Acrosser Technology ACM-XD15B7 User manual

ACM-XD15B7
User Manual
Acrosser Technology Co., Ltd.
www.acrosser.com
ACM-XD15B7
COM Express 3.0 Basic Size Type 7
with Intel
®
Xeon
®
D SoC

ACM-XD15B7
2Acrosser Technology Co., Ltd.
Disclaimer
For the purpose of improving reliability, design and function, the information in
this document is subject to change without prior notice and does not represent a
commitment on the part of Acrosser Technology Co., Ltd.
In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use the
product or documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of Acrosser Technology
Co., Ltd.
Trademarks
The product names appear in this manual are for identication purpose only. The
trademarks and product names or brand names appear in this manual are the
property of their respective owners.
Purpose
This document is intended to provide the information about the features and use of
the product.
Audience
The intended audiences are technical personnel, not for general audiences.
To read this User Manual on your smart phone, you will have to install an
APP that can read PDF le format rst. Please nd the APP you prefer from
the APP Market.
Ver: 100-001
Date: Dec. 30, 2019

ACM-XD15B7
3
www.acrosser.com
Table of Contents
1. Introduction ...................................................................5
1.1. Specications ............................................................................................................. 6
1.2. Packing List ................................................................................................................ 7
1.3. Block Diagram ............................................................................................................ 8
2. Hardware Information ...................................................9
2.1. Mainboard Layout....................................................................................................... 9
2.2. Connector Pin Denition........................................................................................... 10
2.2.1. CN1, CN2 Pin Assignments .......................................................................... 10
2.3. Board Dimension...................................................................................................... 14
3. BIOS Settings...............................................................15
3.1. Main Setup ............................................................................................................... 15
3.2. Advanced Setup ....................................................................................................... 16
3.2.1. Serial Port Console Redirection .................................................................... 17
3.3. Chipset Setup........................................................................................................... 18
3.3.1. PCH SATA Conguration............................................................................... 18
3.4. Boot Setup................................................................................................................ 19
3.5. Security Setup .......................................................................................................... 19
3.6. Save & Exit Setup..................................................................................................... 20
4. Software Installation and Programming Guide...........21
4.1. Introduction............................................................................................................... 21
4.1.1. Environment .................................................................................................. 21
4.1.2. GPIO and Watchdog ..................................................................................... 21
4.2. API List and Descriptions ......................................................................................... 21
4.2.1. General ......................................................................................................... 21
4.2.2. GPIO ............................................................................................................. 22
4.2.3. Watchdog ...................................................................................................... 22
5. FAQ ...............................................................................24
Q 1. Where can I nd the serial number of this product?................................................. 24

ACM-XD15B7
4Acrosser Technology Co., Ltd.
This page intentionally left blank.

ACM-XD15B7
5
www.acrosser.com
1. Introduction
COM Express Concept
COM Express is an open industry standard dened specically for COMs (Computer-
on-Modules). Its creation provides the ability to transfer from legacy interfaces to the
newest technologies available today.
COM Express modules are available in three form factors:
• COM Express Extended Module: 155mm x 110mm
• COM Express Basic Module: 125mm x 95mm
• COM Express Compact Module: 95mm x 95mm
Type 7 COM Express Basic Module
Type 7 COM Express Basic Module (Enhanced Version)
An Added Surge Protection Circuit
An Added CPLD Control Circuit
Pulled Up the 3.3V, 5V & 12V’s Capacitance value for Enhancing
Endurance
The ACM-XD15B7 utilizes the Type 7 COM Express Basic Module that fully
complies with the PICMG (PCI Industrial Computer Manufacturers Group), COM.0
R3.0 specication and offers extra ordinarily high bandwidth for high-speed data
transmission through two high-performance 220-pin connectors.
The ACM-XD15B7 supports Intel Xeon D SoC(Broadwell-DE) processor. The basic
I/O ports support VGA, 4 x USB 2.0, 4 x USB 3.0, COM, 2 x 10GbE LAN, and GPIO
with optional carrier board ADB-XD15MB.
Type Connector
Rows
PCI Express
Lanes
PEG PCI IDE SATA LAN Video Serial Other Features Note
1AB (Single) 6 No No No 4 1 LVDS A & B, VGA Legacy
2AB & CD
(Double) 22 Yes Yes 141LVDS A & B, VGA, PEG/ SDVO Legacy
3AB & CD
(Double) 22 Yes Yes No 4 3 LVDS A & B, VGA, PEG/ SDVO Legacy
4AB & CD
(Double) 32 Yes No 1 4 1 LVDS A & B, VGA, PEG/ SDVO Legacy
5AB & CD
(Double) 32 Yes No No 4 3 LVDS A & B, VGA, PEG/ SDVO Legacy
6AB & CD
(Double) 24 Yes No No 4 1 LVDS A & B, VGA, 3 x DDI
2 TX/RX serial pairs with
option to overlay CAN
interface on 1 port
USB 3.0
7AB & CD
(Double) 32
Yes,
for 16
lans
Yes 2 None
2 TX/RX serial pairs with
option to overlay CAN
interface on 1 port
USB 3.0, 4 x 10Gb
Ethernet
Added in
Rev 3.0
10 AB (Single) 4 No No No 2 1 LVDS A only (AB
(Single) channel), DDI
2 Serial COM, 1 optional
CAN USB 3.0

ACM-XD15B7
6Acrosser Technology Co., Ltd.
1.1. Specifications
CPU • Intel® Xeon® D Processor (Industrial grade)
• Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core)
Chipset • Integrated in SoC processor
BIOS • Software Protection function
• PEG: Enable / Disable(Default)
• PXE Booting: Enable(Default) / Disable
• DMI Link active state power management (ASPM):
Enable / Disable (Default)
Memory • 2x 2400 DDR4 SODIMM (Support ECC function)
• Memory up to 32GB (Dual channel)
• Default conguration: 8GB+8GB (Micron IC Used)
10 GbE Ethernet • 2x 10GBASE KR (10 GbE with KR interface & NC-SI)
• Support PXE Boot function
GbE Ethernet • 1x GbE & (Intel I210IT)
• PCI-e Lane7used by GbE LAN
• Support PXE Boot function
NC-SI • NC-SI supported on AB connector
SATA • 2x SATA III (Port 0/1)
USB • 4x USB2.0 (Port 0/1/2/3)
• 4x USB3.0 (Port 0/1/2/3)
Serial Port • 2x RS-232 (Only TX & RX)
GPIO • 4-bit GPI and 4-bit GPO
PCI-e/PCI Busses
Support
• 24x PCI Express 3.0 lanes
• 1x PCI-e x16 (PCI-e lanes 16~31, reserved 2x PCI-e
x8 by bios setting)
• 1x PCI-e x8 (PCI-e lanes 8~15)
• 8x PCI Express 2.0 lanes
• 6x PCI-e x1: AB connector, PCI-e Lanes 0~5)
• 1x PCI-e x1: CD connector, PCI-e Lanes 6)
OS Support • Linux Kernel 4.9
Heat sink • Aluminum material heat-sink with fan(Default)
• CPU Heat spreader(Optional item)
Watchdog Timer • Software programmable 0~255 seconds, 0 = disable
timer.
Power Mode • AT Mode (Auto power on after power input)

ACM-XD15B7
7
www.acrosser.com
CMOS Battery • Without CMOS Battery.
Dimension • 125 x 95mm (4.92” x 3.74”) COM Express Basic Size
Safety • CE, FCC class A, ASTM D4169 Level 3, REACH
1.2. Packing List
Check if the following items are included in the package.
Item Q’ty
�ACM-XD15B7 1
�Quick Guide 1
�CD Disk 1

ACM-XD15B7
8Acrosser Technology Co., Ltd.
1.3. Block Diagram

ACM-XD15B7
9
www.acrosser.com
2. Hardware Information
2.1. Mainboard Layout
Top View
DIMM1
DIMM2
CPU
CPLD
CPUFAN1
Bottom View
CN1
CN2
SPI_ROM

ACM-XD15B7
10 Acrosser Technology Co., Ltd.
2.2. Connector Pin Definition
CPU Intel Xeon D Processor (Industrial grade)
Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core )
FCBGA1667 37.5x37.5mm
DIMM1/DIMM2 CN_DIMM_1&2 DDR4 SO-DIMM 260P
CPUFAN1 3-pin Fan Connector
Pin # Signal
1 GND
2+12V
3 FAN Speed Sensor
Header: 3-pin. Pitch: 2.54mm.
CPLD CPLD Power Manager
CN1 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 C&D
CN2 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 A&B
SPI_ROM For BIOS Firmware SPI_128Mb
2.2.1. CN1, CN2 Pin Assignments
This module is connected to the carrier board via two 220-pin connectors for a total
of 440 pins connectivity. These connectors are broken down into four rows. The CN2
connector consists of rows A and B, while the CN1 connector consists of rows C and
D.
Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D
1GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
2GBE0_MDI3- GBE0_ACT# GND (FIXED) GND (FIXED)
3GBE0_MDI3+ LPC_FRAME# USB_SSRX0- USB_SSTX0-
4GBE0_LINK100# LPC_AD0 USB_SSRX0+ USB_SSTX0+
5GBE0_LINK1000# LPC_AD1 GND (FIXED) GND (FIXED)
6GBE0_MDI2- LPC_AD2 USB_SSRX1- USB_SSTX1-
7GBE0_MDI2+ LPC_AD3 USB_SSRX1+ USB_SSTX1+
8No Connect LPC_DRQ0# GND (FIXED) GND (FIXED)
9GBE0_MDI1- LPC_DRQ1# USB_SSRX2- USB_SSTX2-

ACM-XD15B7
11
www.acrosser.com
Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D
10 GBE0_MDI1+ LPC_CLK USB_SSRX2+ USB_SSTX2+
11 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
12 GBE0_MDI0- PWRBTN# USB_SSRX3- USB_SSTX3-
13 GBE0_MDI0+ SMB_CK USB_SSRX3+ USB_SSTX3+
14 GBE0_CTREF SMB_DAT GND (FIXED) GND (FIXED)
15 SUS_S3# SMB_ALERT# 10G_PHY_MDC_SCL3 PHY_MDIO_SDA3
16 SATA0_TX+ SATA1_TX+ 10G_PHY_MDC_SCL2 10G_PHY_MDIO_SDA2
17 SATA0_TX- SATA1_TX- 10G_SDP2 10G_SDP3
18 SUS_S4# SUS_STAT# GND GND
19 SATA0_RX+ SATA1_RX+ PCIE_RX6+ PCIE_TX6+
20 SATA0_RX- SATA1_RX- PCIE_RX6- PCIE_TX6-
21 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
22 PCIE_TX15+ PCIE_RX15+ No Connect No Connect
23 PCIE_TX15- PCIE_RX15- No Connect No Connect
24 SUS_S5# PWR_OK 10G_INT2 10G_INT3
25 PCIE_TX14+ PCIE_RX14+ GND GND
26 PCIE_TX14- PCIE_RX14- 10G_KR_RX3+ 10G_KR_TX3+
27 BATLOW# WDT 10G_KR_RX3- 10G_KR_TX3-
28 SATA_ACT# RSVD GND GND
29 RSVD RSVD 10G_KR_RX2+ 10G_KR_TX2+
30 RSVD RSVD 10G_KR_RX2-- 10G_KR_TX2-
31 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
32 RSVD SPKR 10G_SFP_SDA3 10G_SFP_SCL3
33 RSVD I2C_CK 10G_SFP_SDA2 10G_SFP_SCL2
34 BIOS_DISABLE0# I2C_DAT 10G_PHY_RST_23 10G_PHY_SEL_23
35 THRMTRIP# THRM# 10G_PHY_RST_01 10G_PHY_SEL_01
36 PCIE_TX13+ PCIE_RX13+ 10G_LED_SDA RSVD
37 PCIE_TX13- PCIE_RX13- 10G_LED_SCL RSVD
38 GND GND 10G_SFP_SDA1 10G_SFP_SCL1
39 PCIE_TX12+ PCIE_RX12+ 10G_SFP_SDA0 10G_SFP_SCL0
40 PCIE_TX12- PCIE_RX12- 10G_SDP0 10G_SDP1
41 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
42 USB2- USB3- 10G_KR_RX1+ 10G_KR_TX1+
43 USB2+ USB3+ 10G_KR_RX1- 10G_KR_TX1-

ACM-XD15B7
12 Acrosser Technology Co., Ltd.
Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D
44 USB_2_3_OC# USB_0_1_OC# GND GND
45 USB0- USB1- 10G_PHY_MDC_SCL1 10G_PHY_MDC_SDA1
46 USB0+ USB1+ 10G_PHY_MDC_SCL0 10G_PHY_MDC_SDA0
47 VCC_RTC EXCD1_PERST# DDI3_PAIR2- DDI2_PAIR2-
48 RSVD USB0_HOST_PRSNT GND GND
49 GBE0_SDP SYS_RESET# 10G_KR_RX0+ 10G_KR_TX0+
50 LPC_SERIRQ CB_RESET# 10G_KR_RX0- 10G_KR_TX0-
51 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
52 PCIE_TX5+ PCIE_RX5+ PCIE_TX16+ PCIE_RX16+
53 PCIE_TX5- PCIE_RX5- PCIE_TX16- PCIE_RX16-
54 GPI0 GPO1 TYPE0# RSVD
55 PCIE_TX4+ PCIE_RX4+ PCIE_TX17+ PCIE_RX17+
56 PCIE_TX4- PCIE_RX4- PCIE_TX17- PCIE_RX17-
57 GND GPO2 TYPE1# TYPE2#
58 PCIE_TX3+ PCIE_RX3+ PCIE_TX18+ PCIE_RX18+
59 PCIE_TX3- PCIE_RX3- PCIE_TX18- PCIE_RX18-
60 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
61 PCIE_TX2+ PCIE_RX2+ PCIE_TX19+ PCIE_RX19+
62 PCIE_TX2- PCIE_RX2- PCIE_TX19- PCIE_RX19-
63 GPI1 GPO3 RSVD RSVD
64 PCIE_TX1+ PCIE_RX1+ RSVD RSVD
65 PCIE_TX1- PCIE_RX1- PCIE_TX20+ PCIE_RX20+
66 GND WAKE0# PCIE_TX20- PCIE_RX20-
67 GPI2 WAKE1# RSVD GND
68 PCIE_TX0+ PCIE_RX0+ PCIE_TX21+ PCIE_RX21+
69 PCIE_TX0- PCIE_RX0- PCIE_TX21- PCIE_RX21-
70 GND(FIXED) GND(FIXED) GND(FIXED) GND(FIXED)
71 PCIE_TX8+ PCIE_RX8+ PCIE_TX22+ PCIE_RX22+
72 PCIE_TX8- PCIE_RX8- PCIE_TX22- PCIE_RX22-
73 GND GND GND(FIXED) GND(FIXED)
74 PCIE_TX9+ PCIE_RX9+ PCIE_TX23+ PCIE_RX23+
75 PCIE_TX9- PCIE_RX9- PCIE_TX23- PCIE_RX23-
76 GND GND GND GND
77 PCIE_TX10+ PCIE_RX10+ RSVD RSVD

ACM-XD15B7
13
www.acrosser.com
Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D
78 PCIE_TX10- PCIE_RX10- PCIE_TX24+ PCIE_RX24+
79 GND GND PCIE_TX24- PCIE_RX24-
80 GND(FIXED) GND(FIXED) GND(FIXED) GND(FIXED)
81 PCIE_TX11+ PCIE_RX11+ PCIE_TX25+ PCIE_RX25+
82 PCIE_TX11- PCIE_RX11- PCIE_TX25- PCIE_RX25-
83 GND GND RSVD RSVD
84 NCSI_TX_EN VCC_5V_SBY GND GND
85 GPI3 VCC_5V_SBY PCIE_TX26+ PCIE_RX26+
86 RSVD VCC_5V_SBY PCIE_TX26- PCIE_RX26-
87 RSVD VCC_5V_SBY GND GND
88 PCIE0_CK_REF+ BIOS_DISABLE1# PCIE_TX27+ PCIE_RX27+
89 PCIE0_CK_REF- NCSI_TRI_EN PCIE_TX27- PCIE_RX27-
90 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
91 SPI_POWER (3.3V) NCSI_CLK_IN PCIE_TX28+ PCIE_RX28+
92 SPI_MISO NCSI_RXD1 PCIE_TX28- PCIE_RX28-
93 GPO0 NCSI_RXD0 GND GND
94 SPI_CLK NCSI_CRS_DV PCIE_TX29+ PCIE_RX29+
95 SPI_MOSI CSI_TXD1 PCIE_TX29- PCIE_RX29-
96 TPM_PP CSI_TXD0 GND GND
97 TYPE10# SPI_CS# RSVD RSVD
98 SER0_TX NCSI_ARB_IN PCIE_TX30+ PCIE_RX30+
99 SER0_RX NCSI_ARB_OUT PCIE_TX30- PCIE_RX30-
100 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)
101 SER1_TX No Connect PCIE_TX31+ PCIE_RX31+
102 SER1_RX FAN_TACHIN PCIE_TX31- PCIE_RX31-
103 LID# No Connect GND GND
104 VCC_12V VCC_12V VCC_12V VCC_12V
105 VCC_12V VCC_12V VCC_12V VCC_12V
106 VCC_12V VCC_12V VCC_12V VCC_12V
107 VCC_12V VCC_12V VCC_12V VCC_12V
108 VCC_12V VCC_12V VCC_12V VCC_12V
109 VCC_12V VCC_12V VCC_12V VCC_12V
110 GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)

ACM-XD15B7
14 Acrosser Technology Co., Ltd.
2.3. Board Dimension
(Unit: mm)

ACM-XD15B7
15
www.acrosser.com
3. BIOS Settings
This chapter describes the BIOS menu displays and explains how to perform
common tasks needed to get the system up and running. It also gives detailed
explanation of the elements found in each of the BIOS menus. The following topics
are covered:
• Main Setup
• Advanced Setup
• Chipset Setup
• Boot Setup
• Security Setup
• Save & Exit Setup
Once you enter the Award BIOS™ CMOS Setup Utility, the Main Menu will appear
on the screen. Use the arrow keys to highlight the item and then use the <Pg Up>
<Pg Dn> keys to select the value you want in each item.
3.1. Main Setup
The BIOS setup main menu includes some options. Use the [Up/Down] arrow key to
highlight the option, and then press the [Enter] key to select the item and congure
the functions.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
BIOS Information
BIOS Vendor
Core Version
Compliancy
Project Name
Release Version
Build Date and Time
Memory Information
Total Memory
System Date
Ststem Time
American Megatrends
4.6.5.3
UEFI 2.3; PI 1.2
ACM-XD15B7
100-001
01/01/2018 00:00:01
4096 MB (DDR3)
[Thu 01/01/2018]
[11:22:33]
Set the Date. Use Tab to
switch between Date
elements.
Note: Listed at the bottom of the menu are the control keys. If you need any help with the
item elds, you can press <F1> key, and it will display the relevant information.

ACM-XD15B7
16 Acrosser Technology Co., Ltd.
• System Date
Set the system date.
• System Time
Set the system time.
3.2. Advanced Setup
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
Serial Port Console Redirection
Boot Select
Legacy Pxe Enable or Disable
[Legacy]
[Enable]
SATA Device Options
Settings

ACM-XD15B7
17
www.acrosser.com
3.2.1. Serial Port Console Redirection
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced
COM 0
Console Redirection
Console Redirection Settings
COM 1
Console Redirection
Console Redirection Settings
Legacy Console Redirection
Legacy Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
[Enabled]
[Enabled]
[Enabled]
The setting specify how the
host computer and the
remote computer will
exchange data. Both
computers should have the
same or compatiable
settings.
• Console Redirection
The setting specify how the host computer and the remote computer will exchange
data. Both computers should have the same or compatiable settings.

ACM-XD15B7
18 Acrosser Technology Co., Ltd.
3.3. Chipset Setup
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
PCH SATA Configuration PCH Parameters
3.3.1. PCH SATA Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Chipset
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Port 0
Hot Plug
SATA Device Type
Serial ATA Port 1
Software Preserve
Port 1
Hot Plug
SATA Device Type
[Enabled]
[AHCI]
Empty
Unknown
[Enabled]
[Disabled]
[Hard Disk Driver]
Empty
Unknown
[Enabled]
[Disabled]
[Hard Disk Driver]
Enable or disable SATA
Device.
• SATA Controller(s)
Enable or disable SATA Device.

ACM-XD15B7
19
www.acrosser.com
3.4. Boot Setup
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
Boot Logo
Driver Option Priorities
Boot Option Priorities
Network Device BBS Priorities
[Enabled] Enables or disables Quiet
Boot option
• Boot Logo
Enables or disabled Quiet Boot option.
3.5. Security Setup
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
Set Administrator
Password
3
20
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and muste be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password

ACM-XD15B7
20 Acrosser Technology Co., Ltd.
Once a password is effective, you have to enter the administrator password or user
password before you access into the BIOS setup interface.
• Administrator Password
Set Administrator Password.
• User Password
Set User Password.
3.6. Save & Exit Setup
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Main Advanced Chipset Boot Security Save & Exit
Exit system setup after
saving the changes.
Save Changes and Exit
Discard Changes and Reset
Restore Defaults
• Save Changes and Reset
Exit system setup after saving the changes.
• Discard Changes and Reset
Exit system setup without saving any changes.
• Restore Defaults
Restore/Load the default values for all the set up options.