ABSCO SHEDS CHICKEN COOP User manual

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 1
DOWNLOAD
OUR APP FOR
ASSEMBLY
VIDEOS
LEAVE A REVIEW
Tell us about your experience and
receive a $20 Coles Gift Card.
Visit www.abscosheds.com.au/review
AU: 1800 029 701
NZ: 0800 466 444
[email protected]
www.abscosheds.com.au
3060mm
1620mm
CONCRETE SLAB
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
Printed: 02/08/2021 14:21

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 2
3mm drill bit 10mm drill bits metal & masonry
GENERAL INSTRUCTIONS
• Before commencing any assembly, read through these instructions in detail to gain a thorough
understanding of assembly methods and associated details.
• Unpack the carton and carefully identify and check off all the parts against the parts described
and illustrated on "COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An uneven surface may result in misalignment of parts.
• The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately
illustrated on “FINAL CONSTRUCTION” page.
TOOLS REQUIRED
SAFETY NOTES
• Some parts may have sharp edges. It is advisable to wear gloves when handling these items and
safety glasses if drilling holes. Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored to a solid foundation immediately after construction is
completed.
• It is highly recommended to erect the shed with two or more people.
RECOMMENDED

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 3
COMPONENT PACKING LIST
Check off all components.
SHEETING
QTY COMPONENT
DESCRIPTION
PART
No. CHK QTY COMPONENT DESCRIPTION
PART
No. CHK
2STEEL SHEET
1785 x 773mm 30A 2 STEEL SHEET 1785 x 731mm 33A
1STEEL SHEET
1785 x 773mm 30G 1 STEEL SHEET 1725 x 711mm 37A
4STEEL SHEET
1592 x 773mm 43A 6 STEEL SHEET 600 x 773mm 31D
6MESH SHEET
1195 x 705mm MESH20
INSTRUCTIONS AND FITTINGS PACKET
1DOOR PLATE 12A 1
8G x 3/8” SELF
TAPPING SCREW
PACK QTY 220
FAST001
63mm POP RIVET FAST009 15 8G x 20mm SELF
TAPPING SCREW FAST013
1PADBOLT
115mm LONG FAST006 1PADBOLT HASP FAST007
6
3/16 x 1/2”
CSK SCREW
& NUT
FAST004
FAST005 1PHILLIPS HD
DRIVER BIT FAST038
13mm
DRILL BIT DRILL 6CHANNEL JOINER CSJ
Nominal sheet widths are shown. +/- 2mm is within tolerance.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 4
COMPONENT PACKING LIST
CHANNEL PACK
QTY COMPONENT
DESCRIPTION
PART
No.
COMPONENT
DESCRIPTION
PART
No. CHK
3CHANNEL
1785mm
CHANNEL
1513mm 81F
1CHANNEL
1513mm
CHANNEL
1488mm 53T
2CHANNEL
1231mm
CHANNEL
1707mm 313R
2CHANNEL
1707mm
CHANNEL
1231mm 314R
2CHANNEL
1496mm
CHANNEL
1496mm 81AR
2CHANNEL
712mm
CHANNEL
712mm 181
1CHANNEL
1725mm
CHANNEL
720mm 54G
1CHANNEL
1725mm
LIP TRIM
mm 88A
12 JAMB
1785mm
JAMB
1080mm 91E
1JAMB
1785mm
JAMB
1785mm 89B
1JAMB
720mm
Check off all components.
1597
QTYCHK
80L
53C
313L
314L
58M
58B
58A
70D
89A
91D
81AL
1
2
2
2
12
1
2
2
1
2

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 5
SNAPTiTE ASSEMBLY GUIDE
The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for
tools and fasteners.
To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.
Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along
the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off
from the side.
Channel locks the shed panel into
position without the need for screws!
FASTENING SYMBOLS
Secure channel to sheeting by SNAPTiTE
fastening method.
Join components together with one
screw at this location only, as some
channels have extra holes that are not
required for this model of shed.
Do not join components together at
this location yet, as the screws may
obstruct further assembly of the other
components.
Join components together by pre-drill-
ing the holes first. Use one component as
template to mark where the holes are and
drill with a 3mm drill bit.
3mm pop rivet
4mm nut and bolt set.
D
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 6
Guide on Joining Spliced Channels
The text marked on all parts must be shown on the same side as each other
Step 1.
Position the channels and the
CSJ joiner so the centre of
the CSJ is in line with the end
of each channel to be joiner
together.
Step 2.
Join the first channel to the CSJ
by inserting the centre of the
CSJ, on an angle, to the end of
the channel where the JOIN>>
text is marked.
Push down one side of the CSJ
until you hear a ‘click’.
Step 3.
Join the second channel to the
CSJ by positioning the <<JOIN
of the channel at the centre of
the CSJ, on an angle. Push the
CSJ into the channel until you
hear a ‘click’.
Finished Channel.
The joined channels should
now look like the picture with
the CSJ positioned equally
inside of the joined channels.
Drill out holes with 3mm drill
bit in CSJ to match the holes
in channel. Drilling of screws
on the joined channels is being
done after sheets are locked on
the spliced channels.
= =
JOIN>> <<JOIN
CSJ
==
JOIN>>
J
==
JOIN>> SJ
= =
JOIN>>
<<JOIN
= =
JOIN>> <<JOIN
Finished Spliced
Channel
Channel
Push
20mm 15mm
CSJ
.
...

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 7
Join together 12 x channel sections using 6 x channel joiners (Part CSJ)
2x 313L
2x 313R
2x 314L
2x 314R
2x 81AL
2x 81AR
2938mm
313R
314R
81AR
313L
314L
81AL
= 2x 313
= 2x 314
= 2x 81A
PRE-ASSEMBLY OF SPLICED CHANNELS
NOTE: Some channels may have holes in them - You will
need to redrill holes where CSJ joining channel covers
them.
2992mm

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 8
ROOF AND WALL OVERVIEW
Mesh panels not shown for illustrative purposes.
31D
31D
31D
31D
31D
31D
70D
314
70D
70D
70D
70D
70D
70D
70D
54G
91D
33A
30A
33A
30A
53C
81F
313
181
181
181
181
181
181
181
181
181
181
313
53T
53T
314
30G
70D
80L
80L
181
89A
89B
80L
181
43A
43A
43A
43A
81A
81A
88A
88A
37A
12A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 9
ROOF PANEL
1x required
88A
81E
81A 88A
88A
81A
88A
43A
43A
43A
43A
43A
43A
FAST001 x12
FAST001 x8
81A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 10
RIGHT SIDE PANEL
1x required
33A
30A
70D
313
70D
70D
80L
314
80L
70D
Small pan of 33A to this side
1.
70D
181
181
181
70D
70D
80L
31D
31D
33A
30A
313
314
FAST001 x14
x2

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 11
RIGHT SIDE PANEL
2.
Prepare two
short sheets
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.
31D
181
SNAP
T TE
i
31D
181
SNAP
T TE
i
3.
FAST001 x4
FAST001 x16
4.
INSIDE VIEW

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 12
LEFT SIDE PANEL
1x required
313
314
91D
54G 181
181
181
31D
31D
33A
89A
80L
89B
70D 70D
70D
80L
181
313
70D
70D
33A
80L
70D
89B
89A
80L
89A
80L
314
Small pan of 33A to this side
NOTE: Sheet 33A
must go behind jamb
89B.
x2
1.
ALL PARTS
FAST001 x20

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 13
2.
Prepare two
short sheets
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.
SNAP
T TE
i
SNAP
T TE
i
91D
54G
181
181
31D
31D
3.
FAST001 x8
INSIDE VIEW
FAST001 x22
4.
LEFT SIDE PANEL

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 14
DOOR PANEL ASSEMBLY
1x required
58A 58B
12A
37A
58M
SNAP
T TE
i
SNAP
T TE
i
58M
Narrow pan of sheet
to this side
20mm
Side channels of door
are to be orientated
opposite to top and
bottom channels.
Side channels are
positioned behind top
and bottom channel.
15mm
20mm flange
15mm flange
FAST006
FAST001 x12
FAST001 x4
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Position 12A
midway along the
door.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 15
91E
91E
37A
Using the jambs as templates
drill 3mm holes into the
sheet and secure with screws
from the outside of the
sheet.
Turn over the panel and fit
braces.
FAST001 x14
D
D
D D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 16
DOOR PANEL ASSEMBLY
Lay the LEFT SIDE PANEL
face up and lay the DOOR
PANEL down in the open
position on top as shown.
Using three rivets per hinge,
FAST009, secure the door to
the frame.
NOTE: Run the 3mm drill bit
through the punched holes
in the jamb before riveting
the hinge on.
FAST009 x6
D
D
D
D
D
D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 17
REAR PANEL ASSEMBLY
1x required
30A
30G
53C
81F
FAST001 x2
SNAP
T TE
i
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 18
FRONT PANEL
1.
3.
2.
53T
53T
70D
70D
53T
Prepare two
short sheets
70D
FAST001 x7
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 19
SNAP
T TE
i
SNAP
T TE
i
181
181
31D
31D
4. 5.
FAST001 x4
INSIDE VIEW
FAST001 x13

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A15301FKFD
1.52mW x 2.96mD x 1.80mH
Model: A15301FKFD 14/01/21 2.1 20
Side wall
channels
fit into the
notched
rear wall
channels. Position hasp centrally
over the padbolt shaft
and drill 3mm holes
and secure with screws.
NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel
are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
Mesh panels are not shown for
illustrative purposes.
PANEL CONSTRUCTION
D
D
FAST001 x2
FAST001 x4
FAST013 x4
FAST013 x4
FAST013 x4
Lap these
corner
sheets, drill
and screw
together