ACN IRIS 3000 User manual

2.B. Installation without Router
1. Connect the handset to the connection point located on the side of your
ACN Videophone.
2. Unplug the existing Ethernet cable from your computer that connects
your Cable/DSL modem to your computer. The other end of this cable
should stay attached to your modem. Connect the Ethernet cable
that you unplugged from your computer to the WAN port of your ACN
Videophone.
3. Connect one end of the new Ethernet cable (RJ-45) that came with your
Videophone, to the LAN port of the phone. Connect the other end to the
Ethernet port of your computer.
4. Connect the power adapter to the power port and then plug it into an
electrical outlet.
Note: Do not use Power Adapters from other devices.
5. Turn the Power Switch to ON on your ACN Videophone.
6. You will see a status line on your screen as your phone goes through
setup. Once this is complete, the register light on the front of your
phone will turn green, and it is ready for use.
Note: Simultaneous use of the computer and the Videophone will affect
the quality of the connection.
If you do not have a computer simply connect your ACN Videophone to
your modem or router as described in step 2.
Changing the Display Language
After connecting your ACN Videophone for the first time you may want to change the
language setting for the display. You can select your preferred display language by
following these easy steps:
3. Optional: Connecting existing/additional
phone(s) to your ACN Videophone
Connecting additional phones to your ACN Videophone
Connect one end of a phone cord to the phone port on your ACN Videophone. The
other end of the cord can connect to another phone. If you connect to a cordless
phone you can use your ACN Digital Phone Service anywhere in your home.
2.A. Installation with Router (requires Router with free port)
1. Connect the handset to the connection point located on the side of your
ACN Videophone.
2. Connect one end of the Ethernet cable (RJ-45) to the WAN port of your
ACN Videophone. Connect the other end to an open Ethernet port on
your router.
3. Ensure that your computer is connected to another port on your router
or via an existing Wireless (WIFI) connection
4. Connect the Power Adapter to the Power port and then plug it into an
electrical outlet.
Note: Do not use Power Adapters from other devices.
5. Turn the Power Switch to ON on your ACN Videophone.
6. You will see a status line on your screen as your phone goes through
setup. Once this is complete, the register light on the front of your phone
will turn green, and it is ready for use.
Note: Simultaneous use of the computer and the Videophone will affect
the quality of the connection.
If you do not have a computer simply connect your ACN Videophone to
your modem or router as described in step 2.
3. Select ‘Display’ and scroll down to
‘Language’.
4. Select one of the language options.
1. Press MENU and select ‘Settings’. 2. Select ‘System Settings’.
Videophone
Quick Installation Guide
Customer Services 0203 147 48 87 (Mon - Fri, 07:30-18:00) - [email protected] - www.myacn.eu
UK-DPS-Refguide-003
1. Check for Required Items
You should already have these components: Router/Cable or DSL Modem High Speed Internet access
All of the following items should be included with your ACN Videophone.
If an item is missing, please contact ACN Digital Phone Service Technical Support.
Main Unit Handset
Power Adapter
(with country specific mains adapter,
where applicable)
Ethernet Cable
(RJ-45)
Telephone Cable
(RJ-11)
Set-Up Diagram
Phone
Socket
Cable or DSL
Modem
Computer
Video
Phone
1
2
3
Set-Up Diagram
Phone
Socket
Cable or DSL
Modem
Router
Computer
Video
Phone
1
2
3

1 Register The green LED light is on when your
Videophone is connected to ACN’s
Digital Phone Service.
2 Power Indicates if your Videophone is
switched on.
3 Mail Allows you to retrieve video/voicemail.
4 Hold Enables you to place calls on hold.
5 Mute Disables the voice transmission during
the call.
6 Phonebook Provides access to your personal
phonebook.
7 Conference Allows you to audio conference
multiple callers on to one call (3-Way
Calling).
8 Privacy Temporarily disables the video signal
transmission during a call.
9 * Enters “*”
10 Numeric
Keypad
Enters phone number in the dialling
mode or letters in the “Settings”
menu.
11 # Enters “#”.
Rejects the incoming call.
12 Menu Activates the “Main” menu on your
LCD screen.
13 Back Moves to the previous menu from the
“Settings” menu or “Set Up” menu
during a call and deletes characters
when entering information.
I/O (On/off) Turns your videophone on/off
+12V DC Power Connects to the power adapter
Usb USB port used to transfer data to/from your Videophone
Lan Local Area Nework connection
Wan Connects to Internet via the Ethernet cable
Phone Connects a cordless or corded phone to your Videophone
Video out Transmits video to a TV or Computer
Audio out Transmits audio to external speakers or audio system
Making a Call
Making a call with the Videophone is
simple. Whether you are making a voice
or video call, pick up the handset, dial the
number and press the ‘Call’ button. To
keep your image from being displayed to
the other party when making a video call
press the ‘Privacy’ button.
Front
14 My
Content
Lists available content.
15 Up Up navigation button.
16 OK Use to enter selections and save
settings in the “Settings” menu.
17 Down Down navigation button.
18 Left
Navigation
Left navigation button.
19 Right
Navigation
Right navigation button.
20 Status Lists information needed for
technical support i.e. configuration
and software version
21 Caps Allows you to enter capital letters
and selects the type of letters or
characters to enter.
Switches between numeric, lower-
case letters and upper-case letters.
22 My
Applications
Lists available applications.
23 Redial Makes a call to the last number
dialled.
24 Speaker Activates/deactivates the
speakerphone.
25 Call Makes a call to the dialled number.
Voicemail Set-up &
Access
1. Press the ‘Mail’ button.
The first time you access your
mailbox enter 1234, after
which you can define your
4-digit access code. Follow the
voice prompts to set-up your
mailbox.
2. To retrieve your message(s)
press ‘1’ after accessing your
mailbox.
3. For more information, and how
to record video greetings and
send videomail, refer
to the Video Greeting &
Video/Voicemail Guide in the
Customer Services section of
www.myacn.eu.
Phonebook & Advanced
Features
For information on using the phonebook
and advanced features, such as Digital
Photo Frame and Video & Audio Output
(connecting your Videophone to an LCD
screen and external speakers), refer
to the User Manual in the Customer
Services section of www.myacn.eu.
Rear
Videophone
Quick Installation Guide
Customer Services 0203 147 48 87 (Mon - Fri, 07:30-18:00) - [email protected] - www.myacn.euCustomer Services 0203 147 48 87 (Mon - Fri, 07:30-18:00) - [email protected] - www.myacn.eu
1:@/ 2ABC 3DEF
4GHI 5JKL 6MNO
7
PQRS
8TUV
9WXYZ
*0-._ # .
MAIL
REDIAL
STATUS
CALL
MY CONTENT
SPEAKER
CONFERENCE
PHONEBOOK
MY APPLICATION
MENU
MUTE/PRIVACY
BACK
HOLD
OK
1:@/ 2ABC 3DEF
4GHI 5JKL 6MNO
7
PQRS
8TUV
9WXYZ
*0-._ # .
REGISTER POWER
DELETE
CAPS
REGISTER POWER
I/O +12V DC
POWER
USB LAN WAN LINE PHONE VIDEO OUT AUDIO OUT