ABC Design Condor 6S User manual

Condor 6 S
- 6-wheeled pram with reversible seat unit
- including soft carry cot
- handle height adjustable
- suitable from 6 months - 3 years (max. 15 kg)
nwith carry cot suitable from date of birth
- 4-times adjustable backrest
- corresponding to EN 1888 : 2005
- This stroller is no sport stroller
Attention:
Attention:Attention:
Attention:
This product is not usable for running or
This product is not usable for running orThis product is not usable for running or
This product is not usable for running or
skating
skatingskating
skating

Dear Customer,
Congratulations on the purchase of your ABC-Design Stroller. We are pleased that you have chosen one of our products and hope that you will be
completely satisfied with the service you receive from the product. We advise you to read the Instruction Leaflet carefully before use of the pram and
then to keep it in a safe place. If you fail to do this the safety of your child can be jeopardised. Kindly pay attention t o the washing and care
instruct ions so that y ou enjoy long and trouble free use of your new purchase.
Your ABC-Design Team
Hints for care and use
Hints for care and useHints for care and use
Hints for care and use
1. The manufacture of materials used in the fabrication of this product meet the standards required by the AZ O, EN71-2 und EN71-3. for clothing
claimed light originality values. However, we advise you not to expose the product to the sun for a long time. Attrition and fading of colours during
heavy solar radiation do not justify a damage claim. The f abric case of your stroller is washable. You can wash the case by hand or machine cold
wash.
2. Each product frame is manufactured according to EN 1888: 2005 standards. To maintain the safety of your product, the moving components
must be lubricated regularly and if required rerivetted.
Look out: Use only silicon-oil or silicon-spray for oiling.
3. Regular care and maintenance contribute to the safety and longevity of your product. Environmental influences such as salty air, road strewn salt
or acid rain as well as outdoor storage contribute towards corrosion. Therefore always store your pram indoors.
4. We recommend regular maintenance of all varnished components. Should the frame and varnished components become soiled use a damp
cloth moistend with water diluted mild detergent to wipe away the dirt.
5. Damaged air tubes are no reason for reclamation. Spare tubes can be bought in all retail shops.
By adhering to the aforementioned hints you will enjoy satisfactory use of your ABC-Design product for a long time.
page 2

1. Unfolding the stroller
1. Unfolding the stroller1. Unfolding the stroller
1. Unfolding the stroller
Pull the handle of the pram (1) upwards until the frame is
locked (2).
WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before
using.
2. Wheel installation
2. Wheel installation2. Wheel installation
2. Wheel installation
Put the wheels into the fixation until it is locked properly.
For removing the wheels push down the button located on the
axle as shown on the right picture. Now you can easily remove
the wheel from the axle.
Push the wheel block into the frame until it clicks.
Please pay attention that the breaking lever shows to the front
side.
To remove the wheel block, please push the lever
at the wheel block down and pull away the wheel block
from the frame.
page 3

3. Fixation of the front wheel
3. Fixation of the front wheel3. Fixation of the front wheel
3. Fixation of the front wheel-
--
-block
blockblock
block
To fix the front wheels, push the fixation-lever up.
To release the front wheels, push the fixation lever down.
4
44
4.
..
. Fixing and removing of the break
Fixing and removing of the breakFixing and removing of the break
Fixing and removing of the break
For fixing the breaks you have to push down the lever.
For removing the breaks you have to lift the lever.
5
55
5. Fixation seat unit
. Fixation seat unit. Fixation seat unit
. Fixation seat unit
Please fix the seat unit onto the frame as shown on the
pictures.
Please make sure that the seat unit is correctly locked onto the
frame.
page 4

6
66
6. Fixing and removing of the bumper
. Fixing and removing of the bumper. Fixing and removing of the bumper
. Fixing and removing of the bumper
For fixing the bumperbar please take it into both plastic
fixations on the left and right side as shown on the stroller.
For removing the bumper from the stroller turn both clips to
the inner side and pull the bumper to the front.
7
77
7. Adjustment of the leg support
. Adjustment of the leg support. Adjustment of the leg support
. Adjustment of the leg support
For adjusting the leg support push both buttons on both sides.
Fix the legrest in releasing both buttons.
page 5

8
88
8. Belt locking
. Belt locking. Belt locking
. Belt locking
For locking the belt put both plastic parts (1) together until it
locks.
9
99
9. Belt opening
. Belt opening. Belt opening
. Belt opening
For belt opening, put both plastic parts together (1) and then
pull it apart (2).
W
WW
WARNING
ARNINGARNING
ARNING:
::
: Please use the pelvic belt together with the crotch
belt
10
1010
10.
..
. Seat
SeatSeat
Seat unit
unitunit
unit adjustment
adjustmentadjustment
adjustment
For adjusting the seat unit, pull the lever on the rear side to the
top and adjust it.
When you have reached the requested position lot off the lever
and it locks automatically in the position you want.
page 6

Carry Cot
Carry CotCarry Cot
Carry Cot
1
11
11
11
1. Unfold the carry
. Unfold the carry. Unfold the carry
. Unfold the carry-
--
-cot
cotcot
cot
Lift the sides of the carry-cot.
Fix the sides firmly in place by pushing both steel braces into
their respective pockets.
Make certain that the braces are both properly locked in place.
1
11
12
22
2. Assembling of the
. Assembling of the. Assembling of the
. Assembling of the adaptor
adaptoradaptor
adaptor
Put the adaptor onto the carry cot like shown on the picture.
1
11
13
33
3. Fitting the mattress
. Fitting the mattress. Fitting the mattress
. Fitting the mattress
Place the mattress in the cover.
Press the mattress right down onto the floor of the carry-cot.
page 7

1
11
14
44
4. Adjust of the carrying handle
. Adjust of the carrying handle. Adjust of the carrying handle
. Adjust of the carrying handle
To adjust the carrying handle, you must press the buttons on
the two sides as shown on the photo.
Now you can adjust the carrying handle.
1
11
15
55
5. Fitting the leg
. Fitting the leg. Fitting the leg
. Fitting the leg-
--
-cover
covercover
cover
Feed the closed end of the leg-cover over the bottom
end of the carry-cot
Pull the leg-cover towards the head end of the carry-cot.
Fasten the ends of the leg blanket to the outside of the cover
with the velcro provided for it.
page 8

1
11
16
66
6. Fixation of the carry cot o
. Fixation of the carry cot o. Fixation of the carry cot o
. Fixation of the carry cot on the stroller
n the strollern the stroller
n the stroller
Put the carry cot on the stroller frame until it is fixed completely
on the frame.
For removing the carry cot from the frame pull the lever
upwards, and move the cot slightly from the frame until it is
removed completely.
Attention
AttentionAttention
Attention: Check carefully that the carry cot is fixed on the
frame properly.
1
11
17
77
7. Adjustment of the handlebar
. Adjustment of the handlebar. Adjustment of the handlebar
. Adjustment of the handlebar
To adjust the handle in height you have to push the button at
the top as shown on the photo. Now you can fix the handlebar
in the requested position.
page 9

1
11
18
88
8. Folding the stroller
. Folding the stroller. Folding the stroller
. Folding the stroller
For folding the stroller push the button as shown on the
picture.
Push the handle downwards.
Now you have to turn the black button (1) to the left and keep
on pushing the black button (2)
Now you can easily fold the stroller.
Remark: To build up the stroller, use the procedure as
mentioned in point no. 1.
WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before
using.
page 10

- Please read this instruction carefully before using the stroller. If you don’t pay attention to these
instructions, the safety of your baby can be in danger.
- This stroller is suitable for babies from the age of 6 month (by using a carry cot from date of
birth) till the age of 3 years and a weight up to 15 kg.
- WARNING:
WARNING:WARNING:
WARNING: Never leave you child unsupervised in the stroller!
- WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before using.
- WARNING
WARNINGWARNING
WARNING: Always use the safety belt when your child is in the stroller.
- The mesh basket is suitable for a maximal weight of 2 kg.
- This stroller is suitable for one baby.
- The brakes have to be fixed, while taking the child in or out.
- WARNING:
WARNING:WARNING:
WARNING: Please use the pelvic belt together with the crotch belt
- WARNING:
WARNING:WARNING:
WARNING: If you carry the stroller up- or downstairs always take your child out of the stroller.
- WARNING:
WARNING:WARNING:
WARNING: When using the carry cot please make sure that the carry cot is fixed in the right way.
- From time please check loosen parts regularly and lock it again.
Maximum air wheel pressure from 1, 5 bars to maximum 1, 8 bar.
No reason for reclamation is also air escaping of the wheel.
WARNING:
WARNING:WARNING:
WARNING: If you place heavy weight at the handle, the stability of the stroller is in danger
WARNING:
WARNING:WARNING:
WARNING: Keep away from fire
WARNING:
WARNING:WARNING:
WARNING: This stroller is no sport vehicle and may not used for jogging or inline-skating.
- Do not use a Kiddyboard, the stroller is not approved for use of a Kiddyboard.

Tips in case of reclamation
Tips in case of reclamationTips in case of reclamation
Tips in case of reclamation
- Normal problems regarding to years of wear and damages through heavy uses is no reason for
reclamation.
- Damages which are caused by wrong using of this product are no reason for reclamation.
- Damages through wrong installations are no reason for reclamation.
- Flat air tubes caused through long time standing periods are no reason for reclamation.
- Flat air tubes caused by nails, glass fragments, etc. are no reason for reclamation.
- Damages through wrong using of the stroller are no reason for reclamation.
- Parts of rust caused by missing servicing are no reason for reclamation.
- Scratches are normal damages and are no reasons for reclamation.
- Damp textile parts, which can’t be dried or mouldy parts, are no reason for reclamation.
Through sun intensity, sweat, cleansing agent, rub-downs or often washings, the fabric colour can
fade out. and this is also no reason for a reclamation.
- Used wheels are normal damages and are no reason for reclamation. This is also no reason for a
reclamation.
- Used wheels are normal damages and are no reason for reclamation.
ABC Design GmbH
Dr. Rudolf-Eberle-Str. 29
D-79774 Albbruck