EAST COAST Clara User guide

Clara
Dresser
Assembly and care
instructions

Parts
Hardware
IMPORTANT. RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
Thank you for purchasing an East Coast product. It’s been carefully designed and constructed to oer
quality, safety and reliability for you and your baby.
If you have a query about this product or require replacement parts, please contact 01692 408802.
Your child’s safety is your responsibility. Keep children clear during assembly as the fittings pack contains
small parts which may present a choking hazard. Please read the instructions and warnings carefully before
use.
Lay out the parts on a soft level surface and compare to the parts checklist. Don’t throw away any
packaging until you’re sure that you have all the parts.
You will need the following tools to complete assembly:
Flat-headed screwdriver.
Shelf x 3
Lower crossbar x 4
Upper rear crossbar
Upper front crossbar
A x 12
B x 12
C x 12
Hexagon Key
Side (Plain)
Side (With rail)
2

Assembly 1
Assembly 2
NOTE: Ensure parts B are
inserted into the holes in
the crossbars with the
slots visible and aligned
with the holes in their
ends.
A x 3
C x 3
B x 3
Side
Upper rear crossbar
Lower crossbar
Lower crossbar
Shelf
3

Assembly 3
Assembly 4
A x 3
C x 3
B x 3
Upper front crossbar
Lower crossbar
A x 6
B x 6
C x 6
NOTE: Some position arrows are not
shown for clarity.
Attach the side using 6 each of A, B
and C as in previous steps.
Side
4

5636-2016-1
For customer care or enquiries:
Call: 01692 408802
Email: [e-mail]
East Coast Nursery Ltd. Robertson House, North Walsham,
Norfolk, NR28 0BX
eastcoastnursery.co.uk
Care and maintenance
In use
All assembly fittings should be tightened properly and should be checked regularly and re-tightened as
necessary. Take care when moving the furniture, as careless handling may cause damage.
Cleaning is simple; just wipe over with a damp cloth, and avoid using strong detergents or abrasives.
An occasional light application of a wax polish will help maintain the finish.
Warning: Do not leave your child unattended.
Ensure that all fittings are tightened properly. Loose screws could allow a child to trap a part of their
body or clothing, posing a strangulation risk.
Be aware of the risks of open fires and other such sources of strong heat, such as electric bar fires, gas
fires, etc. in the near vicinity of the dresser.
Suitable for use with a flat changing mat up to 75 x 45 cm which does not compromise the eective
height of the changer barriers.
The changing area is suitable for use up to 12 months old or 11kg in weight.
Do not use the dresser if any of the parts are broken, torn or missing.
Any additional or replacement parts can only be obtained from the manufacturer or the distributor.