
Danger
Risk of death / serious damage to health
– The respective warning symbol in connection with the signal word "Danger"
indicates an imminently threatening danger which leads to death or serious
(irreversible) injuries.
Warning
Serious damage to health
– The respective warning symbol in connection with the signal word "Warning"
indicates a threatening danger which can lead to death or serious
(irreversible) injuries.
Caution
Damage to health
– The respective warning symbol in connection with the signal word "Caution"
indicates a danger which can lead to minor (reversible) injuries.
Attention
Damage to property
– This symbol in connection with the signal word "Attention" indicates a
situation which could cause damage to the product itself or to objects in its
surroundings.
NOTE
This symbol in connection with the word "Note" indicates useful tips and
recommendations for the efficient handling of the product.
This symbol alerts to electric voltage.

Safety
Technical Reference Manual 2CKA001473B9194 │5
2.2 Intended use
This device is a sensor/actuator unit for decentralized flush-mounted installation.
The device is intended for the following:
■ Operation according to the listed technical data
■ Installation in dry interior rooms and suitable flush-mounted boxes
■ Use with the connecting options available on the device
The intended use also includes adherence to all specifications in this manual.
2.3 Improper use
Each use not listed in Chapter 2.2 “Intended use“ on page 5 is deemed improper use and can
lead to personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the
device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
■ Unauthorized structural changes
■ Repairs
■ Outdoor use
■ The use in bathroom areas
■ Substitute for an alarm system.
2.4 Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts

Safety
Technical Reference Manual 2CKA001473B9194 │6
2.5 Safety instructions
Danger - Electric voltage!
Electric voltage! Risk of death and fire due to electric voltage of 100 … 240 V.
Dangerous currents flow through the body when coming into direct or indirect
contact with live components. This can result in electric shock, burns or even
death.
■ Work on the 100 … 240 V supply system may only be performed by
authorised and qualified electricians.
■ Disconnect the mains power supply before installation or dismantling.
■ Never use the device with damaged connecting cables.
■ Do not open covers firmly bolted to the housing of the device.
■ Use the device only in a technically faultless state.
■ Do not make changes to or perform repairs on the device, on its components
or its accessories.
Caution! - Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
■ Protect the device against humidity, dirt and damage during transport,
storage and operation.

Safety
Technical Reference Manual 2CKA001473B9194 │7
2.6 Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic
waste.
– The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate collecting depot.
All packaging materials and devices bear the markings and test seals for proper disposal.
Always dispose of the packaging material and electric devices and their components via the
authorized collecting depots and disposal companies.
The products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006).

Setup and function
Technical Reference Manual 2CKA001473B9194 │8
3 Setup and function
1
3
2
Fig. 1: Product overview
[1] Flush-mounted insert
[2] Cover frame (not included in scope of delivery)
[3] Cover
This device is a movement detector/switch actuator unit for decentralized flush-mounted
installation. The movement detector and the switch actuator form a single unit. The devices
respond to moving body heat and switch on the lights. They are appropriately pre-programmed
and switch directly after being installed. However, this pre-configuration can be adjusted as
required.
The devices do not serve as a substitute for an alarm system.
Sensor and actuator are combined in a flush-mounted insert [1].
After connecting the load, it can be switched directly.

Setup and function
Technical Reference Manual 2CKA001473B9194 │9
3.1 Scope of supply
The scope of supply only contains the flush-mounted insert [1] and the cover [3].
It must still be completed with a suitable cover frame [2].
Note
Additional information about the switch ranges is available in the electronic
catalogue (www.busch-jaeger-catalogue.com).
3.2 Overview of types
Article no. Product name Sensor
channels Actuator channels Switching load
MSA-F-1.1.1-...-
WL
Movement
detector/switch
actuator, 1gang,
wireless
1 1 1 x 2300 W
Table 1: Overview of types
3.3 Functions
The following table provides an overview of the possible functions and applications of the
device:
Icon of the user
interface Information
Name: Movement detectors
Type: Sensor
Made available by: Movement detector/switch actuator
Function: Sensor for movement- and brightness- dependent control of free@home
functions
Name: Switch actuator
Type: Actuator
Made available by: Movement detector/switch actuator
Function: Switches connected loads
Table 2: Overview of functions

Setup and function
Technical Reference Manual 2CKA001473B9194 │10
3.4 Device overview
4
132
Fig. 2: Overview of devices Movement detector/switch actuator, 1gang, wireless
[1] Phase sensing L
[2] Mark TOP
[3] Terminal strip for cover
[4] Bottom terminal block
1
Fig. 3: Cover/sensor
[1] Cover/sensor for Movement detector/switch actuator, 1gang, wireless

Technical data
Technical Reference Manual 2CKA001473B9194 │11
4 Technical data
Designation Value
Operating voltage 230 V AC, 50/60 Hz
Connection
L, N (option), inputs and outputs non-
floating
Screw-type terminal:
2 x 2.5 mm² rigid;
2 x 1.5 mm² flexible
Claw With protective cover and reset
(removable)
Transmission protocol free@home wireless
Transmission frequency 2.400 - 2.483 GHz
Maximum transmission power
WL (wireless) < 15 dBm
Power consumption < 1 W
Maximum load 10 Ax
Protection IP20
Ambient temperature -5°C to +45°C
Storage temperature -20°C to +70°C
Opening angle 180°
Mounting height 1.1 m - 1.3 m
Table 3: Technical data
4.1 Types of load
Movement detector/switch actuator, 1gang
2300 W
2300 W
2300 VA
CFL 2300 W
LEDi Typically 100 W
Table 4: Types of load

Technical data
Technical Reference Manual 2CKA001473B9194 │12
4.2 Dimensional drawings
Note
All dimensions are specified in mm. All device types listed in this manual
have the same dimensions.
71
7
1
32
5
3
Fig. 4: Dimensions of all described device types (all dimensions in mm)

Connection and installation
Technical Reference Manual 2CKA001473B9194 │13
5 Connection and installation
5.1 Planning instructions
NOTE
Planning and application instructions for the system are available in system
manual for ABB-free@home®. This can be downloaded via
www.abb.com/freeathome.
NOTE
Transmitter and receiver communicate via radio control. The transmission range
depends on the structural conditions. Walls and ceilings, especially steel
reinforcements or metal claddings, reduce the transmission range. The distance
of components to each other and to other transmitters that also emit high-
frequency signals (e.g. computers, audio and video systems) should be at least
1 m.
5.2 Safety instructions
Danger - Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
■ Incorrect installation endangers your life and that of the users of the
electrical system.
■ Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
■ Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
■ Use suitable personal protective clothing.
■ Use only suitable tools and measuring devices.
■ Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective earthing, necessary additional measures, etc.).
■ Observe the correct polarity.

Connection and installation
Technical Reference Manual 2CKA001473B9194 │14
5.3 Detection range
Fig. 5: Detection range
[1] Mounting heights / detection levels;
[2] Detection range (0°C – 36°C);
[3] Horizontal reduction of the detection range by masking
5.4 Circuit diagrams
L
N
10
A
LN1
Fig. 6: Electrical connection

Connection and installation
Technical Reference Manual 2CKA001473B9194 │15
5.5 Installation
Note
The devices have been prepared for installing in flush-mounted boxes in
connection with the corresponding mounting plate. The device insert has already
been inserted in the mounting plate.
To install the device, perform the following steps:
Note
The sensor must be pulled
off the flush-mounted insert
before mounting!
1. Turn the device into the correct
installation position.
– The mark "TOP" [1] must be
aligned toward the top.
Note
Observe the correct
polarity!
2. Connect the 230 V power cord to the
bottom terminal block [2], see
chapter “Circuit diagrams“ on page
14
3. Insert the device into the flush-
mounted box and screw it on.
Fig. 7: Installation
4. Attach the cover frame.
Fig. 8: Connection of bus


Connection and installation
Technical Reference Manual 2CKA001473B9194 │16
5. Attach the sensor onto the device
insert.
Observe the correct position of the
terminal strip [1].
Fig. 9: Connection of bus

Commissioning
Technical Reference Manual 2CKA001473B9194 │17
6 Commissioning
Commissioning of the device is always carried out via the Web-based surface of the System
Access Point. It is assumed that the basic commissioning steps of the overall system have
already been carried out. Knowledge about the Web-based commissioning software of the
System Access Point is assumed.
The System Access Point establishes the connection between the free@home participants and
the smartphone, tablet or PC. The System Access Point is used to identify and program the
participants during commissioning.
When energized, a device that has not been programmed is in programming mode for 30
minutes and can be logged into the system. Programmed devices share information about their
type and supported functions with the System Access Point.
During initial commissioning all devices are given a universal name (Sensor/switch actuator
1/1gang, etc.). The installer must change this name within the commissioning process to a
name practical and specific for the system (in case of an actuator, e.g. to "Living room ceiling
light").
The devices must be parameterised for the use of additional functions.
NOTE
General information about commissioning and parameterization is available in
the technical reference manual and the online Help of the System Access Point.

Commissioning
Technical Reference Manual 2CKA001473B9194 │18
6.1 Coupling of wireless devices with the System Access Point
free@home wireless devices must first be coupled with the System Access Point before they
can be used in a project. The devices exchange a security key during the coupling process.
Communication between devices is carried out encrypted after coupling and they are firmly
connected with the System Access Point. Coupled devices cannot be connected with a different
System Access Point. They must first be reset to the factory settings.
Carry out the following steps to couple one or several devices with the system:
1. Install the free@home wireless device(s).
2. Use your smartphone, tablet or PC to call up the user interface of the System Access Point
that is ready for use.
3. Switch on the mains power supply of the free@home wireless devices.
The devices are now in programming mode for 30 minutes.
Fig 10: Coupling wireless devices with the System Access Point
4. In the user interface of the System Access Point select "System settings" > "free@home-
Wireless settings" > "Search".
The System Access Point consecutively scans all free@home wireless devices. Devices
that are in programming mode are integrated automatically into the system. The scanning
process ends 10 minutes after the last device has been integrated.
Integrated devices are listed in the "Device list" of the user interface.
5. Use the serial numbers to check whether all installed devices have been found.
If a device has not been found, reset it to the factory settings and start a new scanning
process.
Possible reasons for not finding devices:
■ The device is not in programming mode.
■ The 30-minute programming time has expired.
■ The device has already been coupled with a different system.

Commissioning
Technical Reference Manual 2CKA001473B9194 │19
6.1.1.1 Resetting the wireless device to the factory settings
1. De-energize the free@home wireless device.
2. Keep the button at the bottom left pressed.
3. Re-energize the device.
The LED flashes slowly for 10 seconds, then fast for 5 seconds and then goes out.
The factory settings are restored and the device can now be programmed again.
NOTE
Devices which are already in factory settings are not reset again. The LED
remains out in step 3.

Commissioning
Technical Reference Manual 2CKA001473B9194 │20
6.2 Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a practical name.
The allocation is made via the allocation function of the Web-based user
interface of the System Access Point.