ABSCO SHEDS Premier User manual

ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 1 16/07/19
Premier Garden Shed
Assembly Instructions
Model: 30152GK-PTX
CONCRETE SLAB
PAGE 1
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
10’ 2 3/64”
5' 3 25/32"
FRONT: 9' 10 7/64"
SIDE: 4' 11 13/16"
HEIGHT: 6' 4 3/4"
Absco Premier Garden Shed
Assembly Instructions
Model: 30152GK
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A REBATED
EDGE 1” DEEP AROUND THE PERIMETER
CONCRETE
REBATED EDGE
CHANNEL
CONCRETE SLAB
3” WIDE
REBATE
THIS WILL HELP
WATER EGRESS FROM
THE BASE OF THE SHED
100mm
We thank you for choosing an Australian Made Shed. For further assistance please
visit our detailed instructional video library at
www.abscosheds.com.au/USA
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
[email protected]

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 2 16/07/19
Premier Garden Shed - Model: J30232G
PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
The site for the shed must be level.
It is recommended that the shed be set on a 4" concrete slab and
anchored down appropriately (refer last page for details).
Anchor sets are not supplied as standard items with this product.
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
Normal 1/8", 11/64"
Masonry 25/64"
Normal 25/64"
OPTIONAL

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 3 16/07/19
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 3
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
30A
2
31A
2
36L
2
36R
2
15A
2PEAK BRACE
58C
4CHANNEL
2CHANNEL 82L
2CHANNEL 81E
58B
1CHANNEL
58A
2CHANNEL WITH HINGES
79A
1CHANNEL
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
34A
2
A
1
52A
8
B
1
2CHANNEL 82R
82R
82L
79A
81E
58C
58B
58A
STEEL SHEET
5' 10 9⁄32" Long
2' 6 7⁄16" Wide
STEEL SHEET
5' 10 9⁄32" Long
2' 6 7⁄16" Wide
STEEL SHEET
5' 7 29⁄32" Long
2' 6 7⁄16" Wide
STEEL SHEET
5' 7 29⁄32" Long
2' 6 7⁄16" Wide
STEEL SHEET
5' 10 9⁄32" Long
2' 3 63⁄64" Wide
STEEL SHEET
6' 3 25⁄64" Long
2' 6 7⁄16" Wide
STEEL SHEET
2' 7 5⁄16" Long
2' 6 7⁄16" Wide
STEEL SHEET
6' 3 25⁄64" Long
2' 6 7⁄16" Wide
L = 5' 7 29⁄32"
L = 5' 7 29⁄32"
L = 2' 6 7⁄16"
L = 5' 1 47⁄64"
L = 4' 11 9/16"
L = 2' 6 3/16"
L = 2' 6 3/16"

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 4 16/07/19
55BL
1CHANNEL
81BL
1CHANNEL
81AL
2CHANNEL
60AL
2CHANNEL
97AL
1RIDGE
BEAM
55AL
1CHANNEL
55CL
1CHANNEL
81B
55A
55C
55B
60A
81A
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 4
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
55BR
1CHANNEL
81BR
1CHANNEL
81AR
2CHANNEL
60AR
2CHANNEL
97AR
1RIDGE
BEAM
55AR
1CHANNEL
55CR
1CHANNEL
81B
55A
55C
55B
60A
81A
CSJ
8ZARSP
THESE COMPONENTS ARE TO BE
JOINED
TO THESE COMPONENTS
1
CHANNEL JOINER RIDGE BEAM JOINER
L= 1' 5 23⁄32"
L= 7 7⁄8"
L = 4' 10 59⁄64" L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 3' 811⁄32"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 4' 10 59⁄64"
L = 3' 811⁄32"
L = 4' 11 7⁄8" L = 4' 11 7⁄8"

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 5 16/07/19
PAGE 5
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
14A
2CAP GABLE
L: 6 11/16"
12
11/64” CSK SCREW &
NUT SECURE HINGES
TO DOOR
(ALTERNATE METHOD)
8
5/32” NUT & BOLT SET
SECURE TWO
PADBOLTS TO DOOR
SHEET
220 SELF TAPPING
SCREWS
3DOOR
PADBOLT 2
DOOR
PADBOLT
HASP
12 POP RIVETS SECURE
HINGES TO DOOR
1
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
12A
2
DOOR
STRAP
L: 6 1/2"
22A
90A
JAMB L= 5' 1 3/4"
1
91A
JAMB L= 3' 8 1/8"
4
85A
LIP TRIM L= 2' 7 5/16"
4
89C
JAMB L= 5' 7 15/16"
1
89A
JAMB L= 5' 10 1/4"
2Part No. Here
Part No. Here
Part No. Here
Part No. Here
85A
8SELF DRILLING HEX
HEAD TEK SCREWS (NO
HOLE REQUIRED) 1/8" DRILL BIT
HEX TEK SCREW
DRIVER BIT
1
1
RIVET GUN

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 6 16/07/19
20mm
15mm
QTY = 10pcs.
CHANNEL
(0.79")
(0.59")
PUSH PUSH
CHANNEL
CSJ
PAGE 6
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
CSJ
CSJ
HIGH-SIDE
CHANNEL
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ
= =
= =
==
=
=
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
=
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
FINISHED CHANNEL
=
NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
JOIN>> <<JOIN JOIN>>
JOIN>> SJ
JOIN>>
<<JOIN
JOIN>> <<JOIN
J
CSJ
DRILL 4mm (0.16") x 3mm (0.12")
(2 PER A SIDE) HOLES TO
SECURE SECTIONS TOGETHER.
(THESE SCREWS MAY HAVE TO
BE TEMPORARILY REMOVED
AND REPLACED DURING LATER
ASSEMBLY)
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 7 16/07/19
PAGE 7
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
=
=
=
=
=
=
2 X 60AR
9' 9 13/16"
STEP 1. PRE-ASSEMBLY OF SPLICED CHANNELS
2 x 81A
2 x 60A
1 x 55A
1 x 55C
1 x 55B
1 x 81B
NOTE: JOIN TOGETHER 16 X CHANNEL SECTIONS USING 8 X CHANNEL JOINERS (PART CSJ)
81BR
81BL
55BL
55BR
55CR
55CL
55AL
55AR
60AR
60AL
81AL
81AR
2 X 81AR
2 X 81AL
2 X 60AL
1 X 55AR
1 X 55AL
1 X 55CR
1 X 55CL
1 X 55BR
1 X 55BL
1 X 81BR
1 X 81BL
NOTE: SOME CHANNELS HAVE
HOLES IN THEM - YOU WILL NEED
TO RE-DRILL HOLES ON ANY
CHANNEL WHERE THE CSJ
JOINING CHANNEL COVERS
HOLES ON THE CHANNELS
YOU ARE CONNECTING
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 8 16/07/19
PAGE 8
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14
STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 2" OVERLAP
OF THE RIDGE CAP
STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS.
MAKE SURE JOINER HAS 8 55/64" IN EACH RIDGE CAP.
STAGE 3: TURN RIDGE CAP OVER AND MEASURE 9 27⁄32" FROM THE END
OF EACH RIDGE CAP.
PLACE TEK SCREWS IN 2" INCREMENTS FROM SAID END.
REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM
INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM
2"
8 55⁄64"
2"
2"
Premier Garden Shed - Model: J30232G
INSTRUCTIONAL
VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 9 16/07/19
PAGE 9
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
TEK SCREW DRIVER BIT
QTY. = 1
QTY. = 8
QTY. = 2
QTY. = 1
SELF DRILLING TEK SCREW
PART ZARSP - 1' 5 11/16" LONG
ZARSP
RIDGE BEAM 4' 11 7/8"
PARTS 97AL & 97AR
STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM
PUSH PUSH
97AL
97AR
5/8"
7 7/8"
9 13/16"
9' 9 13/16" OVERALL LENGTH
(PART 97A)
5/8"
THE TOP SECTIONS OF
CAPPING WILL OVERLAP
EACH OTHER AT THE
JOIN BY 2”.
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 10 16/07/19
Premier Garden Shed - Model: 30152GK
85A
60A
14A
85A
81A
85A
85A
VIEW OF ROOF COMPONENTS
14A
81A
97A
52A
52A
52A
52A
NO.
PAGE 10
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
52A
52A
52A
52A
INSTRUCTIONS
AND VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 11 16/07/19
VIEW OF WALL COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
36L
36R
82R
31A
30A
31A
30A 36R
36L
34A
34A
A
B
22A
81E
81B
55B
15A
82R
82L
55A
82L
55C
91A
81E
90A
91A
89A
89A
79A
PAGE 11
INSTRUCTIONS
AND VIDEOS

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 12 16/07/19
PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 13 16/07/19
1. REAR PANEL ASSEMBLY
2. SIDE PANEL ASSEMBLY
(2 Required)
PAGE 13
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
55B
81B
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
SNAP
T TE
i
SNAP
T TE
i
TRIM THE TIP OF EACH
SHEET OR BEND OUT
OF THE WAY TO ALLOW
CHANNELS TO FIT HARD
UP TO THE EDGE OF
THE SHEET
30A
31A
31A
30A
36L
36R
82R
81E
15A
82L
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 14 16/07/19
2 x PRE-PUNCHED
HOLES TO THIS
END OF EACH
SHEET WITH PART
NO. 81A FITTED
3. ROOF PANEL ASSEMBLY
(2 Required)
PAGE 14
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
SNAP
T TE
i
SNAP
T TE
i
52A
52A
52A
52A
85A
81A
85A
60A

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 15 16/07/19
4. FRONT PANEL ASSEMBLY
PAGE 15
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
89A
89A
55A
90A
79A
55C
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
34A
34A
55A
90A
89A
55A
55A
55A
55C
89A
90A
89A
79A
55C
89A
79A

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 16 16/07/19
PAGE 16
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
DOOR PANEL ASSEMBLY
13/16”
58C
58C
FOUR HOLE SET
FOR PADBOLT
CONNECTION
58C
12A
58C
58A
58A
9/16” FLANGE
A
B
89C
58B
A
B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
ALL VERTICAL DOOR CHANNELS
ARE INSTALLED IN THE REVERSE
DIRECTION IN COMPARISON TO
HORIZONTAL DOOR CHANNELS
FLANGE
5.

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 17 16/07/19
DOOR PANEL ASSEMBLY
NOTE: Nuts and bolts (supplied) may be
used instead of pop rivets (supplied) by
simply enlarging the hinge hole sets in the
jamb using a 5/32" drill bit
PAGE 17
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
91A
91A
A
B
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
NOTE: The two holes required to connect the padbolt hasp for ea
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for ch door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt
proper alignment. position each hasp centrally over the padbolt shaft, and secure with screws. The sheet metal shaft, and secure with screws. The sheet metal
screws supplied have the ability to self drill through the chanscrews supplied have the ability to self drill through the channel, use a continuous firm pressure and high drillnel, use a continuous firm pressure and high drill
speed and the screws will penetrate the sheet metal. If necessaspeed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used.ry a 3mm drill bit can be used (1/8")

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 18 16/07/19
PAGE 18
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
7. PANEL CONSTRUCTION
NOTE: Take care to ensure that both front
and rear wall panels are not positioned
upside down. The top channel of each
panel is pre-punched for attaching roof
sheets, the bottom channels
are not.
SIDE WALL PANEL
CHANNELS FIT INTO THE
NOTCHED FRONT AND
REAR WALL PANEL
CHANNELS
CHANNEL TYPE 60A
THIS END
CHANNEL TYPE
81A THIS END
97A

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 19 16/07/19
SLIDE THE ROOF PANEL INTO
POSITION, AND SECURE WITH
ONE SCREW AT EACH CORNER
ONLY AT THIS STAGE
SECURE PEAK
BRACE TO RIDGE
BEAM AND ROOF
PANEL WITH ONE
SCREW AT EACH
END
MOVE THE OTHER
ROOF PANEL INTO
POSITION AND SECURE
PEAK BRACE TO RIDGE
BEAM AND ROOF
PANEL WITH ONE
SCREW AT EACH END
8. ROOF CONSTRUCTION
PAGE 19
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
INSIDE VIEW OF FIXING

INSTRUCTIONS
AND VIDEOS
Premier Garden Shed
Model: 30152GK-PTX
ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTXABSCO INDUSTRIES PAGE 20 16/07/19
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
FINAL CONSTRUCTION
BEND THE TOP AND BOTTOM
FLANGES AS SHOWN, THEN HOOK
THE BOTTOM FLANGES UNDER THE
TOP CHANNEL AND SCREW THE TOP
FLANGES FOR BOTH AS SHOWN
GABLE CAPS
PAGE 20
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16
14A
Premier Garden Shed
Model: 30152GK
INSTRUCTIONS
AND VIDEOS
ANCHORING OF SHED
LOCATION OF 12
CONCRETE ANCHORS
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 25/64" HOLE INTO THE WALL SHEET
- DRILL A 25/64" HOLE INTO THE CONCRETE