ABSCO SHEDS 23151SK-PTX User manual

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 1
CONCRETE SLAB
+
We highly recommend downloading the Absco Sheds
Assembly App to assist with your build.
ASSEMBLY APP AVAILABLE ON
Scan to
download
STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY
CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS
AU: 1800 029 701
N Z: 0800 466 444
[email protected]
www.abscosheds.com.au
[phone] [email protected]
www.abscogardensheds.com
[phone] PLEASE LEAVE A REVIEW
www.abscosheds.com.au/review
When laying a concrete slab for your shed, it is
best practise to have a rebated edge to prevent
water ingress.
Rebated section is 1” high and inset 3” on all sides
from the overall slab base dimensions
Overall slab base
dimensions for this
model are as shown
above.
Illustration not to
scale.
1”
3”
RAISED FLOOR
INSIDE SHED
4”
3”
WALLS SIT
ON THIS LEVEL
93”
63.8”
4”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 2
2 - 3 people Approx. 8 hours
4
NUMBER OF HOURS REQUIRED
ASSEMBLY DIFFICULTY
NUMBER OF PEOPLE REQUIRED
Basic Complex
TOOLS REQUIRED
RECOMMENDED
Personal protective
equipment for tools
Hand
Protection
Enclosed
Shoes
Raised work surface. EG
Sawhorses and timbers
Heavy and/or bulky. Multi-
person lift or mechanical aid.
5/16” Hex driver bit
Ladder Hammer drill Shifter
metal & masonry drill bits
to suit anchor fasteners
Pop riveter
SUPPLIED
TinsnipsCordless drill
GENERAL INSTRUCTIONS
• Before commencing any assembly, read
through these instructions in detail to gain
a thorough understanding of assembly
methods and associated details.
• Unpack the carton and carefully identify
and check off all the parts against the
parts described and illustrated on
"COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An
uneven surface may result in misalignment
of parts.
• The shed shall be erected on top of a
reinforced concrete slab and anchored
down appropriately illustrated on “FINAL
CONSTRUCTION” page.
SAFETY NOTES
• Some parts may have sharp edges. It is
advisable to wear gloves when handling these
items and safety glasses if drilling holes.
Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored
to a solid foundation immediately after
construction is completed.
• It is highly recommended to erect the shed
with two or more people.
• Do not sit, stand or walk on the roof of your
shed.

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 3
COMPONENT PACKING LIST
Check off all components.
2
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY QTY
1
1
1
1
1
3
2
1
263
STEEL SHEET
STEEL SHEET 260L
STEEL SHEET 260R
STEEL SHEET 261L
STEEL SHEET 261R
STEEL SHEET B
STEEL SHEET 43S
STEEL SHEET 32A
262
STEEL SHEET
72.9” TO MIDPOINT
X 30.4”
MIDPOINT
72.9” TO MIDPOINT
X 30.4”
MIDPOINT
77.9” TO MIDPOINT
X 30.4”
80.5” x 30.4”
2045 x 30.4” 63.4” x 30.4”
70.3” x 28.8”
67.9” x 30.4”
MIDPOINT
77.9” TO MIDPOINT
X 30.4”
MIDPOINT
Nominal sheet widths are shown
+/- 0.08” is within tolerance

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 4
COMPONENT PACKING LIST
Check off all components.
1
1
1
1
1
2
2
1
81E
1
2
58A
58B
58C
54AL
54CL
54BL
81DL
79B
61D
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY QTY
281CL
1
1
1
1
54AR
54CR
54BR
81DR
281CR
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 44.35”
CHANNEL
L = 60.2”
HINGED CHANNEL
L = 67.9”
CHANNEL
L = 67.9”
CHANNEL
L = 30.4”
CHANNEL
L = 31”
CHANNEL
L = 59.5”
CHANNEL
L = 44.35”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 5
COMPONENT PACKING LIST
Check off all components.
1ASSEMBLY
INSTRUCTIONS
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY QTY
INSTRUCTIONS & FITTINGS PACKET
12A
1
89A
1
1
1
2
2
91A
88J89B
90B
CSJ
6
PSTKSGL - SINGLE DOOR FITTINGS PACK
1FAST006 1PADBOLT
HASP FAST007
1DRILL
1SCREW
PACK 6 PACK6P
1
PHILLIPS HEAD
DRIVER BIT
S2 PH2
FAST038
1
8G x 3/8 SELF
TAPPING SCREWS
x 220
PACK220
PACK6P - SCREW PACK 6
6SBS43E
POP RIVET FAST009 6
3/16" x 1/2"
COUNTERSUNK
SCREW & NUT
FAST004
FAST005
1PSTKSGL
SINGLE DOOR FITTINGS PACK
JAMB L = 70.2” JAMB L = 40”
LIP L = 63.4”
CHANNEL JOINER
L = 7.9”
DOOR STRAP
L = 6.5”
PADBOLT
L = 4.5”
1/8” DRILL
BIT
POP RIVET GUN INCLUDED
JAMB L = 70.2”
JAMB L = 30.8”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 6
PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D
1/8”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 7
Guide on Joining Spliced Channels
The text marked on all parts must be shown on the same side as each other
Step 1.
Position the channels and the
CSJ joiner so the centre of
the CSJ is in line with the end
of each channel to be joiner
together.
Step 2.
Join the first channel to the CSJ
by inserting the centre of the
CSJ, on an angle, to the end of
the channel where the JOIN>>
text is marked.
Push down one side of the CSJ
until you hear a ‘click’.
Step 3.
Join the second channel to the
CSJ by positioning the <<JOIN
of the channel at the centre of
the CSJ, on an angle. Push the
CSJ into the channel until you
hear a ‘click’.
Finished Channel.
The joined channels should
now look like the picture with
the CSJ positioned equally
inside of the joined channels.
Drill out holes with 3mm drill
bit in CSJ to match the holes
in channel. Drilling of screws
on the joined channels is being
done after sheets are locked on
the spliced channels.
= =
JOIN>> <<JOIN
CSJ
==
JOIN>>
J
==
JOIN>> SJ
= =
JOIN>>
<<JOIN
= =
JOIN>> <<JOIN
Finished Spliced
Channel
Channel
Push
20mm 15mm
CSJ
.
...
1/8”
0.6”0.8”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 8
PRE-ASSEMBLY OF SPLICED CHANNELS
NOTE: Some channels may have holes in them - You will
need to redrill holes where CSJ joining channel covers
them.
Join together 12x channel sections using 6x channel joiners (Part CSJ)
2x 81CR
2x 81CL
= 2x 81C
1x 54AR
1x 54AL
= 1x 54A
1x 54CR
1x 54CL
= 1x 54C
1x 54BR
1x 54BL
= 1x 54B
1x 81DR
1x 81DL
= 1x 81D
81CL
54AL
54CL
54BL
81DL
54CR
54BR
81DR
88.7”
54AR
81CR

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 9
OVERVIEW OF ROOF COMPONENTS
OVERVIEW OF ROOF COMPONENTS
43S
43S
43S
88J
81C
88J
81C

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 10
OVERVIEW OF WALL COMPONENTS
OVERVIEW OF WALL COMPONENTS
32A
32A
260L
261L
262
263
262
261R
260R
22A
79B
54C
89B
B
91A
61D
54B
54A
81E
61D
81E
81D
89A
90B

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 11
REAR PANEL ASSEMBLY
262
263
262
SNAP
T TE
i
SNAP
T TE
i
54B
81D
1x required

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 12
SIDE PANEL ASSEMBLY
1x LEFT SIDE PANEL
1x RIGHT SIDE PANEL
260L
261L
261R
260R
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
TTE
i
61D
81E
81E
61D

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 13
ROOF PANEL ASSEMBLY
43S
43S
43S
SNAP
T TE
i
SNAP
T TE
i
81C
88J
81C
88J
D
D

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 14
FRONT PANEL ASSEMBLY
89B
89A
32A
32A
54A
79B
54C
90B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 15
DOOR PANEL ASSEMBLY
Vertical door channels are
installed in the opposite
orientation compared to the
horizontal door channels.
Short flange
of channel
Long
flange of
channel
SINGLE DOOR
58C
58C
SNAP
T
TE
i
SNAP
T TE
i
12A
B
B
58B
58A
D
D
D
D

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 16
SINGLE DOOR PANEL
NOTE: Nuts and bolts are also
supplied and may be used instead of
rivets. Use a 4mm drill bit to enlarge
these holes in the jamb
NOTE: The holes to fasten the padbolt hasp are not
pre-punched to allow for proper alignment. Position
the hasp centrally over the padbolt shaft and drill 3mm
holes and secure with screws.
91A
91A
DOOR PANEL ASSEMBLY
B
1/8”

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 17
PANEL CONSTRUCTION
NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel
are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
Side wall channels fit into the
notched rear wall channels.
D
D
D
D
D
D
D
D
D
D
D
D

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 18
FINAL CONSTRUCTION
D
D
D
D
D
D
D
D
D
D
D
D
250 250
250 250 360 360
250250 250250
590 590 590
ANCHORING OF SHED
Location of 12
concrete anchors
10”
2” 5”
23” 23”
15” 15”
15” 15”
23” 23” 23” 10”
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
Each anchor consists of one
nut, bolt, dynabolt and steel
angle.
Drill a hole into the wall sheet
to suit the bolt
Drill a hole into the concrete to
suit the dynabolt

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23151SK-PTX
7’ W x 5’ D x 5’11”, 6’10” H
Model: 23151SK-PTX 3/3/2023 1.3 19
1 | P a g e
EXPORT PRODUCT WARRANTY
AGAINST DEFECTS
Congratulations on your purchase of an ABSCO SHED
ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages,
awnings and carports are made using high quality Australian made steel.
We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or
blister for 12 years from date of purchase.
This warranty does not apply to surface deterioration of panels caused by ‘Swarf” (Tiny
particles of steel debris left from cutting, grinding or drilling operations) that has not been
removed after building construction, or as a result of contact with damp soil, chemicals,
fertilisers or other corrosive substances.
This warranty covers any Absco product used for normal domestic use and installed in
accordance with the installation instructions.
This warranty does NOT cover Damage caused by storms, wind, rain, snow or poor
foundations.
This warranty does NOT cover ABSCO products installed in severe coastal, industrial or
other highly corrosive environments. The warranty does not cover fasteners (screws, nuts,
bolts, rivets, hasps or sliding padbolts).
The warranty is limited to replacement and delivery of components and does not include any
labour or installation costs. The benefits given by the warranty are in addition to your other
rights and remedies under a law in relation to the goods or services to which the warranty
relates.
In the unlikely event a warranty claim is made, it must be supported by photographic
evidence and details of the defect, including component part numbers, together with proof
of purchase documentation (or on-line registration of purchase) and forwarded to the
address below. Upon receipt of the warranty claim, the Customer Service Manager will
contact you within three business days to advise you of the assessmentoutcome of the
claim, which may include your expenses incurred in making the claim.
THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110
PHONE: [phone] EMAIL: wa[email protected]m.au
Issued 16 July 2019