ADLINK Technology NuPRO-796 Series User manual

Advance Technologies; Automate the World.
Manual Rev. 2.00
Revision Date: August 20, 2006
Part No: 50-13051-1000
NuPRO-796
ETX PICMG 1.0
Half-Size SBC
User’s Manual

Copyright 2006 ADLINK TECHNOLOGY INC.
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

Getting Service from ADLINK
Customer Satisfaction is top priority for ADLINK Technology Inc.
Please contact us should you require any service or assistance.
ADLINK TECHNOLOGY INC.
Web Site: http://www.adlinktech.com
Sales & Service: [email protected]
TEL: [phone]
FAX: [phone]
Address: 9F, No. 166, Jian Yi Road, Chungho City,
Taipei, 235 Taiwan
Please email or FAX this completed service form for prompt and
satisfactory service.
Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX:
Web Site
Product Information
Product Model
Environment
OS:
M/B: CPU:
Chipset: Bios:
Please give a detailed description of the problem(s):

Table of Contents i
Table of Contents
1 Introduction ........................................................................ 1
1.1 Product Overview ................................................................ 1
1.2 Unpacking Checklist ............................................................ 1
1.3 Specifications....................................................................... 2
Display (CRT + LVDS) .................................................... 3
Multi I/O .......................................................................... 3
Audio .............................................................................. 3
LAN ................................................................................. 4
Mechanical and Environmental ....................................... 4
1.4 NuPRO-796 Functional Diagram ......................................... 5
1.5 NuPRO-796 Mechanical Diagram ....................................... 6
2 Connectors and Jumpers.................................................. 7
2.1 Connector Pin Assignments ................................................ 7
VGA Connector (CN10) .................................................. 8
USB Connector (CN17, CN22) ....................................... 8
Keyboard and Mouse (CN11) ......................................... 8
COM Pin Header (CN15, CN16) ..................................... 9
Parallel Port (CN1) .......................................................... 9
IDE (CN4) ..................................................................... 10
USB Pin Header (CN24) ............................................... 11
Serial ATA Connector (CN5, CN7, CN9, CN14) ........... 11
LDVS Connector (CN19) .............................................. 12
Miscellaneous Connector (CN18) ................................. 13
Fan Connector (CN20) ................................................. 13
Audio-Out Pin Header (CN26) ...................................... 13
ATX Power Connector (CN29) ..................................... 14
ETX Connector ............................................................. 14
ETX X1 Connector (PCI Bus, USB, Audio) ................... 15
ETX X2 Connector (ISA Bus) ....................................... 16
ETX X3 Connector (Video, COM, misc. I/O) ................. 17
ETX X4 Connector (Ethernet, IDE, Power, I2C & SMB) 18
2.2 Jumper Settings................................................................. 19
Panel Power Selection (JP3) ........................................ 19
3 System Resources ........................................................... 21
3.1 System Memory Map......................................................... 21
3.2 Direct Memory Access Channels ...................................... 21

ii Table of Contents
3.3 I/O Map .............................................................................. 22
3.4 Interrupt Request (IRQ) Lines............................................ 23
3.5 PCI Configuration Space Map ........................................... 24
3.6 PCI Interrupt Routing Map ................................................ 24
3.7 System Management Bus and I2C Bus ............................. 24
4 Phoenix Award BIOS ........................................................ 25
4.1 Description ......................................................................... 25
4.2 Main Menu ......................................................................... 26
4.3 Standard CMOS Features ................................................. 27
4.4 Advanced BIOS Features .................................................. 31
CPU Internal Cache ...................................................... 31
Quick Power On Self Test ............................................ 31
First/Second/Third Boot Device .................................... 32
Boot Other Device ........................................................ 32
Boot Up NumLock Status ............................................. 32
Gate A20 Option ........................................................... 32
Typematic Rate Setting ................................................ 33
Typematic Rate (Chars/Sec) ........................................ 33
Typematic Delay (Msec) ............................................... 33
Security Option ............................................................. 33
OS Select For DRAM > 64MB ...................................... 33
Console Redirection ..................................................... 34
Baudrate ....................................................................... 34
Agent Connect via ........................................................ 34
Agent wait time(min) ..................................................... 34
Agent after boot ............................................................ 34
Summary Screen Show ................................................ 34
Console Redirection ..................................................... 34
Baud Rate ..................................................................... 34
Agent Connect via ........................................................ 35
Agent Wait Time(min) ................................................... 35
Agent after boot ............................................................ 35
Summary Screen Show ................................................ 35
4.5 Advanced Chipset Features............................................... 36
Video Memory Size ....................................................... 36
Flat Panel Configuration ............................................... 36
Onboard Audio .............................................................. 37
4.6 Integrated Peripherals........................................................ 38
OnChip IDE Channel 0/1 .............................................. 38

Table of Contents iii
Master/Slave PIO .......................................................... 38
IDE Primary Master/Slave UDMA ................................. 39
IDE HDD Block Mode ................................................... 39
Onboard Serial Port 1 & 2 ............................................. 39
UART Mode Select ....................................................... 39
LPT1 Setting / FDD ....................................................... 39
ECP Mode Use DMA .................................................... 39
4.7 PnP/PCI Configurations..................................................... 40
Init Display First ............................................................ 40
Reset Configuration Data ............................................. 40
Resource Controlled By ................................................ 41
IRQ Resources ............................................................. 41
DMA Resources ........................................................... 42
Memory Resources ....................................................... 43
PCI VGA Palette Snoop ................................................ 43
4.8 PC Health Status ............................................................... 44
Current System Temp. .................................................. 44
Current CPU1 Temp. .................................................... 44
Vcore, VCC, VBAT, 3.3 VSB, 2.5 V and 5V ................. 44
4.9 BIOS POST Messages ..................................................... 45
POST Beep .................................................................. 45
Error Messages ............................................................ 45
4.10 BIOS POST Codes ............................................................ 48
Normal POST Codes ................................................... 48
5 Watchdog Timer ............................................................... 57
6 Appendix........................................................................... 61
6.1 Onboard DIP switch........................................................... 61
Location & Function ...................................................... 61
Onboard CF Card setting .............................................. 61
Flat Panel / CRT settings .............................................. 62

iv List of Figures
List of Figures
Figure 1-1: NuPRO-796 Block Diagram....................................... 5
Figure 1-2: NuPRO-796 Carrier Board Layout............................. 6

Introduction 1
1 Introduction
1.1 Product Overview
The NuPRO-796 ETX-based single board computer is comprised
of the ProCB-796, a PICMG 1.0 compliant half-size carrier board,
and the ETX-GX2 ETX module.
The ProCB-796 carrier board includes common PC peripheral I/O
interfaces such as serial and parallel ports, keyboard/mouse,
Ethernet, IDE, VGA, and audio. It also includes an integrated
debug port, SATA controller with RAID, hardware monitor, GPIO,
and audio power amplifier and is expandable via the PCI bus.
The ETX-GX2 core module consists of an AMD Geode™
[email protected]W processor and AMD Geode™ CS5535 companion
device.
The NuPRO-796 supports DDR based SODIMM’s, ensuring long
term availability and stable pricing for SODIMM parts in projects
that will have a long production life, when compared to SDRAM-
based SODIMMS. Memory can be soldered on board as 128MB,
and/or can be inserted in the onboard 200-pin SODIMM socket
that accept up to 512MB DDR SODIMMs.
The NuPRO-796 also includes an integrated 10/100Base-T Ether-
net port, a watchdog timer, and support for LVDS based flat panel
displays.
1.2 Unpacking Checklist
Check the shipping carton for any damage. If the shipping carton
and contents are damaged, notify the dealer for a replacement.
Retain the shipping carton and packing materials for inspection by
the dealer. Obtain authorization before returning any product to
ADLINK.
Check the following items are included in the package, if there are
any items missing, please contact your dealer:
Included Items
All-In-One Driver CD

2Introduction
Note: The packaging of the NuPRO-796 OEM version with
non-standard configuration, functionality, or package
may vary according to different configuration re-
quests.
CAUTION: The NuPRO-796 SBC must be protected from static
discharge and physical shock. Never remove any of
the socketed parts except at a static-free workstation.
Use the anti-static bag shipped with the product to
handle the board. Wear a grounded wrist strap when
servicing.
1.3 Specifications
XEmbedded Processor: AMD Geode™ GX 533 @ 1.1W
soldered onboard.
XCarrier Board: ProCB-796
XChipset: Geode CS5535 companion device
XMemory: 128MB of soldered onboard DDR266 memory
and one 200-pin socket for additional, up to 512 MB
DDR266 SODIMM
XCache: 32Kbyte L1 cache (16K instruction and 16K data)
XEnhanced IDE: one port for up to 2 ATAPI devices, sup-
ports PIO Mode 4 and ATA-5 Ultra DMA66
XBIOS: AWARD 2 Mb Flash BIOS with ACPI and APM 1.2
power management with console redirection and CMOS
backup in onboard EEPROM
XSerial ATA: onboard Silicon Image SiI3114 supports 4-
channel SATA-150 hard drivers with RAID 0, RAID 1 &
RAID 0+1
Warning: The SATA interface of NuPRO-796 is used for only
storage application but not Boot-Up device due to the
specification limitation of SATA controller SiI3114. An
NuPRO-796 carrier board with ETX-GX2 module
This user manual
Printer and COM port cable bracket
ATA-100 cable (x1)
SATA cable kit (x2)
Included Items