ABC Design Turbo 6 S User manual

Turbo 6 S
- 6-wheeled pram with reversible seat unit
- including soft carry cot
- handle height adjustable
- suitable from 6 months - 3 years (max. 15 kg)
with carry cot suitable from date of birth
- 4-times adjustable backrest
- weight: 12 kg
- corresponding to EN 1888 : 2005
Attention:
Attention:Attention:
Attention:
This product is not usable for running or
This product is not usable for running orThis product is not usable for running or
This product is not usable for running or
skating
skatingskating
skating

Dear Customer,
Congratulations on the purchase of your ABC-Design Stroller. We are pleased that you have chosen one of our products and hope that you will be
completely satisfied with the service you receive from the product. We advise you to read the Instruction Leaflet carefully before use of the pram
and then to keep it in a safe place. If you fail to do this the safety of your child can be jeopardised. Kindly pay attention to the washing and care
instructions so that you enjoy long and trouble free use of your new purchase.
Your ABC-Design Team
Hints for care and use
Hints for care and useHints for care and use
Hints for care and use
1. The manufacture of materials used in the fabrication of this product meet the standards required by the AZO, EN71-2 und EN71-3. for clothing
claimed light originality values. However, we advise you not to expose the product to the sun for a long time. Attrition and fading of colours during
heavy solar radiation do not justify a damage claim. The fabric case of your stroller is washable. You can wash the case by hand or machine cold
wash.
2. Each product frame is manufactured according to EN 1888: 2005 standards. To maintain the safety of your product, the moving components
must be lubricated regularly and if required rerivetted.
Look out: Use only silicon-oil or silicon-spray for oiling.
3. Regular care and maintenance contribute to the safety and longevity of your product. Environmental influences such as salty air, road strewn salt
or acid rain as well as outdoor storage contribute towards corrosion. Therefore always store your pram indoors.
4. We recommend regular maintenance of all varnished components. Should the frame and varnished components become soiled use a damp
cloth moistend with water diluted mild detergent to wipe away the dirt.
5. Damaged air tubes are no reason for reclamation. Spare tubes can be bought in all retail shops.
By adhering to the aforementioned hints you will enjoy satisfactory use of your ABC-Design product for a long time.
page 2

1. Unfolding the stroller
1. Unfolding the stroller1. Unfolding the stroller
1. Unfolding the stroller
Pull the handle of the pram (1) upwards until the frame is
locked (2).
WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before
using.
2. Wheel installation
2. Wheel installation2. Wheel installation
2. Wheel installation
Put the wheels into the fixation until it is locked properly.
For removing the wheels push down the button located on the
axle as shown on the right picture. Now you can easily remove
the wheel from the axle.
Push the wheel block into the frame until it clicks.
Please pay attention that the breaking lever shows to the front
side.
To remove the wheel block, please push the lever
at the wheel block down and pull away the wheel block
from the frame.
page 3

3. Fixation of the front wheel
3. Fixation of the front wheel3. Fixation of the front wheel
3. Fixation of the front wheel-
--
-block
blockblock
block
To fix the front wheels, push the fixation-lever up.
To release the front wheels, push the fixation lever down.
4. Fixation seat unit
4. Fixation seat unit4. Fixation seat unit
4. Fixation seat unit
For fixing the seat unit put it onto the frame until it is locked
porperly.
For reversing the seat unit push the button upwards as shown
on the picture. Move the seat unit and take it away.
page 4

5
55
5. Fixing and removing of the break
. Fixing and removing of the break. Fixing and removing of the break
. Fixing and removing of the break
For fixing the breaks you have to push down the lever.
For removing the breaks you have to lift the lever.
6
66
6. Fixing and removing of the
. Fixing and removing of the. Fixing and removing of the
. Fixing and removing of the bumper
bumperbumper
bumper
For fixing the bumperbar please take it into both plastic
fixations on the left and right side as shown on the picture.
For removing the bumper from the stroller turn both clips to
the inner side and pull the bumper to the front.
7
77
7. Bumper heig
. Bumper heig. Bumper heig
. Bumper height adjustment
ht adjustmentht adjustment
ht adjustment
To adjust the bumper, push both buttons to the inner side.
Now you can easily fix the bumper in the required position.
page 5

8. Belt locking
. Belt locking. Belt locking
. Belt locking
For locking the belt put both plastic parts (1) together until it
locks.
W
WW
WAR
ARAR
ARNING
NINGNING
NING:
::
: Please use the pelvic belt together with the crotch
belt
9
99
9. Belt opening
. Belt opening. Belt opening
. Belt opening
For belt opening, put both plastic parts together (1) and then
pull it apart (2).
10
1010
10. Backrest adjustment
. Backrest adjustment. Backrest adjustment
. Backrest adjustment
To adjust the backrest in the height, push the lever located at
the rear side of the backrest and fix it in the required position.
page 6

1
11
11
11
1. Adjustment of the handlebar
. Adjustment of the handlebar. Adjustment of the handlebar
. Adjustment of the handlebar
To adjust the handle in height you have to push the button at
the top as shown on the photo. Now you can fix the handlebar
in the requested position.
1
11
12
22
2. Adjustment of the legrest
. Adjustment of the legrest. Adjustment of the legrest
. Adjustment of the legrest
To adjust the legrest push both buttons on both sides to the
inner side and adjust the height.
1
11
13
33
3. Removal of the canopy
. Removal of the canopy. Removal of the canopy
. Removal of the canopy
For removing the canopy you have to open the zipper at the
side of the canopy.
For fixing the canopy you have to close the zipper.
page 7

1
11
14
44
4. Folding the stroller
. Folding the stroller. Folding the stroller
. Folding the stroller
For folding the stroller push the button as shown on the
picture.
Push the handle downwards.
Now you have to turn the black button (1) to the left and keep
on pushing the black button (2)
Now you can easily fold the stroller.
Remark: To build up the stroller, use the procedure as
mentioned in point no. 1.
WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before
using.
page 8

Carry Cot
Carry CotCarry Cot
Carry Cot CARRY
CARRYCARRY
CARRY SOFT
SOFTSOFT
SOFT
15.
15.15.
15. Fixation of the
Fixation of theFixation of the
Fixation of the CARRY
CARRYCARRY
CARRY SOFT
SOFTSOFT
SOFT at the stroller
at the strollerat the stroller
at the stroller
Put the backrest to the lying position
Put the carry cot onto the lying area
Fix the straps, which ar
e fixed at the carry soft at the frame of
the stroller as shown on the picture and close the press
button.
Take the fixation strap at the backside of the bag and put it
around the backrest.
Now close the clips as shown on the picture.
page 9

Pull the harness of the stroller through the holes at the
bottom of the carry cot.
Now you can fix your baby in the carry cot.
16.
16.16.
16. How to change the carry cot to a foot muff
How to change the carry cot to a foot muffHow to change the carry cot to a foot muff
How to change the carry cot to a foot muff
First you must remove the bottom plate of the carry cot.
To take it out you must open the Velcro at the foot part of
the carry cot.
To remove the side part plates please open the velcros at
both sides of the head part of the carry cot.
Now you can use the carry cot as a foot muff!
Warning:
Warning:Warning:
Warning: The carry cot is only allowed to be used as a carry
cot when the side plate and bottom plate is inside the carry
cot.
page 10

- Please read this instruction carefully before using the stroller. If you don’t pay attention to these
instructions, the safety of your baby can be in danger.
- This stroller is suitable for babies from the age of 6 month (by using a carry cot from date of birth)
till the age of 3 years and a weight up to 15 kg.
- WARNING:
WARNING:WARNING:
WARNING: Never leave you child unsupervised in the stroller!
- WARNING:
WARNING:WARNING:
WARNING: Please make sure that all locks are closed before using.
- WARNING:
WARNING:WARNING:
WARNING: Always use the safety belt when your child is in the stroller.
- The mesh basket is suitable for a maximal weight of 2 kg.
- This stroller is suitable for one baby.
- The brakes have to be fixed, while taking the child in or out.
- WARN
WARNWARN
WARNING:
ING:ING:
ING: Please use the pelvic belt together with the crotch belt
- WARNING:
WARNING:WARNING:
WARNING: If you carry the stroller up- or downstairs always take your child out of the stroller.
- WARNING:
WARNING:WARNING:
WARNING: When using the carry cot please make sure that the carry cot is fixed in the right way.
- From time please check loosen parts regularly and lock it again.
Maximum air wheel pressure from 1, 5 bars to maximum 1, 8 bar.
No reason for reclamation is also air escaping of the wheel.
WARNING:
WARNING:WARNING:
WARNING: If you place heavy weight at the handle, the stability of the stroller is in danger
WARNING:
WARNING:WARNING:
WARNING: Keep away from fire
WARNING:
WARNING:WARNING:
WARNING: This stroller is no sport vehicle and may not used for jogging or inline-skating.
- Do not use a Kiddyboard, the stroller is not approved for use of a Kiddyboard.

- Normal problems regarding to years of wear and damages through heavy uses is no reason for
reclamation.
- Damages which are caused by wrong using of this product are no reason for reclamation.
- Damages through wrong installations are no reason for reclamation.
- Flat air tubes caused through long time standing periods are no reason for reclamation.
- Flat air tubes caused by nails, glass fragments, etc. are no reason for reclamation.
- Damages through wrong using of the stroller are no reason for reclamation.
- Parts of rust caused by missing servicing are no reason for reclamation.
- Scratches are normal damages and are no reasons for reclamation.
- Damp textile parts, which can’t be dried or mouldy parts, are no reason for reclamation.
Through sun intensity, sweat, cleansing agent, rub-downs or often washings, the fabric colour can
fade out. And this is also no reason for a reclamation.
- Used wheels are normal damages and are no reason for reclamation.
ABC Design GmbH
Dr. Rudolf-Eberle-Str. 29
D-79774 Albbruck