ABSCO SHEDS REGENT 23221RK User manual

CONCRETE SLAB
PAGE 1
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
FRONT: 2.26m
SIDE: 2.18m
HEIGHT: 1.96m
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
[email protected]
2360mm
2280mm
Absco Regent Shed
Assembly Instructions
Model: 23221RK

PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
·The site for the shed must be level. An uneven surface may result in misalignment of
parts.
·It is recommended that the shed be set on a 100mm concrete slab and anchored down
appropriately (refer to last page for details).
·Anchor sets are not supplied as standard items with this product as some customers
wish to use their own anchoring systems.
·Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
·Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
·Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
·Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
·It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
Normal: 4mm & 10mm
Masonry: 10mm
OPTIONAL
SITE PREPARATION
Normal: 3mm

PAGE 3
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
1
1
2
2
3
2
2
6
1
1785mm X 773mm 30A
STEEL SHEET
STEEL SHEET
1785mm X 773mm 31A
STEEL SHEET
1785mm X 731mm 32A
STEEL SHEET
1725mm X 773mm B
58A
CHANNEL WITH HINGES
L = 1725mm
58B
CHANNEL
L = 1725mm
58C
CHANNEL
L = 773mm
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
STEEL SHEET
1170mm X 773mm 48L
2STEEL SHEET
1170mm X 773mm 48R
STEEL SHEET
1170mm X 773mm 49A
2
GABLE L/H
L=1105mm 17L
2
GABLE R/H
L=1105 17R
213B
BRACE
L: 350mm
179B
CHANNEL
L = 788mm

97BL
RIDGE
BEAM
L = 1152mm
1
PAGE 4
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
1
1
2
2
2
81HL
CHANNEL
L = 1089.5mm
176AL
CHANNEL
L = 1126.5mm
54CL
CHANNEL
L = 1126.5mm
176BL
CHANNEL
L = 1126.5mm
81DL
CHANNEL
L = 1126.5mm
59BL
CHANNEL
L = 1089.5mm
78BL
CHANNEL
L = 1126.5mm
97BR
RIDGE
BEAM
L = 1152mm
1
1
1
2
2
2
81HR
CHANNEL
L = 1089.5mm
176AR
CHANNEL
L = 1126.5mm
54CR
CHANNEL
L = 1126.5mm
176BR
CHANNEL
L = 1126.5mm
81DR
CHANNEL
L = 1126.5mm
59BR
CHANNEL
L = 1089.5mm
78BR
CHANNEL
L = 1126.5mm
CSJ
12 ZARSP
THESE COMPONENTS ARE TO BE
JOINED
TO THESE COMPONENTS
1
CHANNEL JOINER
L= 200mm (7.9")
RIDGE BEAM JOINER
L: 450mm (17.7")
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
281CL
CHANNEL
L = 1126.5mm
281CR
CHANNEL
L = 1126.5mm

PAGE 5
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
4
12A
1
DOOR
STRAP
L: 165mm
14A
2CAP GABLE
L: 170mm
6
4mm CSK SCREW &
NUT SECURE HINGES
TO DOOR
220 SELF TAPPING
SCREWS
1DOOR
PADBOLT 1
DOOR
PADBOLT
HASP
6
3mm POP RIVETS SECURE
HINGES TO DOOR
(ALTERNATIVE FIXING
METHOD)
1ASSEMBLY
INSTRUCTIONS
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
22A
21 89A
JAMB L= 1785mm
91A
JAMB L= 1120mm
90B
JAMB L= 788mm
1
89B
JAMB L= 1785mm
186B
LIP TRIM L= 1170mm
8
4
SELF DRILLING HEX
HEAD TEK SCREWS (NO
HOLE REQUIRED)
4mm (0.16") NUT &
BOLT SET SECURE
ONE PADBOLT TO
DOOR SHEET
3mm (0.12") DRILL BIT
HEX TEK SCREW
DRIVER BIT
1
1

20mm
15mm
QTY = 10pcs.
CHANNEL
(0.79")
(0.59")
PUSH PUSH
CHANNEL
CSJ
PAGE 6
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
CSJ
CSJ
HIGH-SIDE
CHANNEL
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ
= =
= =
==
=
=
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
=
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
FINISHED CHANNEL
=
NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
JOIN>> <<JOIN JOIN>>
JOIN>> SJ
JOIN>>
<<JOIN
JOIN>> <<JOIN
J
CSJ
DRILL 4mm (0.16") x 3mm (0.12")
(2 PER A SIDE) HOLES TO
SECURE SECTIONS TOGETHER.
(THESE SCREWS MAY HAVE TO
BE TEMPORARILY REMOVED
AND REPLACED DURING LATER
ASSEMBLY)
Absco Regent Shed -
Model: 23221RK

PAGE 7
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
=
=
=
=
=
=
2 X 78BR
2253mm (88.7")
STEP 1. PRE-ASSEMBLY OF SPLICED CHANNELS
1 x 81D
2 x 78B
1 x 54C
1 x 76A
2 x 59B
2 x 81H
NOTE: JOIN TOGETHER 24 X CHANNEL SECTIONS USING 12 X CHANNEL JOINERS (PART CSJ)
2179mm (85.8")
59BR
81HL
81HR
59BL
76AR
76AL
54CL
54CR
78BR
78BL
81DL
81DR
1 X 81DR
1 X 81DL
2 X 78BL
1 X 54CR
1 X 54CL
1 X 76AR
1 X 76AL
2 X 59BR
2 X 59BL
2 X 81HR
2 X 81HL
NOTE: SOME CHANNELS HAVE
HOLES IN THEM - YOU WILL NEED
TO RE-DRILL HOLES ON ANY
CHANNEL WHERE THE CSJ
JOINING CHANNEL COVERS
HOLES ON THE CHANNELS
YOU ARE CONNECTING
Absco Regent Shed -
Model: 23221RK
=1 x 76B
76BR
76BL
1 X 76BR
1 X 76BL
=
2 X 81CR
2 x 81C
81CR
81CL
2 X 81CL

PAGE 8
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 50mm OVERLAP
OF THE RIDGE CAP
STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS.
MAKE SURE JOINER HAS 225mm IN EACH RIDGE CAP.
STAGE 3: TURN RIDGE CAP OVER AND MEASURE 250mm FROM THE END OF EACH RIDGE CAP.
PLACE TEK SCREWS IN 50mm INCREMENTS FROM SAID END.
REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM
INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM
Absco Regent Shed -
Model: 23221RK

PAGE 9
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
TEK SCREW DRIVER BIT
QTY. = 1
QTY. = 8
QTY. = 2
QTY. = 1
SELF DRILLING TEK SCREW
PART ZARSP - 450mm (17.7") LONG
ZARSP
RIDGE BEAM 1152mm (45.4")
PARTS 97BL & 97BR
STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM
PUSH PUSH
97BL
97BR
16mm
(0.63")
200mm
(7.9")
250mm
(9.8")
2253mm (88.7") OVERALL LENGTH
(PART 97B)
16mm
(0.63")
THE TOP SECTIONS OF
CAPPING WILL OVERLAP
EACH OTHER AT THE
JOIN BY 50mm (2.0").
Absco Regent Shed -
Model: 23221RK

Absco Regent Shed - Model: 23221RK
VIEW OF ROOF COMPONENTS
NO. PAGE 10
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
78B
48L
49A
48R
49A
48R
81C
86B
86B
81C
86B
14A
86B
97B
48L

VIEW OF WALL COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
PAGE 11
32A
31A
32A
32A
32A
32A
31A
13B
32A
30A
13B
31A
30A
B
59B
17R
76A
59B 76B
17R
17L
81D
81H
54C
79B
89B
89A
90B
17L
81H
91A
22A

PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D

PAGE 13
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
DOOR PANEL ASSEMBLY6. DOOR PANEL ASSEMBLY
20mm FLANGE
58C
58C
58A
15mm FLANGE
B
B
SNAP
T TE
i
SNAP
T TE
i
58B
12A
ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE
DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS

REAR PANEL ASSEMBLY
(2 Required)
PAGE 14
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
32A
31A 32A
SMALL PAN
SMALL PAN
59B
81H
SNAP
T TE
i
SNAP
T TE
i
SIDE PANEL ASSEMBLY
30A
31A
30A
76B
81D
SNAP
T TE
i
SNAP
T TE
i

PAGE 15
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
2 x PRE-PUNCHED
HOLES TO THIS
END OF EACH
SHEET WITH PART
NO. 81C FITTED
ROOF PANEL ASSEMBLY
(2 Required)
SNAP
T TE
i
SNAP
T TE
i
48L
49A
48R
86B
81C
86B
78B

PAGE 16
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
FRONT PANEL ASSEMBLY
89B
89A
32A
32A
76A
79B
54C
90B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i

PAGE 17
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
91A
91A
B
B

PANEL CONSTRUCTION
PAGE 18
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
Note: Take care to ensure that all wall panels
are not positioned upside down. The top
channel of each panel is pre-punched for
attaching to roof sheets or gable sections.
The bottom channels are not pre-punched.
SIDE WALL PANEL CHANNELS FIT
INTO THE NOTCHED FRONT AND
REAR WALL PANEL CHANNELS CHANNEL TYPE
78B THIS END
CHANNEL TYPE
81C THIS END
97B

ROOF CONSTRUCTION
PAGE 19
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
Absco Regent Shed -
Model: 23221RK
37mm
SECURE RIDGE BEAM TO
GABLE SECTIONS WITH
TWO SCREWS AT EACH
END. SECURE EACH ROOF
PANEL WITH ONE SCREW
IN EACH CORNER ONLY
AT THIS STAGE
ROOR OVERHANGS
ALL WALL PANELS
BY 37mm
OUTSIDE VIEW INSIDE VIEW
AFTER ATTACHING BOTH ROOF
PANELS TO WALLS AS SHOWN
ABOVE, FIT ONE REGENT BRACE
TO THE RIDGE BEAM AND FRONT
WALL AS SHOWN. YOU WILL HAVE
TO REMOVE AND REPLACE
EXISTING SCREWS AT FIXING
LOCATIONS. REPEAT THIS
PROCEDURE FOR THE REAR
WALL REGENT BRACE
INSIDE VIEW
13B

DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
FINAL CONSTRUCTION
PAGE 20
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23221RK 24/03/17
14A
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm HOLE INTO
THE WALL SHEET
- DRILL A 10mm HOLE INTO THE
CONCRETE
ANCHORING OF SHED
Absco Regent Shed -
Model: 23221RK
LOCATION OF 12
CONCRETE ANCHORS
BEND THE TOP AND BOTTOM
FLANGES AS SHOWN, THEN HOOK
THE BOTTOM FLANGES UNDER
THE ROOF END FLASHINGS (PART
87B) AND SCREW THE TOP
FLANGES AS SHOWN FOR BOTH
GABLE CAPS