ACV 381250-15 Series User manual

© 08/2012 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Compatible with these double DIN devices
Double DIN Navigation
Nissan N400 2010->
Opel Movano 2010->
Renault Master III 2010->
Installation Manual
Double DIN Kit
colour: black part-no.
2-DIN 381250-15-x
2-DIN with pocket 281250-15-x
1
2
4
3
4
• (1) facia plate
• (2) metal frame right
• (3) metal frame left
• (4) at headed screw
pocket (only 281250-15-x)

1. Sample dashboard photo
with 1-DIN or OEM radio
Remove radio with relase keys
(unplug all connectors carefully
2. Remove 2 screws at the
left side beside the shift knob
3. Remove 2 screws at the
right side beside the
cup holder unit
4. Pull panel with shift knob
towards your direction.
Remove 4 screws (see arrows)

All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
14. Fix new 2-DIN head unit
Connect all required connectors
Plate center console
Re-install everything in reverse
order to nish installation
© 09/2015 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
5. Remove pocket
above radio frame
(unplug all connectors carefully)
Remove pocket at left side
6. Remove screws at the right and
left side behind radio frame
7. Remove complete panel
by pulling it towards your
direction
8. Unplug all all connectors from
the air condition control unit
carefully
9. Remove 4 screws of
air condition control unit
(see arrows)
Remove air condition
control unit

10. Cut center bridge in order to
clear space for 2-DIN facia plate
13. Attach air condition control
unit to center cosole. Put metal
frames over air condition control
unit - attach 2-DIN facia plate
Fix everything with the
appropriate screws
detail
14a.Attach 2-DIN head unit to
brackets*
We recommend a distance about
34 mm (see graphic)
14b.Attach 1-DIN head unit and
pocket to brackets*
We recommend a distance about
31 mm (see graphic)
2-DIN head unit
1-DIN head unit
~34 mm
pre-assembly Brackets
Unit front surface
~31 mm
pre-assembly Brackets
Unit front surface
11. This bridge on the rear side of
the OEM panel needs to be
removed in order to attach the
mounting brackets (see arrows)
12. Cut bridge on both sides in
order to get a plain surface