ABSCO SHEDS 60303WK User manual

CONCRETE SLAB
FRONT: 5.96m SIDE: 3.00m HEIGHT: 2.10m
6060mm
3100mm
Absco Industries
Workshop Shed Model: 60303WK
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017 PAGE 01
We thank you for choosing an Australian made
shed. For further assistance please visit our detailed
instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
of our instructions. Feedback makes us better.
[email protected]
CONCRETE
REBATED EDGE
BOTTOM CHANNEL
CONCRETE SLAB
75mm WIDE REBATE
100mm
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 02
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
·The site for the shed must be level. An uneven surface may result in misalignment of
parts.
·It is recommended that the shed be set on a 100mm concrete slab and anchored down
appropriately (refer to last page for details).
·Anchor sets are not supplied as standard items with this product as some customers
wish to use their own anchoring systems.
·Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
·Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
·Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
·Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
·It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
TOOLS OPTIONAL
10mm
(Steel)
10mm
(Masonary)

COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
MAIN PACK CARTON (PACK 1 OF 2)
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
2
2
16
1
STEEL SHEET
1915mm X 773mm 36L
STEEL SHEET
2045mm X 773mm 38L
STEEL SHEET
1546mm X 773mm 45A
STEEL SHEET
1785mm X 711mm 34A
2
2
1
1
15A
PEAK BRACE
STEEL SHEET
1785mm X 711mm 35A
STEEL SHEET
1725mm X 773mm A
STEEL SHEET
1725mm X 773mm B
1FITTINGS & ACCESSORIES
PACKET (SEE PAGE 4)
297AL
RIDGE
BEAM
L = 1521mm
STEEL SHEET
1785mm X 731mm 33A
2
297AR
RIDGE
BEAM
L = 1521mm
ZARSP
2RIDGE BEAM JOINER
L: 450mm (17.7")
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 03

2RBP
RIDGE
PLATES
FITTINGS & ACCESSORIES PACKET CONTENTS
3
2
12A
DOOR
STRAP
L: 165mm
14A
CAP GABLE
L: 170mm
CSJ
18 CHANNEL JOINER
L= 200mm (7.9")
PSTKSGL
SINGLE DOOR FITTINGS PACK
1
1PSTKSGL
DOUBLE DOOR FITTINGS PACK
DOOR
PADBOLT
HASP
1
1
SELF TAPPING SCREWS
PACKET CONTAINING 220
1
DOOR
PADBOLT
FAST006
3/16 COUNTERSUNK
SCREWS & NUTS
63.2 x 8mm
BLIND POP RIVETS
6
PSTKSGL - SINGLE DOOR FITTINGS PACK
PACK 6P - SCREW PACK 6
PACK 6P
SCREW PACK 6
1
PHILLIPS DRIVER BIT
3mm DRILL BIT
1 1
DRILL
FAST007
FAST038
DOOR
PADBOLT
HASP
2
3
SELF TAPPING SCREWS
PACKET CONTAINING 220
1
DOOR
PADBOLT
3/16 COUNTERSUNK
SCREWS & NUTS
12
3/16 ROUND HEAD
BOLTS & NYLOCK NUTS
83.2 x 8mm
BLIND POP RIVETS12
PSTKDBL - DOUBLE DOOR FITTINGS PACK
PACK12P - SCREW PACK 12
PACK12P
SCREW PACK 12
1
PHILLIPS DRIVER BIT
3mm DRILL BIT
1 1
DRILL FAST038
FAST007FAST006
198A
RIDGE CAP
JOINER
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
20 16mm TEK
SCREWS FAST014
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 04

2STEEL SHEET
2045mm X 773mm 38R
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
MAIN PACK CARTON (PACK 2 OF 2)
2
3
6
1
STEEL SHEET
1915mm X 773mm 36R STEEL SHEET
1785mm X 773mm 31A
PORTAL FRAME
FITTINGS PACK
(SEE BELOW)
COMPONENT
DESCRIPTION
PART
No. CHECK CHECK
QTY QTY
2
2
2
2
2
4
120
26
PORTAL FRAME ACCESSORIES
CHECK
C1482
COMPONENT
DESCRIPTION
PART
No.
C1704
CHANNEL L = 1482mm
40
80
CHANNEL L = 1704mm
40
80
KNEE PLATE
APEX PLATE
MULTI PURPOSE
BRACKET
DYNABOLT
16mm TEK
SCREWS
45mm TEK
SCREWS
1785mm X 773mm 30A
STEEL SHEET
1
60303WCP-(J)
CHANNELPACK
(SEE PGs 6 & 7)
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 05

MAIN PACK (PACK 2 OF 2) CHANNEL SET
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
55AL
CHANNEL
L = 1496.5mm
1
1
1
1
2
55CL
CHANNEL
L = 1496.5mm
55BL
CHANNEL
L = 1496.5mm
2
6
81BL
CHANNEL
L = 1496.5mm
81AL
CHANNEL
L = 1496.5mm
56AL
CHANNEL
L = 1496.5mm
56BL
CHANNEL
L = 1496.5mm
460AL
CHANNEL
L = 1496.5mm
55AR
CHANNEL
L = 1496.5mm
1
1
1
1
2
55CR
CHANNEL
L = 1496.5mm
55BR
CHANNEL
L = 1496.5mm
2
6
81BR
CHANNEL
L = 1496.5mm
81AR
CHANNEL
L = 1496.5mm
56AR
CHANNEL
L = 1496.5mm
56BR
CHANNEL
L = 1496.5mm
460AR
CHANNEL
L = 1496.5mm
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 06
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS

3
1
1
4
89A
JAMB L= 1785mm
90A
JAMB L= 1568mm
89C
JAMB L= 1725mm
87A
LIP TRIM L= 1546mm
2
1
1
6
58B
CHANNEL
L = 1725mm
2
58A
CHANNEL WITH HINGES
L = 1725mm
3
2
79A
CHANNEL
L = 1568mm
58C
CHANNEL
L = 773mm
MAIN PACK (PACK 2 OF 2) CHANNEL SET (CONT.)
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
CHANNEL
L = 1518mm
84L
79B
CHANNEL
L = 788mm
89B
JAMB L= 1785mm
1
90B
JAMB L= 788mm
91A
JAMB L= 1120mm
1
6
CHANNEL
L = 1518mm
84R
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 07
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 08
20mm
15mm
QTY = 10pcs.
CHANNEL
PUSH PUSH
CHANNEL
CSJ
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
CSJ
CSJ
HIGH-SIDE
CHANNEL
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ
= =
= =
==
==
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
=
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
FINISHED CHANNEL
=
NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
JOIN>> <<JOIN JOIN>>
JOIN>> SJ
JOIN>>
<<JOIN
JOIN>> <<JOIN
J
CSJ
DRILL 4 x 3mm (2 PER A SIDE)
HOLES TO SECURE SECTIONS
TOGETHER.
(THESE SCREWS MAY HAVE TO
BE TEMPORARILY REMOVED
AND REPLACED DURING LATER
ASSEMBLY)

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 09
=
=
=
=
=
=
4 X 60AR
2993mm (117.8")
STEP 1. PRE-ASSEMBLY OF SPLICED CHANNELS
6 x 81A
4 x 60A
1 x 55A
2 x 55B
1 x 55C
1 x 56A
NOTE: JOIN TOGETHER 36 X CHANNEL SECTIONS USING 18 X CHANNEL JOINERS (PART CSJ)
56AR
56AL
55CL
55CR
55BR
55BL
55AL
55AR
60AR
60AL
81AL
81AR
6 X 81AR
6 X 81AL
4 X 60AL
1 X 55AR
1 X 55AL
2 X 55BR
2 X 55BL
1 X 55CR
1 X 55CL
1 X 56AR
1 X 56AL
NOTE: SOME CHANNELS HAVE
HOLES IN THEM - YOU WILL NEED
TO RE-DRILL HOLES ON ANY
CHANNEL WHERE THE CSJ
JOINING CHANNEL COVERS
HOLES ON THE CHANNELS
YOU ARE CONNECTING
=
=
1 x 56B
2 x 81B
81BR
81BL
56BL 56BR
1 X 56BR
1 X 56BL
2 X 81BR
2 X 81BL

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 10
STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 50mm OVERLAP
OF THE RIDGE CAP
STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS.
MAKE SURE JOINER HAS 225mm IN EACH RIDGE CAP.
STAGE 3: TURN RIDGE CAP OVER AND MEASURE 250mm FROM THE END OF EACH RIDGE
CAP.
PLACE TEK SCREWS IN 50mm INCREMENTS FROM SAID END.
REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM
INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 11
PHILLIPS DRIVER BIT
QTY. = 1
QTY. = 8
QTY. = 2
QTY. = 1
SELF DRILLING TEK SCREW
PART ZARSP - 450mm LONG
ZARSP
RIDGE BEAM 1521mm
PARTS 97AL & 97AR
STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM
PUSH PUSH
97AL
97AR
16mm
200mm
250mm
2993mm OVERALL LENGTH
(PART 97A)
16mm
THE TOP SECTIONS OF
CAPPING WILL OVERLAP
EACH OTHER AT THE
JOIN BY 50mm.

87A
87A
81A
60A
60A
97A
14A
45A
45A
45A
45A
45A
45A
45A
45A
81A
98A
60A
60A
97A
87A
87A
14A
45A
45A
45A
45A
45A
45A
45A
45A
81A
81A
VIEW OF ROOF COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 12

22A
89A
91A
89A
91A
55C
84L
84R
15A
55B
81A
PF 90A
36R
38R
38L 36L
31A
31A
31A
30A
35A
34A
A
B
79A
55A
81B
81A
36L
38L
38R
36R 30A
33A
31A
31A
31A
33A
89A
89B
91A
56B
79B
84L
30A
55B
84R
56A
81B
15A
VIEW OF WALL COMPONENTS
B
90B
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 13

ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 14

DOUBLE
DOOR
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 15
DOOR PANEL ASSEMBLY
20mm
58C
58C
FOUR HOLE SET
FOR PADBOLT
CONNECTION
58C
12A
58C
58A
58A
15mm FLANGE
A
B
89C
58B
A
B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
ALL VERTICAL DOOR CHANNELS
ARE INSTALLED IN THE REVERSE
DIRECTION IN COMPARISON TO
HORIZONTAL DOOR CHANNELS
FLANGE

SINGLE
DOOR
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 16
20mm FLANGE
58C
58C
58A
15mm FLANGE
B
B
SNAP
T TE
i
SNAP
T TE
i
58B
12A
ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE
DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS

REAR PANEL ASSEMBLY
ONE REQUIRED
SNAP
T TE
i
SNAP
T TE
i
55B
81B
31A
31A
31A
30A
30A
31A
31A
31A
SHEET TYPE 30A
THIS END
ONE REQUIRED
SHEET TYPE 30A
THIS END
(2 Required)
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 17

INSIDE
OF
SHED
84R
84L
15A15A
81A
(2 Required)
SIDE PANEL ASSEMBLY
TRIM THE TIP OF EACH SHEET
OR BEND OUT OF THE WAY TO
ALLOW CHANNELS TO FIT HARD
UP TO THE EDGE OF THE
SHEET
36L
36R
38L
38R
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 18

45A
45A
45A
45A
SNAP
T TE
i
SNAP
T TE
i
60A
87A
81A
87A
NOTE: TWO ROOF
PANELS WILL HAVE
PART (87A) FITTED
TO THIS END ONLY.
NOTE: TWO ROOF
PANELS WILL HAVE
PART (87A) FITTED
TO THIS END ONLY.
2/PRE-PUNCHED
HOLES TO THIS
END OF EACH
SHEET WITH PART
No. 81A FITTED
(4 Required)
LARGE ROOF PANEL ASSEMBLY
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 19

FRONT PANEL ASSEMBLY
89B
89A
33A
33A
30A
56A
79B
56B
90B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SINGLE DOOR
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 60303WK 08-11-2017
Absco Industries
Workshop Shed Model: 60303WK
PAGE 20