ACV 381130-07 User manual

2
31
4
Installation Manual Double DIN Kit
7. Place the new facia plate.
Fix it with two screws (see arrows)
Push the metal frame into the
facia plate
8. Connect all required circuit points
and push the double DIN head
unit in the metal frame until it
snaps in.
Place the trim frame
Reinstall everything in
reverse order
© 5/2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Compatible with double DIN devices
Installation Manual
Double DIN Kit
Standard: 381130-07
Rubber-Touch: 391130-07
• Honda CR-V 2006 ->
Double DIN Set contents
• (1) Metal Frame
• (2) Installation Kit
• (3) Facia Plate
• (4) Trim Frame
Mount the metal brackets with
the double DIN head unit
The position of the copper
coloured holder can be adjusted
to your needs for perfect t.
(see sample)

Installation Manual Double DIN Kit 381130-07 / 391130-07
3. Remove the two screws
below the OEM head unit
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Honda CR-V with OEM head unit
2. Unclip the air condition control
unit and remove it
4. Remove the air vent unit
5. Remove the two screws
above the OEM head unit
6. Remove the OEM head unit