ABSCO SHEDS Space Saver 23081SK User manual

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 1
Download the Absco
Sheds Assembly App
for instructional videos
MANUFACTURED
IN AUSTRALIA
SNAPTiTE
Assembly
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL SHED MODEL: 23151GK 21-11-2017
CONCRETE SLAB
2360mm
1620mm
FRONT: 2.26m
SIDE: 1.52m
HEIGHT: 1.95m
We thank you for choosing an Australian made
shed. For further assistance please visit our detailed
instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
of our instructions. Feedback makes us better.
[email protected]
CONCRETE
REBATED EDGE
BOTTOM CHANNEL
CONCRETE SLAB
75mm WIDE REBATE
100mm
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
Absco Industries
Premier Shed Model: 23151GK
PAGE 01
When laying concrete slab, ensure there
is a rebated edge 25mm deep around the
perimeter. This will help water egress from
the base of the shed.
AU: 1800 029 701
NZ: 0800 466 444
[email protected]
www.abscosheds.com.au
CONCRETE SLAB
2360mm
880mm

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 2
GENERAL INSTRUCTIONS
• Before commencing any assembly, read through these instructions in detail to gain a thorough
understanding of assembly methods and associated details.
• Unpack the carton and carefully identify and check off all the parts against the parts described
and illustrated on "COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An uneven surface may result in misalignment of parts.
• The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately
illustrated on “FINAL CONSTRUCTION” page.
TOOLS REQUIRED
SAFETY NOTES
• Some parts may have sharp edges. It is advisable to wear gloves when handling these items and
safety glasses if drilling holes. Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored to a solid foundation immediately after construction is
completed.
• It is highly recommended to erect the shed with two or more people.
RECOMMENDED
3mm drill bit 10mm drill bits metal & masonry

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 3
COMPONENT PACKING LIST
Check off all components.
2
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY QTY
1
1915 X 773mm 43B
STEEL SHEET
1
1
1
3
2
1
1915 X 773mm 43C
STEEL SHEET
STEEL SHEET
1915mm X 773mm X4L
STEEL SHEET
1915mm X 773mm X4R
STEEL SHEET
865mm X 773mm 43D
STEEL SHEET
1725mm X 773mm B
2
2
1
61B
CHANNEL
L = 786mm
CHANNEL
L = 773mm
81J
1
2
89A
JAMB L= 1785mm
1
1
58A
CHANNEL WITH HINGES
L = 1725mm
58B
CHANNEL
L = 1725mm
58C
CHANNEL
L = 773mm
STEEL SHEET
1785mm X 731mm 32A
79B
CHANNEL
L = 788mm
89B
JAMB L= 1785mm
1
90B
JAMB L= 788mm

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 4
COMPONENT PACKING LIST
Check off all components.
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY
54AL
54CL
54BL
81DL
81CL
QTY
54CR
1
1
1
1
2
1
1
1
1
2
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
54BR
81DR
81CR
54AR
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm
CHANNEL
L = 1126.5mm

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 5
COMPONENT
DESCRIPTION
PART
No. CHECK COMPONENT DESCRIPTION
PART
No. CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
22 91A
JAMB L= 1120mm
88B
LIP TRIM L= 865mm
1ASSEMBLY
INSTRUCTIONS 12A
1
DOOR
STRAP
L: 165mm
CSJ
6CHANNEL JOINER
L= 200mm
1PSTKSGL
SINGLE DOOR
FITTINGS PACK
DOOR
PADBOLT
HASP
1
1
SELF TAPPING SCREWS
PACKET CONTAINING 220
1
DOOR
PADBOLT
FAST006
3/16 COUNTERSUNK
SCREWS & NUTS
63.2 x 8mm
BLIND POP RIVETS
6
PSTKSGL - SINGLE DOOR FITTINGS PACK
PACK 6P - SCREW PACK 6
PACK 6P
SCREW PACK 6
1
PHILLIPS DRIVER BIT
3mm DRILL BIT
11 DRILL
FAST007
FAST038
SIDE PANEL ASSEMBLY
Check off all components.

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 6
SNAPTiTE ASSEMBLY GUIDE
The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for
tools and fasteners.
To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.
Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along
the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off
from the side.
Channel locks the shed panel into
position without the need for screws!
FASTENING SYMBOLS
Secure channel to sheeting by SNAPTiTE
fastening method.
Join components together with one
screw at this location only, as some
channels have extra holes that are not
required for this model of shed.
Do not join components together at
this location yet, as the screws may
obstruct further assembly of the other
components.
Join components together by pre-drill-
ing the holes first. Use one component as
template to mark where the holes are and
drill with a 3mm drill bit.
3mm pop rivet
4mm nut and bolt set.
D
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 7
Guide on Joining Spliced Channels
The text marked on all parts must be shown on the same side as each other
Step 1.
Position the channels and the
CSJ joiner so the centre of
the CSJ is in line with the end
of each channel to be joiner
together.
Step 2.
Join the first channel to the CSJ
by inserting the centre of the
CSJ, on an angle, to the end of
the channel where the JOIN>>
text is marked.
Push down one side of the CSJ
until you hear a ‘click’.
Step 3.
Join the second channel to the
CSJ by positioning the <<JOIN
of the channel at the centre of
the CSJ, on an angle. Push the
CSJ into the channel until you
hear a ‘click’.
Finished Channel.
The joined channels should
now look like the picture with
the CSJ positioned equally
inside of the joined channels.
Drill out holes with 3mm drill
bit in CSJ to match the holes
in channel. Drilling of screws
on the joined channels is being
done after sheets are locked on
the spliced channels.
= =
JOIN>> <<JOIN
CSJ
==
JOIN>>
J
==
JOIN>> SJ
= =
JOIN>>
<<JOIN
= =
JOIN>> <<JOIN
Finished Spliced
Channel
Channel
Push
20mm 15mm
CSJ
.
...
CSJ
HIGH-SIDE
CHANNEL
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 8
=
=
=
=
=
2253mm
2 x 81C
1 x 54A
1 x 54C
1 x 54B
1 x 81D
81DL
81DR
54BR
54BL
54CL
54CR
54AR
54AL
81CR
81CL
2 X 81CR
2 X 81CL
1 X 54AR
1 X 54AL
1 X 54CR
1 X 54CL
1 X 54BR
1 X 54BL
1 X 81DR
1 X 81DL
NOTE: SOME CHANNELS HAVE
HOLES IN THEM - YOU WILL NEED
TO RE-DRILL HOLES ON ANY
CHANNEL WHERE THE CSJ
JOINING CHANNEL COVERS
HOLES ON THE CHANNELS
YOU ARE CONNECTING
SIDE PANEL ASSEMBLY
Check off all components.
Note: Join together 12x Channel sections using 6x channel joiners (CSJ)

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 9
ROOF COMPONENT OVERVIEW
ROOF COMPONENT OVERVIEW
43D
43D
43D
81C
88B
81C
88B

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 10
WALL COMPONENT OVERVIEW
X4R 32A
32A
43B
43C
43B X4L
B
81J
61B
54B
61B
81J
54C
79B
22A
54A
90B
91A
89B
89A
81D
WALL COMPONENT OVERVIEW

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 11
REAR PANEL ASSEMBLY
1x required
43B
43C
43B
SNAP
T TE
i
SNAP
T TE
i
54B
81D

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 12
SIDE PANEL ASSEMBLY
2x required.
X4L
X4R
SNAP
T
TE
i
SNAP
T
TE
i
SNAP
T
TE
i
SNAP
T
TE
i
61B
81J

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 13
ROOF PANEL ASSEMBLY
43D
43D
43D
SNAP
T TE
i
SNAP
T TE
i
81C
88B
81C
88B

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 14
FRONT PANEL ASSEMBLY
89B
89A
32A
32A
54A
79B
54C
90B
SNAP
T TE
i
SNAP
T
TE
i
SNAP
T TE
i
SNAP
T
TE
i

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 15
DOOR PANEL ASSEMBLY
Vertical door channels are
installed in the opposite
orientation compared to the
horizontal door channels.
Short flange
of channel
Long
flange of
channel
SINGLE DOOR
58C
58C
SNAP
T
TE
i
SNAP
T TE
i
12A
B
B
58B
58A

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 16
DOOR PANEL ASSEMBLY (continued)
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
91A
91A
B
B

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 17
PANEL CONSTRUCTION
NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel
are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
SIDE WALL PANEL CHANNELS FIT
INTO THE NOTCHED FRONT AND
REAR WALL PANEL CHANNELS

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 18
FINAL CONSTRUCTION
Each anchor consists of one nut, bolt, M10
dynabolt and steel angle.
Drill a 10mm hole into the wall sheet.
Drill a 10mm hole into the concrete.
Bolt and Nut*
M10 4.6/S
Steel Angle*
35 x 35 x 3
M10 Dynabolt*
* Denotes hot dip galvanised finish
Wall Sheet
Slab
Location of 8
concrete anchors
ANCHORING OF SHED

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 19
Absco Skillion Roof Shed Notes
• 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifications and
written instructions provided by Absco and/or their representatives.
• 2.G The drawings provided herein are for installation and structural engineering purposes only. If discrepancies
are discovered within the documentation provided, these shall be brought to the attention of Absco and
written approvals obtained prior to commencing the affected section of work.
• 3.G If in doubt ask.
• 4.G Until approvals from the local authorities are obtained, commencement of construction from these
drawings shall not commence.
• 5.G Unless varied by the project specification, all materials and workmanship shall be undertaken in
accordance with the relevant Australian standards and the by-laws and ordinances of the relevant building
authorities.
• 6.G All dimensions indicated in these drawings shall be verified on site by the installation contractor. Scaling
of drawings shall not be undertaken.
• 7.G Prior to commencing works on site, the contractor shall verify the position of all services in the area to
ensure that the construction does not interfere with any of those services.
• 8.G During installation on site the shed structures shall be maintained in a stable condition with no part
becoming overstressed or permanently deformed.
• 9.G In circumstances where the shed has been installed in a manner which is inconsistent with the installation
manual, structural certification shall be void.
• 10.G The structural components detailed within this installation manual have been designed for the following
loads in accordance with AS/NZS1170 based on a Class 10a, Type 2 structure:
• Roof Live Load: 0.25 kPa uniformly distributed or 1.1 kN concentrated as per AS/NZS1170.1
• Wind Load: Classification N2, Non-Cyclonic to AS4055 where Vu = 40 m/s, Vs = 26 m/s
Windward wall Cpe = 0.7
Leeward Wall Cp,e = -0.3 to -0.5 as applicable based on shed geometry
Side Wall Cp,e = -0.5 to -0.65 as applicable based on shed geometry
Roof Cp,e = -0.5 to -1.3 depending on wind direction
6-12 Activity St, Acacia Ridge QLD 4110
PO Box 119, Acacia Ridge QLD 4110
AU: 1800 029 701
NZ: 0800 466 444
[email protected]
www.abscosheds.com.au
General

Absco Industries Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 23081SK
2.26mW x 0.78mD x 1.80mH, 1.95mH
Model: 23081SK 11/11/19 1.1 20
Absco Skillion Roof Shed Notes
• 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312-
2002.
• 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed
sections (including roof and wall sheeting) and Grade 250 for angle sections.
• 3.S All roof, and wall sheeting shall be minimum base metal thickness of 0.3mm
• 4.S All snaptite channels and jambs shall be minimum base metal thickness of 0.42mm
• 5.S All top hats shall be minimum base metal thickness of 1.0mm
• 6.S All screw fasteners shall be Phil Pan Head Zinc Plated #8 x 3/4” (STP0820)
• 7.S All bolt fasteners for anchoring shall be M10 minimum grade 4.6/S
• 8.S Installation of screw fasteners shall generally be undertaken in accordance with the relevant provisions
of AS1562.
Steelwork
• 1.F The supporting slab foundation for the garden shed shall be of a minimum size indicated on the installation
manual. The top surface of the formed slab shall be level and free of any irregularities which would inhibit
the installation of the shed.
• 2.F The structural engineering design for the supporting slab foundation shall be undertaken by a suitably
qualified structural engineer. The design shall consider all relevent provision of AS3600 and AS2870.
• 3.F Between adjacent footings or excavations, the contractor installing the slab foundation shall not exceed
a rise of 1 in a run of 2 in line of slope.
• 4.F Unless approved in writing by the slab foundation engineer, the limits of excavations near existing
footings shall be in accordance with that indicated below.
Supporting Slab and Foundations
The contactor shall undertake investigatory
localised excavations near existing
footings to ascertain their depth prior to
excavating adjacent to them. It is noted that
excavating to a depth below that indicated
above shall not be undertaken without
the written approval from the engineer.