ADLINK Technology NuPRO-841 User manual

Advance Technologies; Automate the World.
Manual Rev. 2.00
Revision Date: January 3, 2005
Part No:
NuPRO-841
Full-Size SBC
User’s Manual

Copyright 2005 ADLINK TECHNOLOGY INC.
All Rights Reserved.
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

Getting Service from ADLINK
Customer Satisfaction is top priority for ADLINK Technology Inc.
Please contact us should you require any service or assistance.
ADLINK TECHNOLOGY INC.
Web Site: http://www.adlinktech.com
Sales & Service: [email protected]
TEL: [phone]
FAX: [phone]
Address: 9F, No. 166, Jian Yi Road, Chungho City,
Taipei, 235 Taiwan
Please email or FAX this completed service form for prompt and
satisfactory service.
Company Information
Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX:
Web Site
Product Information
Product Model
Environment
OS:
M/B: CPU:
Chipset: Bios:
Please give a detailed description of the problem(s):

Table of Contents i
Table of Contents
Table of Contents..................................................................... i
List of Tables......................................................................... vii
List of Figures ........................................................................ ix
1 Introduction ........................................................................ 1
1.1 Unpacking Checklist ............................................................ 1
Included Items ................................................................ 2
Optional Items ................................................................. 3
1.2 Description........................................................................... 4
1.3 Features............................................................................... 4
Hardware Monitoring ...................................................... 5
I/O Shield Connector ...................................................... 5
NuPRO-841Overview ..................................................... 5
System Block Diagram ................................................... 6
1.4 Specifications....................................................................... 7
2 Installation .......................................................................... 9
2.1 CPU Installation ................................................................... 9
Heat Sink & Retention Module Installation ................... 10
Memory Module Installation .......................................... 10
Setting Jumpers ............................................................ 12
2.2 Board Layout ..................................................................... 13
2.3 Jumper Settings................................................................. 14
2.4 Connector Description ....................................................... 16
2.5 Optional IP-ALCS20 Audio Card ....................................... 33
3 AwardBIOS Setup............................................................. 35
3.1 BIOS Instructions............................................................... 35
3.2 Main Menu ......................................................................... 35
...................................................................................... 35
Setup Items .................................................................. 36
Standard CMOS Features ............................................ 36
Advanced BIOS Features ............................................. 36
Advanced Chipset Features ......................................... 36
Integrated Peripherals .................................................. 36
Power Management Setup ........................................... 36

ii Table of Contents
PnP / PCI Configuration ................................................ 36
PC Health Status .......................................................... 36
Frequency / Voltage Control ......................................... 36
Load Fail-Safe Defaults ................................................ 37
Load Optimized Defaults .............................................. 37
Supervisor / User Password ......................................... 37
Save & Exit Setup ......................................................... 37
Exit Without Save ......................................................... 37
3.3 Standard CMOS Features ................................................. 38
Date .............................................................................. 38
Time .............................................................................. 38
IDE Primary Master ...................................................... 38
IDE Primary Slave ........................................................ 39
IDE Secondary Master .................................................. 39
IDE Secondary Slave .................................................... 39
Drive A/Drive B ............................................................. 39
Video ............................................................................. 39
Halt On .......................................................................... 39
Base Memory ................................................................ 39
Extended Memory ......................................................... 39
Total Memory ................................................................ 40
3.4 IDE Adapters...................................................................... 40
IDE HDD Auto-detection ............................................... 40
IDE Primary Master ...................................................... 40
Access Mode ................................................................ 41
Capacity ........................................................................ 41
Cylinder ......................................................................... 41
Head ............................................................................. 41
Precomp ....................................................................... 41
Landing zone ................................................................ 41
Sector ........................................................................... 41
3.5 Advanced BIOS Features .................................................. 42
Virus Warning ............................................................... 42
CPU L1& L2 Cache: ..................................................... 43
Quick Power On Self Test ............................................ 43
First/Second/Third Boot Device .................................... 43
Boot Other Device ........................................................ 43
Boot Up Floppy Seek .................................................... 43
Swap Floppy Drive ........................................................ 43
Boot Up NumLock Status ............................................. 44

Table of Contents iii
Gate A20 Option ........................................................... 44
Typematic Rate Setting ................................................ 44
Typematic Rate (Chars/Sec) ........................................ 44
Typematic Delay (Msec) ............................................... 44
Security Option ............................................................. 44
APIC Mode ................................................................... 45
MPS Version Control For OS ........................................ 45
OS Select For DRAM > 64MB ...................................... 45
Report No FDD For WIN95 ........................................... 45
3.6 Advanced Chipset Features .............................................. 46
DRAM Timing Selectable .............................................. 46
CAS Latency Time ........................................................ 47
Active To Precharge Delay ........................................... 47
DRAM RAS# to CAS# Delay: ....................................... 47
DRAM RAS# Precharge: .............................................. 47
Memory Frequency For ................................................ 47
System BIOS Cacheable .............................................. 47
Video BIOS Cacheable ................................................. 48
Memory Hole At 15M-16M ............................................ 48
Delayed Transaction ..................................................... 48
Delay Prior to Thermal: ................................................. 48
AGP Aperture Size (MB) ............................................... 48
On-Chip VGA ................................................................ 48
On-Chip Frame Buffer Size .......................................... 49
3.7 Integrated Peripherals ....................................................... 49
OnChip Primary/Secondary PCI IDE ............................ 50
IDE Primary/Secondary Master/Slave PIO ................... 50
IDE Primary/Secondary Master/Slave UDMA ............... 50
USB Controller .............................................................. 50
USB 2.0 Controller ........................................................ 50
USB Keyboard Support ................................................ 50
USB Mouse Support ..................................................... 50
AC97 Audio .................................................................. 51
Init Display First ............................................................ 51
IDE HDD Block Mode ................................................... 51
Onboard Lan Boot ROM ............................................... 51
Onboard FDC Controller ............................................... 51
Onboard Serial Port 1/Port 2 ........................................ 51
UART Mode Select ....................................................... 51
RxD, TxD Active ........................................................... 52

iv Table of Contents
IR Transmission Delay .................................................. 52
UR2 Duplex Mode ........................................................ 52
Use IR Pins ................................................................... 52
Onboard Parallel Port ................................................... 52
Parallel Port Mode ........................................................ 52
EPP Mode Select .......................................................... 52
ECP Mode Use DMA .................................................... 52
PWRON After PWR-Fail ............................................... 53
3.8 Power Management Setup ................................................ 53
ACPI Function ............................................................... 53
Power Management ...................................................... 54
Video Off Method .......................................................... 54
Video Off Method .......................................................... 54
Video Off In Suspend .................................................... 55
Suspend Type ............................................................... 55
MODEM Use IRQ ......................................................... 55
Suspend Mode .............................................................. 55
HDD Power Down ......................................................... 55
Soft-Off by PWR-BTTN ................................................. 55
CPU THRM-Throttling ................................................... 55
Wake-Up by PCI card ................................................... 55
Power On by Ring ......................................................... 56
Resume by Alarm ......................................................... 56
Reload Global Timer Events ......................................... 56
3.9 PnP/PCI Configurations ..................................................... 57
Reset Configuration Data ............................................. 57
Resources Controlled By .............................................. 57
IRQ Resources ............................................................. 58
IRQs .............................................................................. 58
PCI/VGA Palette Snoop ................................................ 58
3.10 PC Health Status ............................................................... 59
CPU Warning Temperature .......................................... 59
Current System Temp. .................................................. 59
Current CPU1 Temperature .......................................... 59
Current CPU Fan Speed ............................................... 59
Current Chassis FAN Speed ........................................ 59
VDimm (V) .................................................................... 60
Vcore ............................................................................ 60
VCC3.3V/+5V/+12V/-12V/-5V/5VSB (V) ....................... 60
VBAT (V) ....................................................................... 60

Table of Contents v
Shutdown Temperature ................................................ 60
3.11 Frequency/Voltage Control ................................................ 61
CPU Clock Ratio ........................................................... 61
Auto Detect PCI CLK .................................................... 61
Spread Spectrum .......................................................... 61
3.12 Load Fail-Safe Defaults ..................................................... 62
3.13 Load Optimized Defaults ................................................... 62
3.14 Supervisor/User Password Setting .................................... 62
3.15 Exit Selecting ..................................................................... 63
Save & Exit Setup ......................................................... 63
Exit Without Saving ....................................................... 63
Warranty Policy..................................................................... 65

vii List of Tables
List of Tables
Table 2-1: Jumper Settings ...................................................... 14
Table 2-2: JP1: COM Port Setting ........................................... 14
Table 2-3: JP2: Clear CMOS ................................................... 15
Table 2-4: JP3: Watchdog Timer ............................................. 15
Table 2-5: Connector Locations ............................................... 17
Table 2-6: CN1: System Panel Indicator Connector ................ 18
Table 2-7: CN2: Primary IDE Connector .................................. 19
Table 2-8: CN3: Floppy Disk Connector .................................. 20
Table 2-9: CN4: ATX 12V Power Connector ........................... 21
Table 2-10: CN5: Secondary IDE Connector ............................. 22
Table 2-11: CN6: Parallel Port Connector ................................. 23
Table 2-12: CN7: ATX Control Power Connector ...................... 24
Table 2-13: CN8: COM2 RS-232/422/485 Serial Port ............... 24
Table 2-14: CN9: System (Chassis) Power Connector .............. 26
Table 2-15: CN10: FAN1 CPU Power Connecto ....................... 26
Table 2-16: CN11: COM1 RS-232 Serial Port Connector .......... 27
Table 2-17: CN12: IrDA Pin Header .......................................... 28
Table 2-18: CN13: LAN (82562ET) RJ-45 Connector ............... 28
Table 2-19: CN14: Audio Extension Pin Header ........................ 29
Table 2-20: CN15: USB0/1 Port Pin Header .............................. 30
Table 2-21: CN16: USB2/3 Port Pin Header .............................. 30
Table 2-22: CN17: CRT VGA Port Connector ........................... 31
Table 2-23: CN18: External Keyboard Connector ..................... 32
Table 2-24: CN19: PS/2 Keyboard/Mouse Connector ............... 32
Table 2-25: IP-ALCS20 Jumpers and Connectors ..................... 33
Table 2-26: JP1: CD_IN Connector ........................................... 34
Table 2-27: CN1: Audio Line_out, Line_in, MIC Jack ................ 34
Table 2-28: CN2: Audio Signal Connector ................................. 34

List of Figures ix
List of Figures
Figure 1-1: I/O Bracket Layout..................................................... 5
Figure 1-2: System Block Diagram .............................................. 6
Figure 2-1: CPU Socket ............................................................... 9
Figure 2-2: Heat Sink & Retention Module Installation .............. 10
Figure 2-3: DIMM Memory and 184-pins Socket ....................... 11
Figure 2-4: Memory Installation ................................................. 11
Figure 2-5: Jumper Connector ................................................... 12
Figure 2-6: Jumper & Connector Locations ............................... 13
Figure 2-7: Connector Location ................................................. 16
Figure 2-8: COM Port Connection ............................................. 25
Figure 2-9: IP-ALCS20 Audio Card............................................ 33
Figure 3-1: Award BIOS Main Screen........................................ 35
Figure 3-2: Standard CMOS Features ....................................... 38
Figure 3-3: IDE Confuration Screen........................................... 40
Figure 3-4: Advanced BIOS Features........................................ 42
Figure 3-5: Advanced Chipset Screen ....................................... 46
Figure 3-6: Integrated Peripherals Screen................................. 49
Figure 3-7: Power Management Setup ...................................... 53
Figure 3-8: PnP/PCI Configurations........................................... 57
Figure 3-9: IRQ Resources ........................................................ 58
Figure 3-10: PC Health Status ..................................................... 59
Figure 3-11: Frequency/Voltage Control...................................... 61

Introduction 1
1 Introduction
1.1 Unpacking Checklist
Check the shipping carton for any damage. If the shipping carton
and contents are damaged, notify the dealer for a replacement.
Retain the shipping carton and packing materials for inspection by
the dealer. Obtain authorization before returning any product to
ADLINK.
Check the following items are included in the package, if there are
any items missing, please contact your dealer:

2Introduction
Included Items
Single Board Computer
Installation Guide
Floppy ribbon cable ATA-66/100 HDD ribbon cable
COM2 ribbon cable Print ribbon cable
K/B & M/S Y type cable
Driver CD
K/B-M/S extend to BP cable
(5-pin to 6-pin) ATX power control cable
(4-pin to 4-pin)

Introduction 3
Optional Items
USB 2.0 cable (1 Set)
IP-ALCS20 Audio card
Audio 9-pins round cable
Note: The packaging of the NuPRO-841 OEM version with
non-standard configuration, functionality, or package
may vary according to different configuration requests.
CAUTION: The NuPRO-841 single board computer must be pro-
tected from static discharge and physical shock. Never
remove any of the socketed parts except at a
static-free workstation. Use the anti-static bag shipped
with the product to handle the board. Wear a grounded
wrist strap when servicing

4Introduction
1.2 Description
The NuPRO-841 single board computer is optimized for socket
478 FC-PGA Intel Pentium 4 (Northwood) processors up to
3.06GHz and Intel Pentium 4 (Prescott) processors up to 2.8 GHz,
supporting 533 / 400MHz Front Side Bus. The memory can
accommodate up to 2GB DDR 266 / 333 SDRAM. This board is
based on the Intel 845GV chipset and is fully designed for harsh
industrial environment. The NuPRO-841 includes an on-die VGA
and one 10/100 Mbps Ethernet controller and is ideal for CTI and
high-performance applications.
Other I/O functions include two serial ports, one parallel port, two
ATA100 IDE interfaces, one FDC interface, four USB 2.0 ports, a
Watch Dog Timer, and PS/2 keyboard & mouse.
Key components of the NuPRO-841 are selected for long-term
availability, such as Intel’s chipset. Availability is guaranteed. Even
longer life is possible depending on market situation. Product life
cycle can also be extended for OEM contracts.
1.3 Features
XSupport Intel Pentium 4 / Celeron (Northwood and Prescott)
processors
XIntel® 845GV AGPset
XSupport 2GB DDR266/333 SDRAM (Max.) Memory
XFront Side Bus Frequency: 400 / 533MHz
XChipset integrated graphic controller
XSingle 10/100 Mbps Ethernet interface using Intel 82562ET
chip
XSoftware programmable watchdog timer
XHardware Monitoring
XSupport ISA high-drive
XAC97 Audio pin-header (for optional audio card)

Introduction 5
Hardware Monitoring
Hardware monitoring allows you to monitor various aspects of
your systems operations and status, including CPU temperature,
voltage, and fan RPM.
I/O Shield Connector
The SBC is equipped with an I/O bracket. Please use the appropri-
ate I/O shield (Figure 1.1).
Figure 1-1: I/O Bracket Layout
NuPRO-841Overview
XChipset: 845GV
XVGA: (845GV)
XEthernet: 10/100
XAC97 Audio Pin-header (for optional audio card)
XTwo EIDE interfaces
XOne floppy interface
XOne parallel interface
XTwo serial ports
XFour USB 2.0 ports

6Introduction
System Block Diagram
Figure 1-2: System Block Diagram
P4 Socket 478-pins
Support Prescott Code
Processor
ClockVRM
DATACTRLADDR
GMCH (845GV)
760 FC-BGA
ICH4
421 BGA
DDR266/333 X2 CRT
10/100 T-Base
82562ET
Super I/O
W83627HF
ATA100
USB
IDE Primary
IDE Secondary
USB Port 1/2
USB Port 3/4
FWH
Keyboard
Mouse
COM Port
LPT Port
Floppy
iTE Bridge
IT8888F
ISA BUS
PCI BUS
PICMG SLOT

Introduction 7
1.4 Specifications
XProcessor:
ZSocket 478-pins, for Intel Pentium 4/ Celeron processors
(Northwood / Prescott)
XChipset:
ZIntel® 845GV + ICH4 AGPset
XFront Side Bus:
Z400 / 533 MHz
XDRAM Module:
Z184-pins DIMM x 2 for DDR SDRAM up to 2GB (max.)
ZSupports 266/333 DDR SDRAM
XVGA:
ZIntel® 845GV chipset integrated graphic controller
XEthernet:
ZIntel® 82562ET Ethernet controller
Z10/100Base-TX Ethernet
XAudio Function: (Optional)
ZAC97 audio interface, audio card optional
Z9-pins (pin-header) interface
XOnboard I/O:
ZOn-Chip I/O integrated with K/B, Mouse, FDD, Parallel
and Serial controllers
XOnboard PCI / IDE:
ZIntel® ICH4 south bridge controller
ZPCI rev2.2 compliant
ZACPI Compliant Power Management
ZPCI bus IDE port with PIO / ATA-100 x 2 (up to 4
devices)
XBracket I/O Connectors:
ZD-Sub serial port (COM1)
ZSingle RJ-45 connector
Z15-pins D-Sub VGA connector

8Introduction
ZPS/2 mouse or PS/2 style keyboard
XUSB 2.0 Ports:
Z4 x USB 2.0 ports (pin-header)
XBIOS:
ZAward Plug and Play BIOS
XExtended Function:
ZHardware Monitoring
ZIrDA by pin-header
ZSupport ISA high-drive
XForm Factor:
Z13.3” x 4.8” (338 x 122mm)
XWeight:
Z0.93lb (420g)