BMW 84 64 0 441 949 User manual

01 29 2 210 822 4/2011© BMW AG, Munich (Z/Z) 1
Original BMW Accessories.
Installation Instructions.
4/2011
Basic Bluetooth Hands-Free Kit Retrofit
Basic Bluetooth hands-free kit with USB/audio interface retrofit
BMW 3 Series (E90, E91) built after 09/2010
BMW 3 Series (E92, E93) built after 03/2010
Installation instructions only valid for cars with SA 606 (Business navigation system) without SA 6FL
or SA 609 (Professional navigation system) without SA 6FL
Retrofit kit number
84 64 0 441 949 Basic Bluetooth Hands-Free Kit
65 41 2 152 528 Basic Bluetooth hands-free kit with USB/audio interface
Installation time
The installation time for the basic Bluetooth hands-free kit is approx. 1.5 hours.
The installation time for the basic Bluetooth hands-free kit with USB/audio interface is approx. 2.0 hours.
This may vary depending on the condition of the car and the equipment in it. On cars without the the fibre-optic
cable distributor station, the installation time will increase by approx. 0.5 hours.
The installation time specified does not include the time spent on programming/coding.
The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs
(no invoicing via warranty).
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
In the event of any installation or functional problems, restrict the troubleshooting session to about
0.5 hours for mechanical work or 1 hour for electrical work.
To avoid unnecessary extra work and/or costs, an inquiry is to be sent straight away to the technical parts support
via the After Sales Assistance Portal (ASAP).
Quote the following information:
- Chassis number,
- retrofit kit part number,
- a detailed description of the problem,
- any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made via ASAP!
© BMW AG, Munich 01 29 2 210 822 (Z/Z)

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 2
Pictograms
Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or warning text.
Installation information
When routing fibre-optic cables, make sure the bending radius is no less than 25 mm.
Refer to the instructions for handling fibre optic cables as per ISTA 61 00 ....
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this
will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
Program/encode the retrofit with ISSS (Integrated Software Service Station) via the – Conversions – path.
When installing the basic Bluetooth hands-free kit with USB/audio interface retrofit kit, two coding operations
(combox retrofit SA 644, USB/audio (SA 6FL) retrofit) must be carried out.
Ordering instructions
The following parts are not supplied with the retrofit kit and must be therefore ordered separately
(see EPC for part number and details).
-Combox D
-Combox holder E
- Hands-free microphone O (only on E93 cars)
- Steering column shroud R (only on E93 cars)
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit:
SA 606 Business navigation system
SA 609 Professional navigation system
SA 6FL USB/audio interface
Special tools required
00 9 317, Installation wedge
!

Table of contents
Section Page
© BMW AG, Munich 301 29 2 210 822 4/2011 (Z/Z)
1 Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 USB wiring harness connection diagram (only when installing the basic Bluetooth hands-free kit
with USB/audio interface retrofit kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 Wiring harness on the radio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 Installing and connecting the combox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 Installing and connecting the USB/AUX-IN jack (only when installing the
basic Bluetooth hands-free kit with USB/audio interface retrofit kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9 Installing and connecting the Bluetooth aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Installing and connecting the hands-free microphone (E90, E91, E92 cars only) . . . . . . . . . . . . . . . . . . . . . 16
11 Installing and connecting the hands-free microphone (E93 cars only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12 Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
13 Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
14 Pairing the mobile phone with the car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 4
Legend
AWiring harness
BBluetooth aerial
CHands-free microphone (E90, E91, E92 cars only)
DCombox (not supplied with the retrofit kit)
ECombox holder (not supplied with the retrofit kit)
FHands-free microphone finisher (2 x, dependent on colour, for cars without roof function centre only)
GOval-headed screw (ST4, 2 x 13 mm)
HHexagon screw (M5x20mm, 4x)
IHexagon nut (M5, 4 x)
JSW 4-pin socket casing
KAdhesive strips (80 x 15 mm)
LCable tie (10 x)
MTemplate (for cars without roof function centre only)
NBluetooth aerial connecting cable
OHands-free microphone (E93 cars only, not supplied with the retrofit kit)
PAdapter cable (E93 cars only)
QInstallation frame (E90, E91, E92 cars only)
RSteering column shroud (E93 cars only, not supplied with the retrofit kit)
SCover cap
T26-pin socket casing
UUSB cable (to be given to the customer)
A
I J K L MHGF
ON P Q R S T U
B C D E
090 1578 Z
1. Parts list

1. Parts list
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 5
Legend
UUSB wiring harness (only included in the basic Bluetooth hands-free kit with USB/audio interface retrofit kit)
VUSB/AUX-IN jack (only included in the basic Bluetooth hands-free kit with USB/audio interface retrofit kit)
WBL 54-pin socket casing (only included in the basic Bluetooth hands-free kit with
USB/audio interface retrofit kit, not required)
AUX
IN
W
V
U
090 1397 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 6
ISTA No.
Conduct a brief test ---
Disconnect the negative pole of the battery 61 20 900
The following components must be removed first of all
All cars
Glove box 51 16 366
Side A pillar trim, footwell right 51 43 070
Radio receiver 65 83 010
Dashboard side trim, right 51 45 ...
Pedal trim (only cars without Flash adapter built after 09/08) 51 45 185
Release the centre console (only when installing the basic Bluetooth hands-free kit with
USB/audio interface retrofit kit)
---
AUX-IN jack (only when installing the basic Bluetooth hands-free kit with USB/audio interface
retrofit kit)
---
E90, E91, E92 cars only
A pillar trim on the right 51 43 148
Roof function centre/front interior light 61 31 043
E93 cars only
Steering column shroud 32 31 003
2. Preparatory work

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 7
Item Designation Signal Cable colour/
Cross-section
Connection location in the car Abbreviation/
Slot
A Wiring harness --- --- --- ---
A1 Socket contact Terminal 30 RT/GN
2.5 mm2
On radio receiver X13812
PIN 15
A2 Socket contact Terminal 31 BR
2.5 mm2
On radio receiver X13812
PIN 12
A3 SW 4-pin pin housing --- --- On socket casing J---
A4 Fibre-optic cable MOST OR On radio receiver X13815
PIN 2
A5 Fibre-optic cable connector MOST GN On the radio receiver's disconnected fibre optic cable ---
A6 SW 2-pin fibre-optic cable casing MOST --- On combox DX34139
A7 52-pin socket casing --- --- On combox DX34130
A8 SW 3-pin socket casing Mic
---
E90, E91, E92 cars only
On hands-free microphone C
On branch P2
X3564
N Bluetooth aerial connecting cable --- --- --- ---
N1 Fakra socket casing, GN BT aer --- On combox DX34128
N2 Fakra socket casing, GN BT aer --- On Bluetooth aerial BX14080
--- --- --- --- --- ---
P Adapter cable --- --- E93 cars only ---
P1 SW 3-pin pin housing Mic --- On hands-free microphone O---
P2 SW 3-pin pin housing Mic --- On branch A8 X3564
A1
A2
A5
A8
A6
A3
A4
A7
N1 N2
N P
A
P1 P2
090 1547 Z
3. Connection diagram

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 8
Item Designation Signal Cable colour/
Cross-section
Connection location in the car Abbreviation/
Slot
U USB wiring harness --- --- --- ---
U1 WS 4-pin HSD socket casing --- --- Connection to USB/AUX-IN jack VX17183
U2 SW 4-pin socket casing --- --- Connection to USB/AUX-IN jack V X14118
U3 Socket contact Shield Shield
0.35 mm2
In socket casing TPIN 22
U4 Socket contact AUX_NF_GND WS/GN
0.35 mm2
In socket casing TPIN 10
U5 Socket contact AUX_NF_R WS/RT
0.35 mm2
In socket casing TPIN 24
U6 Socket contact AUX_NF_L VI
0.35 mm2
In socket casing TPIN 23
U7 SW 4-pin HSD socket casing --- --- On combox DX34135
U USB wiring harness --- --- --- ---
U1
U2
U3
U4
U5
U6
U7
U
090 1398
4. USB wiring harness connection diagram (only when installing the
basic Bluetooth hands-free kit with USB/audio interface retrofit kit)

5. Installation and cabling diagram
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 9
Legend
AWiring harness
BBluetooth aerial
CHands-free microphone (E90, E91, E92 cars only)
DCombox
NBluetooth aerial connecting cable
OHands-free microphone (E93 cars only)
PAdapter cable (E93 cars only)
UUSB wiring harness (only when installing the basic Bluetooth hands-free kit with
USB/audio interface retrofit kit)
VUSB/AUX-IN jack (only when installing the basic Bluetooth hands-free kit with
USB/audio interface retrofit kit)
1Radio connectors X13812 and X13815
V
O
1U
D
B
A
N
A
C
P
090 1553 Z
5. Installation and cabling diagram

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 10
6. Wiring harness on radio receiver
Disconnect the following cables from plug X13812
(SW 16-pin) of the radio receiver and connect to socket
casing J:
- Cable, RT/GN cable, from PIN 15
to socket casing J PIN 1
- Cable, BR cable from PIN 12
to socket casing J PIN 2
Connect branches A1 and A2 to plug X13812 as
follows:
- Branch A1, RT/GN cable, to PIN 15
-BranchA2, BR cable, to PIN 12
Connect branch A3 to socket casing J.
Unclip fibre optic cable casing X13815 (SW 2-pin) from
plug X13812 (SW 16-pin) of the radio receiver.
Disconnect the outgoing fibre-optic cable from fibre-optic
cable casing X13815 PIN 2 and connect branch A4,
OR cable.
Clip fibre-optic cable casing X13815 into plug X13812.
Unlock the fibre-optic cable connector (1) on branch A5
and connect the disconnected fibre optic cable (2).
Connect plug X13812 (SW 16-pin) to the radio receiver.
X13812
A3
A2 A1
J
082 0086 Z

X13812
X13815
A4
A4
087 0637 Z
X13812
A5
A5
2
1
087 0654 Z

7. Installing and connecting the combox
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 11
7. Installing and connecting the combox
Only when installing the basic Bluetooth hands-
free kit with USB/audio interface retrofit kit
Connect branches U3–U6 as follows to 26-pin socket
casing T:
- Branch U3, shield, to PIN 22
-BranchU4, WS/GN cable, to PIN 10
- Branch U5, WS/RT cable, to PIN 24
-BranchU6, VI cable, to PIN 23
- Slide cover cap S onto socket casing T and connect to
combox D.
All cars
Disconnect the cables as follows from branch A7 and
connect to socket casing T:
- From PIN 1 to PIN 25
- From PIN 19 to PIN 12
- From PIN 21 to PIN 11
- From PIN 36 to PIN 14
- From PIN 17 to PIN 1
Only cars without cup holders in the dashboard
The 26-pin connection (1) must point in the
direction shown.
Screw combox D using hexagon screws H and hexagon
nuts I to combox mount E.
Only cars with cup holders in the dashboard
The 26-pin connection (1) must point in the
direction shown.
Secure combox D using hexagon screws H, hexagon nuts
I and two cable ties L to combox mount E.
U3-U6
T S
090 1559 Z
A7
090 1558 Z
I/H
E
D
1
090 1574 Z
I/H DL
E
1
090 1575 Z

7. Installing and connecting the combox
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 12
All cars
Make 2 drill holes (2) of diameter 4 mm at the points indicated in the dashboard.
The left-hand fastening point of the glove compartment (1) serves as the starting point.
Route branches A6 and A7 to the glove compartment installation site.
Route branch U7 to the glove compartment installation site (only when installing the basic Bluetooth hands-free kit
with USB/audio interface retrofit kit).
Connect the following branches to combox D:
-Branch A6 (SW 2-pin fibre optic cable casing)
-Branch S (GN 26-pin socket casing)
Branch U7 (SW 4-pin HSD socket casing, only when installing the basic Bluetooth hands-free kit with
USB/audio interface retrofit kit).
1
A6
U7
D
2
S/T
68mm 157mm
090 1576 Z

7. Installing and connecting the combox
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 13
Only secure combox holder E in place once the glove compartment has been pushed onto the dashboard
frame.
Push combox holder E onto the dashboard frame. The left-hand edge (2) of combox holder E must lie flush with
the left-hand edge of the strut (1). Loosely fasten combox holderE to the two drill holes (1) made previously using
oval-headed screws G.
Separate the rib (1) from the glove compartment (2).
1
G1
2
E
090 1577 Z
1
2
090 1314 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 14
8. Installing and connecting the USB/AUX-IN jack (only when installing the basic
Bluetooth hands-free kit with USB/audio interface retrofit kit)
Route branches U1 (WS 4-pin HSD socket casing) and
U2 (SW 4-pin socket casing) of USB wiring harness U
under the centre console to the installation site of
USB/AUX-IN jack V.
Connect branches U1 and U2 to USB/AUX-IN jack V.
Clip USB/AUX-IN jack V into the centre console.
E65
U1
U2
U
V
090 1406 Z
AUX
IN
V
U1
U2
090 1400 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 15
9. Installing and connecting the Bluetooth aerial
The adhesive surfaces must be free from oil and
grease. To ensure a permanent bond, ensure you
observe the colour coding of the adhesive strip.
Cut the adhesive strips K into two 40 mm-long pieces.
Remove the brown film from both pieces and stick them
to the metal side of the Bluetooth aerial B.
Remove the white film from both pieces and stick
Bluetooth aerial B onto the back of the glove compart-
ment (1).
Connect branch N1 of the Bluetooth aerial connecting
cable N to Bluetooth aerial B.
To connect branch N2 grasp it through the side
opening on the dashboard.
Push the glove compartment (1) onto the dashboard
frame (2) and connect branch N2 of Bluetooth aerial
connecting cable N to combox D.
Tighten oval-headed screws G.
Install the glove compartment (1) as per ISTA.
1
N1
N
B
K
090 1298 Z
N2
D
1
2
N
090 1308 Z
1
G
090 1307 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 16
10. Installing and connecting the hands-free microphone (E90, E91, E92 cars only)
Ensure that branch A8 is routed behind the head
airbag.
Route branch A8 (3-pin SW socket casing) along the
standard wiring harness to the right-hand A pillar and
secure in place with cable ties L.
Route branch A8 to the interior light.
Cars with roof function centre and with SA 620
only
Disconnect plug X3564 from hands-free micro-
phone (1) and tie back.
Connect branch A8 to hands-free microphone (1).
Hands-free microphone C is not required.
Cars with roof function centre and without SA 620
only
The arrow on the hands-free microphone C must
point to the front of the car after it has been
installed.
Clip hands-free microphone C into the roof function
centre (1).
Connect branch A8 to hands-free microphone C.
Cars without roof function centre only
Use only template M.
Cut out the marked area on template M and place it on
the interior light (1).
Mark the contours of the cut-out (2) for the hands-free
microphone and cut out the headlining (3).
A8
L
A8
090 1306 Z
!
1
A8
X3564
091 0278 Z
1
C
A8
090 1305 Z
3
M2
1
082 0095 Z

10. Installing and connecting the hands-free microphone (E90, E91, E92 cars only)
4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 17
Insert the installation frame Q from above into the
opening (1) in the headlining (2) and bend the retaining
lugs (3).
Clip hands-free microphone C into hands-free micro-
phone cover F.
The arrow on the hands-free microphone C must
point to the front of the car after it has been
installed.
Guide branch A8 through the installation frame Q and
connect to hands-free microphone C.
Clip hands-free microphone finisher F into installation
frame G.
2
1
3
Q
082 0096 Z
C
F
082 0097 Z
C
F
A8
Q
090 1304 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 18
11. Installing and connecting the hands-free microphone (E93 cars only)
Cars with SA 620 only
Disconnect plug X3564 from hands-free microphone (1)
and tie back.
Connect branch P1 (SW 3-pin pin housing) to hands-free
microphone (1).
Hands-free microphone O and steering column shroud R
are not required.
Cars without SA 620 only
Unclip the left finisher (1) from the steering column
shroud R.
Connect branch P1 (SW 3-pin pin housing) to hands-free
microphone O and clip into steering column shroud R.
All cars
Route branch A8 (SW 3-pin socket casing) on the right-
hand side of the steering column and connect it to
branch P2 (SW 3-pin pin housing).
Install the steering column shroud (not shown).
1
P1
X3564
093 0187 Z
O
R
1
P1
093 0160 Z
A8
P2
093 0161 Z

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 19
12. Concluding work and coding
The retrofit system requires programming/coding.
- Connect the battery
- Carry out a vehicle test using the ISTA system and note or work through any entered error memory
- Change in the ISTA/P car programming
- Select the “Basic Bluetooth hands-free kit” retrofit via the – Conversion – path and work through the created
action plan.
When installing the basic Bluetooth hands-free kit retrofit kit, retrofit (SA 644) coding must be
carried out.
When installing the basic Bluetooth hands-free kit with USB/audio interface retrofit kit, two
coding operations (combox retrofit SA 644, USB/audio (SA 6FL) retrofit) must be carried out.
- If using ISTA/P, please note the instructions in the ISTA/P application documentation
- Pair the mobile phone with the car (see section 15 or 16)
- Carry out a functional test of the basic Bluetooth hands-free kit
- Re-fit the car components as required

4/201101 29 2 210 822© BMW AG, Munich (Z/Z) 20
13. Wiring diagram
Cable colours
BL Blue GR Grey RT Red
BO Bordeaux (Burgundy) L-GN Light green SW Black
BR Brown NT Natural TR Transparent
GE Yellow OR Orange VI Violet
GN Green RO Pink WS White
0,14 BL
0,14 GN 0,14 OR
0,35 WS/GN
0,35 WS/RT
0,35 VI
0,14 BR
22 10 24 23
34
2
1
123 4
1
432
V*
X34130
A7*
X34128
N1*
X34139
A6*
X34130
A7*
1
B402/C* W18/B*
U500/D*
X3564
A8*
211
12 1125
X14080
N2*
0.35
GE
0.35
SW
MIC(-)
MIC(+)
Schirm
12
15 X13812
A1*
U3*-U6*
30
2.5
RT/GN
31
2.5
BR
A2*
12
X60681
X14118/U2*
/A3*
12
2.5
RT/GN
2.5
BR
GN OR
A5*
X13815
A4*
1
14
J*
2.5
RT/GN
2.5
BR
12
X13016
X1716
2
GN
B402/O*
12 1125
MIC(-)
MIC(+)
12
12
12
12
0.35
GE
0.35
SW
0.35
GE
0.35
SW
X3564
A8*
Schirm
Schirm
Schirm
X34130
P1*
P2*
A7*
X17183/U1*
X34135/U7*
090 1549 Z