ACV 381178-24 User manual

© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
12. Install everything in reverse order
to nish installation
11. Mount facia plate to OEM panel
9. Remove screws of OEM radio
Take out OEM radio
(pull out plugs carefully)
10. Fix mounting brackets to
Double DIN Navigation
Connect all required circuit
points of Double DIN
Navigation
Place it on dashbord. Fix it
with OEM screws
Kia Sorento 2010->
Compatible with these double DIN devices
Double DIN Navigation
Installation Manual
Double DIN Kit
381178-24
2
1
(1) Facia Plate
(2) Mounting brackets (left / right)

2. Remove screws
1. Remove plastic rivets at left
and right side. remove panels
4. Pull hand brake at
highest position
Pull gear lever towards
your direction
Pull center console towards your
direction as much as possible
3. Remove plastic cover
remove 3 screws
5. Unclip panel holding the
cigarette lighter and remove it
(pull out plugs carefully)
6. Remove 2 screws which
became visible
7. Remove center panel (pull
out plug at top carefully!)
8. Remove screws of air condition
control unit and remove it
(pull out plugs carefully)