ABSCO SHEDS J30082SK User manual

CONCRETE SLAB
PAGE 1
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Assembly Instructions
Model: J30082SK
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
[email protected]
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
3100mm
880mm
FRONT BASE
LENGTH: 3.0m
SIDE BASE
LENGTH: 0.78m
FRONT WALL
HEIGHT: 1.8m
REAR WALL
HEIGHT: 1.95m

PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
·Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
·Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
·It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
Normal: 4mm & 10mm
OPTIONAL
SITE PREPARATION
Masonry: 10mm
·The site for the shed must be level. An uneven surface may result in misalignment of
parts.
·It is recommended that the shed be set on a 100mm concrete slab and anchored down
appropriately (refer to last page for details).
·Anchor sets are not supplied as standard items with this product as some customers
wish to use their own anchoring systems.
·Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
·Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.

COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY
55AL
55CL
55BL
81BL
81AL
CSJ
QTY
55CR
1
1
1
1
2
6
THESE COMPONENTS ARE TO BE
JOINED
TO THESE COMPONENTS
1
1
1
1
2
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL JOINER
L= 200mm (7.9")
55BR
81BR
81AR
55AR
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
CHANNEL
L = 1496.5mm (58.9")
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 3
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK

PAGE 4
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
2
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
2
1915 X 773mm 43B
STEEL SHEET
2
1
1
4
2
1
1
1915 X 773mm 43C
STEEL SHEET
STEEL SHEET
1915mm X 773mm X4L
STEEL SHEET
1915mm X 773mm X4R
STEEL SHEET
865mm X 773mm 43D
STEEL SHEET
1785mm X 711mm 34A
STEEL SHEET
1725mm X 773mm A
STEEL SHEET
1725mm X 773mm B
2
2
1
61B
CHANNEL
L = 786mm
CHANNEL
L = 773mm
81J
79A
CHANNEL
L = 1568mm
1
4
89A
JAMB L= 1785mm
2
58A
CHANNEL WITH HINGES
L = 1725mm
58B
CHANNEL
L = 1725mm
58C
CHANNEL
L = 773mm
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS

PAGE 5
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
12
4mm CSK SCREW &
NUT SECURE HINGES
TO DOOR
8
4mm NUT & BOLT SET
SECURE TWO
PADBOLTS TO DOOR
SHEET
220 SELF TAPPING
SCREWS 3DOOR
PADBOLT
2
DOOR
PADBOLT
HASP
12
3mm POP RIVETS SECURE
HINGES TO DOOR
(ALTERNATIVE FIXING
METHOD)
1ASSEMBLY
INSTRUCTIONS
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT
DESCRIPTION
PART
No. CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
12A
2
DOOR
STRAP
L: 165mm
22A
1
1
4
2
89C
JAMB L= 1725mm
90A
JAMB L= 1568mm
91A
JAMB L= 1120mm
88B
LIP TRIM L= 865mm

CSJ
HIGH-SIDE
20mm
15mm
QTY = 6 pcs.
CHANNEL
CHANNEL
PUSH PUSH
CHANNEL
CSJ
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
CSJ
= =
= =
==
=
=
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
=
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
FINISHED CHANNEL
=
NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
JOIN>> <<JOIN JOIN>>
JOIN>> SJ
JOIN>>
<<JOIN
JOIN>> <<JOIN
J
CSJ
PAGE 6
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
DRILL 4 x 3mm (2 PER A SIDE)
HOLES TO SECURE SECTIONS
TOGETHER. (THESE SCREWS
MAY HAVE TO BE TEMPORARILY
REMOVED AND REPLACED
DURING LATER ASSEMBLY)

=
=
=
=
=
2993mm
STEP 1. PRE-ASSEMBLY OF SPLICED CHANNELS
2 x 81A
1 x 55A
1 x 55C
1 x 55B
1 x 81B
NOTE: JOIN TOGETHER 20 X CHANNEL SECTIONS USING 10 X CHANNEL JOINERS (PART CSJ)
81BL
81BR
55BR
55BL
55CL
55CR
55AR
55AL
81AR
81AL
2 X 81AR
2 X 81AL
1 X 55AR
1 X 55AL
1 X 55CR
1 X 55CL
1 X 55BR
1 X 55BL
1 X 81BR
1 X 81BL
PAGE 7
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
NOTE: SOME CHANNELS HAVE
HOLES IN THEM - YOU WILL NEED
TO RE-DRILL HOLES ON ANY
CHANNEL WHERE THE CSJ
JOINING CHANNEL COVERS
HOLES ON THE CHANNELS
YOU ARE CONNECTING

Absco Space Saver Shed - Model: J30082SK
VIEW OF ROOF COMPONENTS
PAGE 8
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
88B
81A
88B
81A
43D
43D
43D
43D

VIEW OF WALL COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
PAGE 9
43B
43C
43C
43B
34A
X4L
34A
X4R
A
B
22A
55C
91A
90A
91A
89A
89A
79A
55A
61B
81J
81B
55B
61B
81J

PAGE 10
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D

PAGE 11
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
DOOR PANEL ASSEMBLYDOOR PANEL ASSEMBLY
20mm
58C
58C
FOUR HOLE SET
FOR PADBOLT
CONNECTION
58C
12A
58C
58A
58A
15mm FLANGE
A
B
89C
58B
A
B
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
ALL VERTICAL DOOR CHANNELS
ARE INSTALLED IN THE REVERSE
DIRECTION IN COMPARISON TO
HORIZONTAL DOOR CHANNELS
FLANGE

REAR PANEL ASSEMBLY
PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
43B
43C
43C
43B
SNAP
T TE
i
SNAP
T TE
i
55B
81B

PAGE 13
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
SIDE PANEL ASSEMBLY
(TWO REQUIRED)
X4L
X4R
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
61B
81J

ROOF PANEL ASSEMBLY
PAGE 14
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
43D
43D
43D
43D
SNAP
T TE
i
81A
88B
81A
88B

FRONT PANEL ASSEMBLY
PAGE 15
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
89A
89A
55A
90A
79A
55C
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
34A
34A

DOOR PANEL ASSEMBLY
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: Nuts and bolts (supplied) may be used instead of
pop rivets (supplied) by simply enlarging the hinge hole
sets in the jamb using a 4mm drill bit
PAGE 16
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
91A
91A
A
B
Absco Space Saver Shed
Model: J30082SK

PAGE 17
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
PANEL CONSTRUCTION
NOTE: Take care to ensure that both front
and rear wall panels are not positioned
upside down. The top channel of each
panel is pre-punched for attaching roof
sheets. The base channels are not
pre-punched.
SIDE WALL PANEL CHANNELS FIT
INTO THE NOTCHED FRONT AND
REAR WALL PANEL CHANNELS

FINAL CONSTRUCTION
ANCHORING OF SHED
LOCATION OF 8
CONCRETE ANCHORS
PAGE 18
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
Absco Space Saver Shed
Model: J30082SK
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm HOLE INTO THE WALL SHEET
- DRILL A 10mm HOLE INTO THE CONCRETE