Acrosser Technology AND-DNV3Ax User manual

AND-DNV3Ax
User Manual
Acrosser Technology Co., Ltd.
www.acrosser.com
AND-DNV3Ax
Networking Micro Box
• Intel®Denverton®SoC
• 6x GbE Copper (1-pair bypass)
• 2x SFP
• 2x SFP+

AND-DNV3Ax
2Acrosser Technology Co., Ltd.
To read this User Manual on your smart phone, you will have to install an
APP that can read PDF le format rst. Please nd the APP you prefer from
the APP Market.
Ver: 100-002
Date: Sep. 16, 2021
Disclaimer
For the purpose of improving reliability, design and function, the information in
this document is subject to change without prior notice and does not represent a
commitment on the part of Acrosser Technology Co., Ltd.
In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use the
product or documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of Acrosser Technology
Co., Ltd.
Trademarks
The product names appear in this manual are for identication purpose only. The
trademarks and product names or brand names appear in this manual are the
property of their respective owners.
Purpose
This document is intended to provide the information about the features and use of
the product.
Audience
The intended audiences are technical personnel, not for general audiences.
WARNING
Danger of explosion if batteries are incorrectly replaced. Always replace the
battery with the same specications. Dispose of used batteries according to the
manufacturer's instructions.
Before running the system, make sure the power cord is rmly plugged into the
socket.
CAUTION
IEC 60417-6042 (2010-11) IEC 60417-6172 (2012-09)
All power cords must be disconnected during product repair.

AND-DNV3Ax
3www.acrosser.com
Table of Contents
1. System Introduction ...................................................................... 5
1.1. Specications ............................................................................................................. 5
1.2. Package Contents ...................................................................................................... 8
1.3. Model Description....................................................................................................... 8
1.4. System Dissection...................................................................................................... 9
1.4.1. Dimensions ..................................................................................................... 9
1.4.2. Front I/O Panel.............................................................................................. 10
1.4.3. Rear I/O Panel ...............................................................................................11
2. Components Assembly ............................................................... 12
2.1. SIM Card Installation ................................................................................................ 12
2.2. PCB Parts Description.............................................................................................. 14
2.3. Hard Disk Installation................................................................................................ 16
3. BIOS Settings ............................................................................... 18
3.1. Main Setup ............................................................................................................... 18
3.2. Advanced Setup ....................................................................................................... 20
3.2.1. Advanced Setup: Trusted Computing ........................................................... 20
3.2.2. Advanced Setup: OnBoard Bypass Controller .............................................. 21
3.2.3. Advanced Setup: W83627DHG Super IO Conguration .............................. 22
3.2.4. Advanced Setup: W83627DHG HW Monitor ................................................ 24
3.2.5. Advanced Setup: Serial Port Console Redirection........................................ 25
3.2.6. Advanced Setup: Network Stack Conguration ............................................ 27
3.2.7. Advanced Setup: CSM Conguration ........................................................... 28
3.2.8. Advanced Setup: USB Conguration ............................................................ 29
3.3. IntelRCSetup ............................................................................................................ 30
3.3.1. IntelRCSetup: Processor Conguration ........................................................ 30
3.3.2. IntelRCSetup: South Bridge Chipset Conguration ..................................... 31
3.3.3. IntelRCSetup: SATA Port............................................................................... 32
3.3.4. IntelRCSetup: M.2 SATA Port........................................................................ 33
3.4. Security Setup .......................................................................................................... 33
3.5. Boot Setup................................................................................................................ 34
3.6. Save & Exit Setup..................................................................................................... 35
4. Software Installation and Programming Guide ........................ 36
4.1. Introduction............................................................................................................... 36
4.1.1. Environment .................................................................................................. 36
4.1.2. GPIO ............................................................................................................. 36
4.1.3. Watchdog ...................................................................................................... 36
4.1.4. LAN Bypass Subsystem................................................................................ 36

AND-DNV3Ax
4Acrosser Technology Co., Ltd.
4.2. File Descriptions....................................................................................................... 37
4.2.1. GPIO/Watchdog/LAN Bypass Subsystem Module........................................ 37
4.3. API List and Descriptions ......................................................................................... 37
4.3.1. GPIO ............................................................................................................. 37
4.3.2. Watchdog ...................................................................................................... 38
4.3.3. LAN Bypass Subsystem................................................................................ 38
4.3.4. Notes............................................................................................................. 40
5. FAQ ............................................................................................... 41
Q 1. Where is the serial number located on my system ?................................................ 41
Q 2. How to active the second SIM card Quectel EM06-A/EM06-E 4G ?........................ 41
Q 3. How to active the second SIM card Quectel EM12-G 4G ? .................................... 41
Q 4. How to active the second SIM card SIMCOM SIM8202G 5G ? .............................. 41
Q 5. How to switch over Sierra Module Dual SIM Setting ?............................................. 42

AND-DNV3Ax
5www.acrosser.com
1. System Introduction
AND-DNV3A2/A3 is an entry level networking appliance. In a small box, this
appliance equip a powerful Intel Atom C3000 SoC. This SoC supports multi-core
CPU computing and support QAT, USB 3.0 and LAN controller which can be 10GbE
capable. AND-DNV3A2/A3 is an ideal networking appliance for small ofce. It can
support up to 10 LAN ports with both copper and ber media. Supports two USB 3.0
ports, optional WiFi 5 and 4G or 5G wireless connection. In addition, AND-DNV3A2
consumes only a few power. In this small yet powerful box, the thermal dissipation is
really well designed so no fan is needed. This fanless design not only made a quiet
ofce be possible, but also assure the non-stop LAN connection for the business
environment. For that no fan means no moving part which is the most vulnerable part
in the electronic device. AND-DNV3A3 has a smart fan that can effectively dissipate
the massive heat generated by the 8 core CPU with less power and noise that lead
to a comfortable operating experience and longer product life.
1.1. Specifications
(Specications are subject to change without notice.)
General
Thermal Solution • Fanless Design (C3558)
• Smart Fan (C3758)
CPU • Intel®Denverton®C3758 8 cores, 2.2GHz
• Intel®Denverton®C3558 4 cores, 2.2GHz
Memory • 1x SO-DIMM DDR4
BIOS • Support Console Re-direction
• Support Bypass Setting
Scenario Normal Bypass
SYS (ON) V
SYS (OFF) V
WDT (Timeout) V
PWR (Lost) Remained prior status
• Support PXE boot from all RJ-45 Coppers
Network Interface
Ethernet (on-board) • 6x GbE Copper + 2x GbE Fiber + 2x 10Gb Fiber
• Intel i211, LAN [1: 6] Copper
• Intel i210iS, SFP[1:2]
• SoC embedded SFI, SFP+[1:2]
LAN bypass (1-pair) • LAN bypass by LAN[1: 2]

AND-DNV3Ax
6Acrosser Technology Co., Ltd.
Storage
HDD Bay • 1x 2.5” Internal HDD Bay
M.2 B Socket • 1x M.2B Socket for 2242 SSD
M.2 M Socket • 1x M.2M Socket for NVMe 2242/2260/2280 SSD
I/O
Front Panel • 6x Ethernet Link/Act LED
• 6x Ethernet 1000M LED
• 6x Ethernet 100/10M LED
• 2x SFP Link LED
• 2x SFP Act LED
• 2x SFP+ Link LED
• 2x SFP+ Act LED
• 1x Sys Power LED
• 1x Storage LED
• 1x LAN Bypass LED
Rear Panel • Reset button
• 2x USB 3.0
• 1x RJ45 Console Port
• 2x SFP+
• 2x SFP
• 6x GbE RJ45
• 6x Optional SMA for WLAN & WWAN (WiFi 5 & 4G/5G
LTE)
• 1x DC-in Connector (12V)
Internal I/O • 1x M.2E Connector (for Wi-Fi 5 2T2R module)
• 1x M.2B Connector (with USB 2.0+3.0 signal & SATA3,
for 4G/5G Module or 2242 SSD) with 2 SIM Sockets
• 1x M.2M Socket for NVMe SSD
• 1x SATA3+power Connector
• Smart Fan Connector (for C3758)
Other Features
Watchdog Timer • Software programmable 0~255 Seconds, 0=disable
timer.
Battery • Lithium Battery, 3V 220mAH (CR2032), for RTC
Hardware Monitoring • CPU Voltage
• CPU Temperature
• System Temperature
• Fan Speed (for C3758)
Security & Mgmt. • On-board TPM 2.0

AND-DNV3Ax
7www.acrosser.com
Power Requirement
Power Adapter • 12VDC, 40W or 60W Adapter (60W for C3758)
Software
OS Support • Linux Kernel 4.4 & above, (64-bit)
Mechanical & Environment
Dimension • 270(L) x 160(W) x 44(H) mm
Operating Temperature • 0 ~ 40°C (32 ~ 104°F)
Storage Temperature • -20 ~ 80°C (-4 ~ 176°F)
Relative Humidity • 0 to 90% @40°C, non-condensing
EMC & Safety
Certication • CE, FCC Class A, RoHS 2, cULus
Drop Test • ISTA-2A 2006

AND-DNV3Ax
8Acrosser Technology Co., Ltd.
1.2. Package Contents
Check if the following items are included in the package.
Item Q’ty Remark
�AND-DNV3Ax System 1
�Power Adapter (12V) 1
�Power Cord 1
�Screw Pack 1
1.3. Model Description
Model Name Description
AND-DNV3A3 Intel Atom C3758 (8-core) SoC, 6 GbE Copper (1-pair
bypass), 2x SFP, 2x SFP+, 2x USB 3.0, 1x 2.5”SATAIII, 1x
M.2E socket (for WLAN) and 1x M.2B (for 2x 4G LTE or 2242
SSD), 1x M.2M ( for NVMe 2242/2260/2280 SSD), 1x 12V
DC-In. 60W Adapter and Smart fan design.
AND-DNV3A2 Intel Atom C3558 (4-core) SoC, 6 GbE Copper (1-pair
bypass), 2x SFP, 2x SFP+, 2x USB 3.0, 1x 2.5”SATAIII, 1x
M.2E socket (for WLAN) and 1x M.2B (for 2x 4G LTE or 2242
SSD), and 1x 12V DC-In. 40W adapter and fanless design.

AND-DNV3Ax
9www.acrosser.com
1.4. System Dissection
1.4.1. Dimensions
(Unit: mm)

AND-DNV3Ax
10 Acrosser Technology Co., Ltd.
1.4.2. Front I/O Panel
• Power
System Power LED
• Storage
Storage Active LED
• Bypass
LAN Bypass LED
• LAN 1~6
LAN 1~6 Link/Active LED
• SFP 1~2
SFP 1~2 Link/Active LED
• SFP+ 1~2
SFP+ 1~2 Link/Active LED
• SIM CARD
SIM Card Socket
SIM1
SIM2
Note: If you use a 4G LTE/5G module that only supports one single SIM card, please insert
the SIM CARD into the SIM1 slot.

AND-DNV3Ax
11www.acrosser.com
1.4.3. Rear I/O Panel
• ANT1 ~ ANT6
SMA Antenna Hole. Reserved for optional WLAN & WWAN (WiFi 5 & 4G/5G LTE)
• Reset
Reset Button
• DC 12V
DC12V Power Input
• Console: Console Port (RJ45)
Pin # Signal Pin # Signal
1RTS 5GND
2DTR 6RxD
3TxD 7DSR
4GND 8CTS
• USB 3.0
USB 3.0 Port
• LAN 1 ~ LAN 6: RJ45 LAN Port
LED Light Status
Left Green (Blink) Link with Activity
Right
Off 10Mbps
Yellow 100Mbps
Green 1000Mbps
• SFP 1 ~ SFP 2
Standard SFP Connector for 1G LAN
• SFP+ 1 ~ SFP+ 2
Standard SFP+ Connector for 10G LAN

AND-DNV3Ax
12 Acrosser Technology Co., Ltd.
2. Components Assembly
Please follow the instruction to install the inner modules.
2.1. SIM Card Installation
Step 1: Remove the screw on the SIM Card cover plate.
Step 2: Take down the SIM Card cover plate.
Step 3: Insert the SIM card.

AND-DNV3Ax
13www.acrosser.com
Step 4: Push the SIM card into the socket until it docks in locked position.
Step 5: Put the the SIM Card cover plate back.
Step 6: Lock the SIM Card cover plate with screw.

AND-DNV3Ax
14 Acrosser Technology Co., Ltd.
2.2. PCB Parts Description
FAN1 FAN2
CN_USB1
LAN1~LAN4
PWR1
M2_SIM1
CONSOLE1
SFP+_LED2 SFP+_LED1 LED_SFP2 LED_SFP1 LED1
JP_CCMOS2
LAN5
CN_SFP2
CN_LPC1 LED_LAN6 LED_LAN5 LED_LAN4 LED_LAN3 LED_LAN2 LED_LAN1
GP1
NGFF_B_1NGFF_E_1
NGFF_M_1
SATA1SATA_PWR1
CN_BAT1
CN_PIC2
CN_PIC1
BTN1 LAN6
CN_SFP4 CN_SFP3 CN_SFP1
DIMM1
EMMC
M2_SIM2
NGFF_M_1
M.2M socket for NVMe 2242/2260/2280 SSD (For AND-DNV3A3 only)
There is one screw pre-installed on board to x your SSD of different length. Please
adjust the position of the screw and spacer according to your SSD to x it on baord.
Insert your SSD to NGFF_M_1 connector, and x it onto one of the three holes at left
according to its length.
NGFF_E_1
M.2E connector for Wi-Fi 2T2R module
The Wi-Fi antenna is SMA female type. Please connect to the socket marked with
Wi-Fi on the panel and have it fastened.
NGFF_B_1
M.2B connector with USB 2.0+3.0 signal & SATA3, for 4G/5G module or 2242 SSD
The 4G/5G antenna is SMA male type. Please connect to the socket marked with
4G/5G on the panel and have it fastened.

AND-DNV3Ax
15www.acrosser.com
DIMM1
FAN1 FAN2
CN_USB1
LAN1~LAN4
PWR1
M2_SIM1
CONSOLE1
SFP+_LED2 SFP+_LED1 LED_SFP2 LED_SFP1 LED1
JP_CCMOS2
LAN5
CN_SFP2
CN_LPC1 LED_LAN6 LED_LAN5 LED_LAN4 LED_LAN3 LED_LAN2 LED_LAN1
GP1
NGFF_B_1NGFF_E_1
NGFF_M_1
SATA1SATA_PWR1
CN_BAT1
CN_PIC2
CN_PIC1
BTN1 LAN6
CN_SFP4 CN_SFP3 CN_SFP1
DIMM1
EMMC
M2_SIM2
The memory module is DDR4 SO-DIMM type.
Check if the DIMM keys align correctly with the connector. Firmly press the DIMM
straight down to lock into position. The retaining clips snap into the locked position
when the DIMM is rmly seated in the connector.

AND-DNV3Ax
16 Acrosser Technology Co., Ltd.
2.3. Hard Disk Installation
Step 1: Use a philips screw driver to remove the four screws located at the front
panel. Push the body out to open the top cover.
Step 2: The hard drive uses SATA 2.5” type. Connect the hard drive with SATA
cable and SATA power cable taken out from the accessory bag, and then
xed it to the top cover. When using HDD 9mm, please place the front
side facing the mainboard and x screws at 4 sides.

AND-DNV3Ax
17www.acrosser.com
Step 3: Before xing the hard disk, stuff the yellow anti-vibration wire loop in the
small circle rst, and then use a cross screwdriver to x the hard disk with
screws on 4 sides. The yellow anti-vibration wire loop and the screws are
included in the accessory bag.
Step 4: Connect the SATA cable/SATA power cable to the mainboard. The end
of SATA cable is black, SATA power cable is white. Please connect it
according to the fool-proof design.

AND-DNV3Ax
18 Acrosser Technology Co., Ltd.
3. BIOS Settings
This chapter describes the BIOS menu displays and explains how to perform
common tasks needed to get the system up and running. It also gives detailed
explanation of the elements found in each of the BIOS menus. The following topics
are covered:
• Main Setup
• Advanced Setup
• IntelRCSetup Setup
• Security Setup
• Boot Setup
• Save & Exit Setup
Once you enter the Award BIOS™ CMOS Setup Utility, the Main Menu will appear
on the screen. Use the arrow keys to highlight the item and then use the <Pg Up>
<Pg Dn> keys to select the value you want in each item.
3.1. Main Setup
The BIOS setup main menu includes some options. Use the [Up/Down] arrow key to
highlight the option, and then press the <Enter> key to select the item and congure
the functions.
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Main Advanced IntelRCSetup Security Boot Save & Exit
Set the Date. Use Tab to
switch between Date
elements.
Default Ranges:
Year: 2005-2099
Months: 1-12
Days: Dependent on month
BIOS Information
BIOS Vendor
Core Version
Compliancy
Project Version
Build Date and Time
Memory Information
Total Memory
Ststem Date
Ststem Time
American Megatrends
5.13
UEFI 2.6; PI 1.4
ADM-DNV3Ax 100-001
01/01/2021 11:22:33
8192 MB (DDR4)
[Fri 01/01/2021]
[11:22:33]
Note: Listed at the bottom of the menu are the control keys. If you need any help with the
item elds, you can press <F1> key, and it will display the relevant information.

AND-DNV3Ax
19www.acrosser.com
• Total Memory
This item displays the total size of memory available in the system.
• System Date/System Time
Use this option to change the system date and time. Highlight System Date or
System Time using the arrow keys. Enter new values using the keyboard. Press the
key or the arrow keys to move between elds. The date must be entered in MM/DD/
YYYY format. The time is entered in HH:MM:SS format.

AND-DNV3Ax
20 Acrosser Technology Co., Ltd.
3.2. Advanced Setup
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
IntelRCSetup Security Boot Save & ExitMain Advanced
Trusted Computing
OnBoard Bypass Controller
W83627DHG Super IO Configuration
W83627DHG HW Monitor
Serial Port Console Redirection
Network Stack Configuration
CSM Configuration
USB Configuration
Trusted Computing
Settings
3.2.1. Advanced Setup: Trusted Computing
Version 2.19.1266. Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
TPM20 Device Found
Vendor: IFX
Firmware Version: 5.61
Security Device Support
Active PCR banks
Available PCR banks
SHA-1 PCR Bank
SHA256 PCR Bank
Pending operation
Platform Hierarchy
Storage Hierarchy
Endorsement Hierarchy
TPM2.0 UEFI Spec Version
Physical Presence Spec Version
TPM2.0 Interface Type
Device Select
Enables or Disables BIOS
support for security
device. O.S. will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.
[Enabled]
SHA-1, SHA256
SHA-1, SHA256
[Enabled]
[Enabled]
[None]
[Enabled]
[Enabled]
[Enabled]
[TCG_2]
[1.3]
[TIS]
[Auto]
• Security Device Suppor
Enables or Disables BIOS support for security device. O.S. will not show Security
Device. TCG EFI protocol and INT1A interface will not be available.