ACT ACTPRO 4000 User manual

Card access door controller
ACTpro 4000
The ACTpro 4000 is a two door controller that
can extend to a total of 16 doors via ACTpro door
stations. In turn up to 250 ACTpro 4000s may
be networked via a PC interface to facilitate up
to 4,000 doors. The ACTpro 4000 can support
60,000 users.
ACTpro 4000
Main Features
60,000 users•
1,024 user groups•
256 time zones•
TCP/IP Networking•
10/100 Mbps Fast Ethernet•
Flash upgradeable firmware•
Timed anti passback•
Entry and exit reader support•
DDA individual timer facility•
Voltage monitoring•
Low bandwidth requirements•
DHCP or Static IP address•
Auto discovery simplifies installation•
Quick download speeds for large•
databases
Monitor controller status via a web•
page
ACTpro 4000 Schematic
Readers to Controller
Distance: from reader to controller up to 100 metres
Cable Type: 8 core screen
Power: 12 Volts DC (check manufacturers instructions)

Card access door controllerCard access door controller
Access Control Technology, Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland
t: 353 (0)1 466 2570. UK Lo-call: 0845 300 5204. f: 353 (0)1 452 0427. e: [email protected]. w: www.accesscontrol.ie
Ordering Information
ACTpro 4000 Controller
ACTpro 4000 MC ACTpro 4000 memory card
ACTpro 100 Single door station
ACTpro 101 PCB format single door station
ACTpro 102 PCB format two door station
ACTpro 200 2 door door station, built in 3amp
PSU
ACTpro IOM input / output module
ACT Net IF-1 single channel RS485 interface
ACT Net IF-4 four channel interface
USB Cable
Product Specification
Operating Voltage 12 Volts DV
Current Consumption 150 / 400 mA
Weight 800 gms
Operating Temperature 0 to +50 C
Mounting Surface
Installation Indoor
1000 2000 3000 3200 4000
Doors 1 2* 2* 4* 2*
Users 10,000 20,000 30,000 30,000 60,000
User Groups 16 1,024 1,024 1,024 1,024
Event Log 500 5,000 5,000 5,000 5,000
Anti passback **
Entry & Exit Reader
Support
Timed Actions
Interlock
User Tracking
Visitor Cards
Card only
Pin & Card
Pin or Card
Pin Only *** *** *** ***
Door Monitoring
Door Control
Fire Alarm Override
Toggle Mode
Door Relay Output 5 amp 5 amp 5 amp 5 amp 5 amp
Auxiliary Relay Output 1 amp 1 amp 1 amp 1 amp
Programmable Inputs 2 2 2 2 2
Programmable Outputs 2 (100mA) 2 (100mA) 2 (100mA) 2 (100mA) 2 (100mA)
Tamper Output
Network Doors 128 max 1,000 max 2,000 max 2,000 max 4,000 max
Moden Connection
TCP/IP Option
Ethernet Network
Interface
10 Mbps 10 Mbps 100/10
Mbps
Weight 651g 687g 694g 5.88 Kg 800g
Dimensions
(H x W x D, mm)
138 x 87
x 37
270 x 190
x 60
270 x 190
x 60
355 x 370
x 85
270 x 190
x 60
DHCP or Static IP
Address
Voltage Monitoring
USB
Autodiscovery
Notes to the Product Comparison Chart on opposite side
* The ACTpro 2000/3000/3200/4000 Controllers may be
expanded to 16 doors via ACTpro door stations
** Global anti passback (anti passback across multiple controllers)
is mainly supported on the ACTpro 3000/3200/4000 connected
via TCP / IP
*** The ACTpro 2000/3000/3200/4000 Controllers require an
external pin pad for Pin Only Operation
Product Comparisons