ACU-RITE 00611 User manual
ACU
►
RITE
.
Product
Registration
DESIGNED
TO
WORK
FOR
vou
·
To
receive product information, register
your product online.
Ifs
quick and easy!
Log
on
to
http://www.chaneyinstrument.com/product_reg.htm
ACU
►
RITE®
DESIGNED
TO
WORK
FOR
vou
·
This device complies with part
15
of the
FCC
rules.
Operation is subject to the following two conditions:
1- This device may
NOT
cause
harmful
interference, and
2- This device must accept any interference received,
including interference that may cause undesired operation.
NOTE
:This equipment has
been
tested
and
found to comply with the limits for a Class
B digital device, pursuant to Part
15
of the
FCC
rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses
and
can
radiate radio frequency energy
and, if not installed
and
used
in
accordance with the instructions, may cause harmful
interference
to
radio communications. However,There is
no
guarantee that
interference
will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can
be
determined
by
turning the equipment off
and
on,
the user is encouraged to try to correct the
interference
by
one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and
the receiver.
• Connect the equipment into
an
outlet
on
a circuit different from that
to
which the
receiver is connected.
• Consult the dealer or
an
experienced radio/TV technician for help.
NOTE:
The
manufacturer is not responsible for any radio
or
TV
interference caused
by
unauthorized modifications to this equipment.
Such
modifications could void the user
authority to operate the equipment.
Patent
numbers
: 5,978,738; 6,076,044; 6,597,990
INST
-
00
6
11
0405
07
Instruction Manual
Package Contents:
[1l Main Unit [Al with stand
[1l Wireless Sensor [Bl
[1l Instruction Manual
0 [1l Hardware Bag
What
You
Need:
• Philips Screwdriver
• [5l
AA
batteries
-see "Install Batteries"
A.
Main Unit B. Wireless Sensor
on
page 2
Thank
You
for purchasing this ACURITE®product. This wireless
thermometer
features outdoor temperature and humidity, outdoor temperature memory (daily
high/low), and indoor temperature and humidity. Please read this manual
in
it's
entirety
to
fully enjoy the benefits and features of this product. Please keep this
manual for future reference.
NOTE
: A
clear
film is applied to
the
LCD
at
the
factory
that
must
be removed prior
to using this product. Locate
the
clear
tab and simply
peel
to remove.
( 1 •
OVERVIEW
OF
FEATURES
)
Outdoor
Temp
.
---"-.....;;~
·
Daily
High
today
's
low
36'F
Outdoor
Temp
.
Daily
Low
3
--
6-
o/.
-•
---I.--'---
Indoor Relative
'°' Humidity
- 1 -
(2• SETUP )
Install
Batteries
NOTE
: Install
all
batteries
in
both 0
units within a 6 minute period to
ensure proper wireless functionality.
A.
Wireless Sensor
1]
Remove the 4 battery
,•
compartment screws.
2]
Remove the battery / ©
REMOVE
4
SCREWS
compartment cover and
TO
OPEN
BATTERY
2 "AA"
COMPARTMENT
install 2 fresh
"AA"
batteries as shown here.
,/
@
\.
@
BATTERIES
Always install batteries
into the wireless sensor
FIRST
to ensure proper
wireless synchronization
with the main unit.
B.
Main
Unit
Remove the battery
compartment cover and
install 3 fresh
"AA"
batteries as shown here.
INSTALL
3
"AA
"
BATTERIES
Operating Range of Batteries Extended periods of cold temperatures ( below -4°F /
-20°c
)
can
cause alkaline batteries
to
function improperly. This will
B~rr~~~
s
0-f
ii
ii-h
M
(70GC)
158°F
I cause the outdoor wireless sensor
to
stop transmitting
:~~~
I
~~
@Q
ffl
(10DC)158°F
I temperature readings.
Use
lithium batteries in these low
temperature conditions
to
ensure continued operation
for
wireless sensors placed outdoors.
PLEASE
DISPOSE
OF
OLD
OR
DEFECTIVE
BATTERIES
IN
AN
ENVIRONMENTALLY
SAFE
WAY
AND
IN
ACCORDANCE
WITH
YOUR
LOCAL
LAWS
AND
REGULATIONS.
BATTERY
SAFETY
:
Follow
the polarity(+/-)
diagram
in
the
battery compartment.
Promptly
remove
dead
batteries
from
the
device.
Dispose
of
used
batteries
properly.
Only
batteries
of
the
same
or
equivalent type
as
recommended
are
to
be
used.
DO
NOT
incinerate
used
batteries.
DO
NOT
dispose
of
batteries
in
fire,
as
batteries
may
explode
or
leak.
DO
NOT
mix
old
and
new
batteries
or
types
of
batteries (alkaline/standard).
DO
NOT
use
rechargeable batteries.
DO
NOT
recharge
non-rechargeable batteries.
DO
NOT
short-circuit the
supply
terminals. -2 -
Select Celsius (°C]
or
Fahrenheit
(°F]
The
main unit is capable of
displaying the indoor and
outdoor temperature
readings
in
either 0 c
or
°F.
To
select either 0 c
or
°F,
slide the switch located
within the battery
compartment to the desired
measurement unit.
select
°C
or
°F
temperature
display
Close
Battery
Compartment
Covers
After
you
have
installed fresh batteries and
have
selected
°C
or
°F,
you
may
now close the battery compartment covers
on
both the main unit and the
wireless sensor.
Basic Setup is Now Complete
The
wireless sensor
will
soon send a signal to the main unit and the two
units·
will
be
synchronized. It may take a few minutes for synchronization to
complete. If both
or
one of units appear to
be
functioning improperly, refer
to the troubleshooting section
in
this manual.
( 3 • PLACEMENT )
Now that setup is complete,
you
must choose a location to place the wireless
sensor and the main unit.
The
wireless sensor
MUST
be
placed less than
100
feet from the main unit.
This wireless thermometer uses radio frequency
for
communication, which is
susceptible to interference from other electronic devices and large metallic
items
or
thick walls. Always place both units at least 3 feet away from
appliances (
TV,
microwave, radios, etc.]
or
objects ( large metal surfaces, thick
stone walls, etc.] that may interfere with the wireless communication.
\ I /
-
--o
...
-
/ I
\'
100 feet
maximum
- 3 -
(2• SETUP )
Install
Batteries
NOTE
: Install
all
batteries
in
both 0
units within a 6 minute period to
ensure proper wireless functionality.
A.
Wireless Sensor
1]
Remove the 4 battery
,•
compartment screws.
2]
Remove the battery / ©
REMOVE
4
SCREWS
compartment cover and
TO
OPEN
BATTERY
2 "AA"
COMPARTMENT
install 2 fresh
"AA"
batteries as shown here.
,/
@
\.
@
BATTERIES
Always install batteries
into the wireless sensor
FIRST
to ensure proper
wireless synchronization
with the main unit.
B.
Main
Unit
Remove the battery
compartment cover and
install 3 fresh
"AA"
batteries as shown here.
INSTALL
3
"AA
"
BATTERIES
Operating Range of Batteries Extended periods of cold temperatures ( below -4°F /
-20°c
)
can
cause alkaline batteries
to
function improperly. This will
B~rr~~~
s
0-f
ii
ii-h
M
(70GC)
158°F
I cause the outdoor wireless sensor
to
stop transmitting
:~~~
I
~~
@Q
ffl
(10DC)158°F
I temperature readings.
Use
lithium batteries in these low
temperature conditions
to
ensure continued operation
for
wireless sensors placed outdoors.
PLEASE
DISPOSE
OF
OLD
OR
DEFECTIVE
BATTERIES
IN
AN
ENVIRONMENTALLY
SAFE
WAY
AND
IN
ACCORDANCE
WITH
YOUR
LOCAL
LAWS
AND
REGULATIONS.
BATTERY
SAFETY
:
Follow
the polarity(+/-)
diagram
in
the
battery compartment.
Promptly
remove
dead
batteries
from
the
device.
Dispose
of
used
batteries
properly.
Only
batteries
of
the
same
or
equivalent type
as
recommended
are
to
be
used.
DO
NOT
incinerate
used
batteries.
DO
NOT
dispose
of
batteries
in
fire,
as
batteries
may
explode
or
leak.
DO
NOT
mix
old
and
new
batteries
or
types
of
batteries (alkaline/standard).
DO
NOT
use
rechargeable batteries.
DO
NOT
recharge
non-rechargeable batteries.
DO
NOT
short-circuit the
supply
terminals. -2 -
Select Celsius (°C]
or
Fahrenheit
(°F]
The
main unit is capable of
displaying the indoor and
outdoor temperature
readings
in
either 0 c
or
°F.
To
select either 0 c
or
°F,
slide the switch located
within the battery
compartment to the desired
measurement unit.
select
°C
or
°F
temperature
display
Close
Battery
Compartment
Covers
After
you
have
installed fresh batteries and
have
selected
°C
or
°F,
you
may
now close the battery compartment covers
on
both the main unit and the
wireless sensor.
Basic Setup is Now Complete
The
wireless sensor
will
soon send a signal to the main unit and the two
units·
will
be
synchronized. It may take a few minutes for synchronization to
complete. If both
or
one of units appear to
be
functioning improperly, refer
to the troubleshooting section
in
this manual.
( 3 • PLACEMENT )
Now that setup is complete,
you
must choose a location to place the wireless
sensor and the main unit.
The
wireless sensor
MUST
be
placed less than
100
feet from the main unit.
This wireless thermometer uses radio frequency
for
communication, which is
susceptible to interference from other electronic devices and large metallic
items
or
thick walls. Always place both units at least 3 feet away from
appliances (
TV,
microwave, radios, etc.]
or
objects ( large metal surfaces, thick
stone walls, etc.] that may interfere with the wireless communication.
\ I /
-
--o
...
-
/ I
\'
100 feet
maximum
- 3 -
Placement
of Main Unit
Place the main unit in a dry area free
of
dirt
and dust.
To
help ensure
an
accurate indoor temperature
measurement,
be
sure to place the
main unit out of direct sunlight, and
away from any heat sources
or
vents
in your home.
There are 2 placement options
for
the main unit.
You
may hang the
main unit
on
a
wall
using the
integrated hang hole
on
the back.
Alternatively,
you
may use the
detachable "table stand" to place the
main unit
on
a table top
or
other
flat
surface.
Placement
of
Sensor
The wireless sensor
MUST
BE
PLACED
OUTDOORS
to observe
outdoor temperatures and relay the
outdoor temperature to the main unit
display. The wireless sensor must
be
placed less than
100
feet from the
main unit.
The wireless sensor is
water
resistant
and is designed
for
outdoor use.
However, to extend the life of the
product, place the wireless sensor in
an
area protected from direct weather
elements.
To
ensure
an
accurate
outdoor temperature measurement,
be
sure the wireless sensor is placed
out of direct sunlight and away from
any heat sources.
Use the integrated hang hole
on
the
back of the wireless sensor to hang
the sensor
on
a
wall
or
other vertical
surfaces outdoors.
Main
Unit
Detachable Stand
Included with the main unit is a detachable stand for table top placement.
Remove Attach
Wireless
Sensor
Reception
The main unit has
an
wireless signal reception icon
in
the upper left of the outdoor temperature
display. If there are a low number of "bars" ,
present,
you
may experience inaccuracy
or
no
temperature display I
..
__
..
].
In
this case
you
may
need to relocate one
or
both of the units. If most
or
all
4 of the bars are present, wireless reception is
good and
no
action is required.
T
IIII
T
IIII
T
III
I
no
reception
• • • • • • • • • • •• • • ••••
....
_
[ 4 • OPERATION
After the main unit and the wireless sensor are both powered
on
and wirelessly
synchronized,
no
further
input is required. The
thermometer
should provide
accurate temperature and humidity readings if properly set
up
and placed.
Wireless Signal
Reception Indicator
,
...
OF
Outdoor
_,
Temperature-----+----
I
J,Q!,
Outdoor Relative
Humidity
Outdoor Temp.
Daily High
This feature
gives
you
the
recorded highest temperature
in
the last
24-48
hours,
depending
on
when
you
installed the batteries.
IndoorTemperature
----+----.
, %
3relative
humidity
todoysh,gh todays
low
----+-----,.......,,,,.., =,,,...-----
33'F
·Ol'F
,6•~
36~
I
LU
indoor
T
IIII
great
reception
)
Outdoor Temp.
Trend Indicator
The
trend indicator
compares the last
10
minutes temperature with
the previous houraverage.
This reading
will
provide a
direction of where the
temperature
is
heading
(rising, decreasing
or
staying the same!.
Outdoor Temp.
Daily Low
This
feature
gives
you
the
recorded lowest temperature
in
the last 24-48 hours,
depending
on
when
you
installed the batteries.
Indoor Relative
Humidity
Batteries should last approximately one year under
normal
conditions. When
the batteries need replacement, follow the battery installation procedure
outlined in this manual exactly to ensure proper operation.
- 5 --4 -
Placement
of Main Unit
Place the main unit in a dry area free
of
dirt
and dust.
To
help ensure
an
accurate indoor temperature
measurement,
be
sure to place the
main unit out of direct sunlight, and
away from any heat sources
or
vents
in your home.
There are 2 placement options
for
the main unit.
You
may hang the
main unit
on
a
wall
using the
integrated hang hole
on
the back.
Alternatively,
you
may use the
detachable "table stand" to place the
main unit
on
a table top
or
other
flat
surface.
Placement
of
Sensor
The wireless sensor
MUST
BE
PLACED
OUTDOORS
to observe
outdoor temperatures and relay the
outdoor temperature to the main unit
display. The wireless sensor must
be
placed less than
100
feet from the
main unit.
The wireless sensor is
water
resistant
and is designed
for
outdoor use.
However, to extend the life of the
product, place the wireless sensor in
an
area protected from direct weather
elements.
To
ensure
an
accurate
outdoor temperature measurement,
be
sure the wireless sensor is placed
out of direct sunlight and away from
any heat sources.
Use the integrated hang hole
on
the
back of the wireless sensor to hang
the sensor
on
a
wall
or
other vertical
surfaces outdoors.
Main
Unit
Detachable Stand
Included with the main unit is a detachable stand for table top placement.
Remove Attach
Wireless
Sensor
Reception
The main unit has
an
wireless signal reception icon
in
the upper left of the outdoor temperature
display. If there are a low number of "bars" ,
present,
you
may experience inaccuracy
or
no
temperature display I
..
__
..
].
In
this case
you
may
need to relocate one
or
both of the units. If most
or
all
4 of the bars are present, wireless reception is
good and
no
action is required.
T
IIII
T
IIII
T
III
I
no
reception
• • • • • • • • • • •• • • ••••
....
_
[ 4 • OPERATION
After the main unit and the wireless sensor are both powered
on
and wirelessly
synchronized,
no
further
input is required. The
thermometer
should provide
accurate temperature and humidity readings if properly set
up
and placed.
Wireless Signal
Reception Indicator
,
...
OF
Outdoor
_,
Temperature-----+----
I
J,Q!,
Outdoor Relative
Humidity
Outdoor Temp.
Daily High
This feature
gives
you
the
recorded highest temperature
in
the last
24-48
hours,
depending
on
when
you
installed the batteries.
IndoorTemperature
----+----.
, %
3relative
humidity
todoysh,gh todays
low
----+-----,.......,,,,.., =,,,...-----
33'F
·Ol'F
,6•~
36~
I
LU
indoor
T
IIII
great
reception
)
Outdoor Temp.
Trend Indicator
The
trend indicator
compares the last
10
minutes temperature with
the previous houraverage.
This reading
will
provide a
direction of where the
temperature
is
heading
(rising, decreasing
or
staying the same!.
Outdoor Temp.
Daily Low
This
feature
gives
you
the
recorded lowest temperature
in
the last 24-48 hours,
depending
on
when
you
installed the batteries.
Indoor Relative
Humidity
Batteries should last approximately one year under
normal
conditions. When
the batteries need replacement, follow the battery installation procedure
outlined in this manual exactly to ensure proper operation.
- 5 --4 -
Troubleshooting
Problem
Bad Reception
T
Ill
no
bars
No
Outdoor
Temperature
or
Humidity Display
[no communication]
Main Unit
Display Not Working
Set
Wireless
ID
This
wireless thermometer
uses
long
range
433mhz
radio
frequency
for
communication
.
In
the event that
you
have
reception problems due to
interference, both the main
unit and the wireless sensor
have
a selectable wireless
ID.
The
ID
switches are
located within the battery
compartments of the main
unit and the wireless
sensor.
You
may choose
A,
B
or
C;
but both the main units and
the wireless sensors IDs
must match for successful
synchronization.
Possible Solution
Relocate the main unit and/or the wireless
sensor. Both units must
be
within
100
feet
from each other. Make sure both units are
placed at least 3 feet from other electronic
appliances and devices that may interfere
with the wireless communication [such
as
TV's,
microwaves, computers etc).
If wireless reception is
bad
[no bars]. see
..
Bad
Reception" section above. If
reception is O.K.
or
GOOD
[some bars) and
there is
still
no
outdoor readings displayed,
the batteries
in
the wireless sensor may
need to
be
replaced. The wireless
ID
setting
on
each unit must match for both units to
communicate properly.
See
..
Set Wireless
10
:·
Make certain that the batteries are installed
correctly.
The
batteries may need replacing.
both wireless ID's
must
match
-6 -
[ 5 • PRODUCT SPECIFICATIONS ]
Measurement
Ranges
Temperature
Main Unit: 32°F to
122°F
/
o°C
to
50°C
Wireless Sensor: -40°F to 158°F /
-40°[
to
70°[
Humidity
Main Unit:
20%
RH
to
95%
RH
Wireless Sensor:
20%
RH
to
95%
RH
Accuracy:+/
- 5 units
RH
Specifications
Power Requirements
Main Unit: 3 x
..
AA"
alkaline
or
lithium batteries
Wireless Sensor: 2 x
"AA"
alkaline
or
lithium batteries
Wireless Communication
Radio Frequency:
433
mhz
Transmission Intervals: every
16
seconds
Please
DO
NOT return product to the retail store.
For technical assistance
and
product return information, please call
Customer Care: 877-221-1252 Mon. -Fri. 8:00 A.M.
to
4:45 P.M.
(CST)
www.
chaneyi nstrument.com
LIMITED
ONE
YEAR
WARRANTY
Chaney
Instrument
Company
warrants that
all
products it manufactures
to
be
of
good
material
and
workmanship
and
to
be
free
of
defects if properly installed
and
operated for a period of
one
year from date of purchase.
REMEDY
FOR
BREACH
OF
THIS
WARRANTY
IS
EXPRESSLY
LIMITED
TO
REPAIR
OR
REPLACEMENT
OF
DEFECTIVE
ITEMS
.
Any
product which. under normal
use
and
service.
is
proven
to
breach the warranty contained herein within
ONE
YEAR
from date
of
sale will, upon examination
by
Chaney,
and
at
its sole option,
be
repaired
or
replaced
by
Chaney.
In
all
cases,
transportation costs
and
charges for returned
goods shall
be
paid for
by
the purchaser.
Chaney
hereby disclaims all responsibility for such transportation costs
and
charges.
This warranty
will
not
be
breached,
and
Chaney
will
give
no
credit for products it manufactures which shall
have
received normal
wear
and
tear,
been
damaged, tampered, abused. improperly installed, damaged
in
shipping,
or
repaired or altered
by
others than
authorized representatives of
Chaney
.
THE
ABOVE-DESCRIBED
WARRANTY
IS
EXPRESSLY
IN
LIEU
OF
ALL
OTHER
WARRANTIES.
EXPRESS
OR
IMPLIED,
AND
ALL
OTHER
WARRANTIES
ARE
HEREBY
EXPRESSLY
DISCLAIMED
.
INCLUDING
WITHOUT
LIMITATION
THE
IMPLIED
WARRANTY
OF
MERCHANTABILITY
AND
THE
IMPLIED
WARRANTY
OF
FITNESS
FOR
A
PARTICULAR
PURPOSE.
CHANEY
EXPRESSLY
DISCLAIMS
ALL LIBILITY
FOR
SPECIAL,
CONSEQUENTIAL
OR
INCIDENTAL
DAMAGES
.
WHETHER
ARISING
IN
TORT
OR
BY
CONTRACT
FROM
ANY
BREACH
OF
THIS
WARRANTY.
SOME
STATES
DO
NOT
ALLOW
THE
EXCLUSION
OR
LIMITATION
OF
INCIDENTAL
OR
CONSEQUENTIAL
DAMAGES,
SO
THE
ABOVE
LIMITATION
OR
EXCLUSION
MAY
NOT
APPLY
TO
YOU
.
CHANEY
FURTHER
DISCLAIMS
ALL LIABILITY
FROM
PERSONAL
INJURY
RELATING
TO
ITS
PRODUCTS
TO
THE
EXTENT
PERMITTED
BY
LAW.
BY
ACCEPTANCE
OF
ANY
OF
CHANEY'S
EQUIPMENT
OR
PRODUCTS,
THE
PURCHASER
ASSUMES
ALL LIABILITY
FOR
THE
CONSEQUENCES
ARISING
FROM
THEIR
USE
OR
MISUSE.
NO
PERSON.
FIRM
OR
CORPORATION
IS
AUTHORIZED
TO
ASSUME
FOR
CHANEY
ANY
OTHER
LIABILITY
IN
CONNECTION
WITH
THE
SALE
OF
ITS
PRODUCTS.
FURTHERMORE,
NO
PERSON,
FIRM
OR
CORPORATION
IS
AUTHORIZED
TO
MODIFY
OR
WAIVE
THE
TERMS
OF
THIS
PARAGRAPH.
AND
THE
PRECEDING
PARAGRAPH,
UNLESS
DONE
IN
WRITING
AND
SIGNED
BY
A
DULY
AUTHORIZED
AGENT
OF
CHANEY.
THIS
WARRANTY
GIVES
YOU
SPECIFIC
LEGAL
RIGHTS,
AND
YOU
MAY
ALSO
HAVE
OTHER
RIGHTS
WHICH
VARY
FROM
STATE
TO
STATE
.
For
in-warranty
repair,
please
contact
:
Chaney
Customer
Care
Customer
Care
Department 877-221-1252
Chaney
Instrument
Company
Mon-Fri 8:00 a.m.
to
'4:'45
p.m.
CST
965
Wells Street
Lake
Geneva,
WI
53147
www
.chaneyinstrument.com
- 7 -
Troubleshooting
Problem
Bad Reception
T
Ill
no
bars
No
Outdoor
Temperature
or
Humidity Display
[no communication]
Main Unit
Display Not Working
Set
Wireless
ID
This
wireless thermometer
uses
long
range
433mhz
radio
frequency
for
communication
.
In
the event that
you
have
reception problems due to
interference, both the main
unit and the wireless sensor
have
a selectable wireless
ID.
The
ID
switches are
located within the battery
compartments of the main
unit and the wireless
sensor.
You
may choose
A,
B
or
C;
but both the main units and
the wireless sensors IDs
must match for successful
synchronization.
Possible Solution
Relocate the main unit and/or the wireless
sensor. Both units must
be
within
100
feet
from each other. Make sure both units are
placed at least 3 feet from other electronic
appliances and devices that may interfere
with the wireless communication [such
as
TV's,
microwaves, computers etc).
If wireless reception is
bad
[no bars]. see
..
Bad
Reception" section above. If
reception is O.K.
or
GOOD
[some bars) and
there is
still
no
outdoor readings displayed,
the batteries
in
the wireless sensor may
need to
be
replaced. The wireless
ID
setting
on
each unit must match for both units to
communicate properly.
See
..
Set Wireless
10
:·
Make certain that the batteries are installed
correctly.
The
batteries may need replacing.
both wireless ID's
must
match
-6 -
[ 5 • PRODUCT SPECIFICATIONS ]
Measurement
Ranges
Temperature
Main Unit: 32°F to
122°F
/
o°C
to
50°C
Wireless Sensor: -40°F to 158°F /
-40°[
to
70°[
Humidity
Main Unit:
20%
RH
to
95%
RH
Wireless Sensor:
20%
RH
to
95%
RH
Accuracy:+/
- 5 units
RH
Specifications
Power Requirements
Main Unit: 3 x
..
AA"
alkaline
or
lithium batteries
Wireless Sensor: 2 x
"AA"
alkaline
or
lithium batteries
Wireless Communication
Radio Frequency:
433
mhz
Transmission Intervals: every
16
seconds
Please
DO
NOT return product to the retail store.
For technical assistance
and
product return information, please call
Customer Care: 877-221-1252 Mon. -Fri. 8:00 A.M.
to
4:45 P.M.
(CST)
www.
chaneyi nstrument.com
LIMITED
ONE
YEAR
WARRANTY
Chaney
Instrument
Company
warrants that
all
products it manufactures
to
be
of
good
material
and
workmanship
and
to
be
free
of
defects if properly installed
and
operated for a period of
one
year from date of purchase.
REMEDY
FOR
BREACH
OF
THIS
WARRANTY
IS
EXPRESSLY
LIMITED
TO
REPAIR
OR
REPLACEMENT
OF
DEFECTIVE
ITEMS
.
Any
product which. under normal
use
and
service.
is
proven
to
breach the warranty contained herein within
ONE
YEAR
from date
of
sale will, upon examination
by
Chaney,
and
at
its sole option,
be
repaired
or
replaced
by
Chaney.
In
all
cases,
transportation costs
and
charges for returned
goods shall
be
paid for
by
the purchaser.
Chaney
hereby disclaims all responsibility for such transportation costs
and
charges.
This warranty
will
not
be
breached,
and
Chaney
will
give
no
credit for products it manufactures which shall
have
received normal
wear
and
tear,
been
damaged, tampered, abused. improperly installed, damaged
in
shipping,
or
repaired or altered
by
others than
authorized representatives of
Chaney
.
THE
ABOVE-DESCRIBED
WARRANTY
IS
EXPRESSLY
IN
LIEU
OF
ALL
OTHER
WARRANTIES.
EXPRESS
OR
IMPLIED,
AND
ALL
OTHER
WARRANTIES
ARE
HEREBY
EXPRESSLY
DISCLAIMED
.
INCLUDING
WITHOUT
LIMITATION
THE
IMPLIED
WARRANTY
OF
MERCHANTABILITY
AND
THE
IMPLIED
WARRANTY
OF
FITNESS
FOR
A
PARTICULAR
PURPOSE.
CHANEY
EXPRESSLY
DISCLAIMS
ALL LIBILITY
FOR
SPECIAL,
CONSEQUENTIAL
OR
INCIDENTAL
DAMAGES
.
WHETHER
ARISING
IN
TORT
OR
BY
CONTRACT
FROM
ANY
BREACH
OF
THIS
WARRANTY.
SOME
STATES
DO
NOT
ALLOW
THE
EXCLUSION
OR
LIMITATION
OF
INCIDENTAL
OR
CONSEQUENTIAL
DAMAGES,
SO
THE
ABOVE
LIMITATION
OR
EXCLUSION
MAY
NOT
APPLY
TO
YOU
.
CHANEY
FURTHER
DISCLAIMS
ALL LIABILITY
FROM
PERSONAL
INJURY
RELATING
TO
ITS
PRODUCTS
TO
THE
EXTENT
PERMITTED
BY
LAW.
BY
ACCEPTANCE
OF
ANY
OF
CHANEY'S
EQUIPMENT
OR
PRODUCTS,
THE
PURCHASER
ASSUMES
ALL LIABILITY
FOR
THE
CONSEQUENCES
ARISING
FROM
THEIR
USE
OR
MISUSE.
NO
PERSON.
FIRM
OR
CORPORATION
IS
AUTHORIZED
TO
ASSUME
FOR
CHANEY
ANY
OTHER
LIABILITY
IN
CONNECTION
WITH
THE
SALE
OF
ITS
PRODUCTS.
FURTHERMORE,
NO
PERSON,
FIRM
OR
CORPORATION
IS
AUTHORIZED
TO
MODIFY
OR
WAIVE
THE
TERMS
OF
THIS
PARAGRAPH.
AND
THE
PRECEDING
PARAGRAPH,
UNLESS
DONE
IN
WRITING
AND
SIGNED
BY
A
DULY
AUTHORIZED
AGENT
OF
CHANEY.
THIS
WARRANTY
GIVES
YOU
SPECIFIC
LEGAL
RIGHTS,
AND
YOU
MAY
ALSO
HAVE
OTHER
RIGHTS
WHICH
VARY
FROM
STATE
TO
STATE
.
For
in-warranty
repair,
please
contact
:
Chaney
Customer
Care
Customer
Care
Department 877-221-1252
Chaney
Instrument
Company
Mon-Fri 8:00 a.m.
to
'4:'45
p.m.
CST
965
Wells Street
Lake
Geneva,
WI
53147
www
.chaneyinstrument.com
- 7 -
ACU
►
RITE
.
Product
Registration
DESIGNED
TO
WORK
FOR
vou
·
To
receive product information, register
your product online.
Ifs
quick and easy!
Log
on
to
http://www.chaneyinstrument.com/product_reg.htm
ACU
►
RITE®
DESIGNED
TO
WORK
FOR
vou
·
This device complies with part
15
of the
FCC
rules.
Operation is subject to the following two conditions:
1- This device may
NOT
cause
harmful
interference, and
2- This device must accept any interference received,
including interference that may cause undesired operation.
NOTE
:This equipment has
been
tested
and
found to comply with the limits for a Class
B digital device, pursuant to Part
15
of the
FCC
rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses
and
can
radiate radio frequency energy
and, if not installed
and
used
in
accordance with the instructions, may cause harmful
interference
to
radio communications. However,There is
no
guarantee that
interference
will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can
be
determined
by
turning the equipment off
and
on,
the user is encouraged to try to correct the
interference
by
one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and
the receiver.
• Connect the equipment into
an
outlet
on
a circuit different from that
to
which the
receiver is connected.
• Consult the dealer or
an
experienced radio/TV technician for help.
NOTE:
The
manufacturer is not responsible for any radio
or
TV
interference caused
by
unauthorized modifications to this equipment.
Such
modifications could void the user
authority to operate the equipment.
Patent
numbers
: 5,978,738; 6,076,044; 6,597,990
INST
-
00
6
11
0405
07
Instruction Manual
Package Contents:
[1l Main Unit [Al with stand
[1l Wireless Sensor [Bl
[1l Instruction Manual
0 [1l Hardware Bag
What
You
Need:
• Philips Screwdriver
• [5l
AA
batteries
-see "Install Batteries"
A.
Main Unit B. Wireless Sensor
on
page 2
Thank
You
for purchasing this ACURITE®product. This wireless
thermometer
features outdoor temperature and humidity, outdoor temperature memory (daily
high/low), and indoor temperature and humidity. Please read this manual
in
it's
entirety
to
fully enjoy the benefits and features of this product. Please keep this
manual for future reference.
NOTE
: A
clear
film is applied to
the
LCD
at
the
factory
that
must
be removed prior
to using this product. Locate
the
clear
tab and simply
peel
to remove.
( 1 •
OVERVIEW
OF
FEATURES
)
Outdoor
Temp
.
---"-.....;;~
·
Daily
High
today
's
low
36'F
Outdoor
Temp
.
Daily
Low
3
--
6-
o/.
-•
---I.--'---
Indoor Relative
'°' Humidity
- 1 -
Table of contents
Other ACU-RITE Thermometer manuals
ACU-RITE
ACU-RITE 00782 User manual
ACU-RITE
ACU-RITE 02044W User manual
ACU-RITE
ACU-RITE 782 User manual
ACU-RITE
ACU-RITE 00609 User manual
ACU-RITE
ACU-RITE 425 User manual
ACU-RITE
ACU-RITE 00782 User manual
ACU-RITE
ACU-RITE 00398 User manual
ACU-RITE
ACU-RITE 00826 User manual
ACU-RITE
ACU-RITE 01185 User manual
ACU-RITE
ACU-RITE 00826 User manual
ACU-RITE
ACU-RITE 00606 User manual
ACU-RITE
ACU-RITE 01184 User manual
ACU-RITE
ACU-RITE 00782W User manual
ACU-RITE
ACU-RITE 603 User manual
ACU-RITE
ACU-RITE 00209 User manual
ACU-RITE
ACU-RITE 826 User manual
ACU-RITE
ACU-RITE 00754 User manual
ACU-RITE
ACU-RITE 00395W User manual
ACU-RITE
ACU-RITE 00683A3 User manual
ACU-RITE
ACU-RITE 754 User manual
