ADT BHS-3000C User manual

BHS-3000C Quick Guide
https://alpha.adt.com/help/22.html[11/8/2018 11:28:36 PM]
BHS-3000C Quick Guide
For a detailed review of the entire system, please view the BHS 3000C manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm in STAY mode with motion detectors off, press [ON] + [MOTION OFF}
To arm in AWAY mode with motion detectors off, press [ON] + [MOTION OFF] + [INSTANT].
To arm in INSTANT mode, with motion detectors on, press [ON] + [INSTANT].
Disarm:
To disarm, enter your [security code].
For more information on this topic please please view the BHS 3000C manual.
Select

BHS-3000C Quick Guide
https://alpha.adt.com/help/22.html[11/8/2018 11:28:36 PM]
Battery
The BHS 3000C operates on a UB 1270 battery.
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
For more information on this topic please please view the BHS 3000C manual.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press [*] to enter the function menu.
Press [1] OR [*], then your [security code].
Enter the two digit number of the zone to be bypassed OR use the [<>] keys to find the zone.
Press [*] to select a zone.
A [B] will appear once a zone has been bypassed.
To exit bypassing mode and return to Ready state, press [#].
To unbypass a zone, enter the two digit zone number OR use [<>] to find the zone, then press [*].
The [B] will disappear from the display.
For more information on this topic please visit the complete BHS 3000C manual.
Change Date and Time
The display window of the Premium keypad may show the time of day. You do not have to set the clock.
It will adjust itself automatically every few months.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode on and off using the Standard keypad, press [OPTIONS] + [2] + [security code].
To turn chime mode on and off using the Premium keypad, press and hold the [OPTIONS] until the
display reads [DOOR CHIME, ENTER CODE], then enter your [security code].
For more information on this topic please please view the BHS 3000C manual.
Reset

BHS-3000C Quick Guide
https://alpha.adt.com/help/22.html[11/8/2018 11:28:36 PM]
Return to Top
To reset the system after an alarm event, first enter your [security code].
Then, to view the event, press the [Options] button until the display shows [Alarm Memory, Enter
Code] + your [security code].
Security Codes
You can program up to 91 additional security codes for use by other users, however only the Master user
can assign user codes to users.
To add a user code using the Standard keypad, press [OPTIONS] + [3] +[security code] + [new user
number] + [new user code]. They keypad will beep in confirmation.
To add a user code using the Premium keypad, press and hold the [OPTIONS] button until the
display reads [AUXILIARY CODES, ENTER MASTER CODE], then enter your [security code] + [new
user number] + [new user code]. They keypad will beep in confirmation.
To delete a user code using the Standard keypad, press [OPTIONS] + [3] + [user number] +
[CANCEL]. They keypad will beep in confirmation.
To delete a user code using the Premium keypad, press and hold the [OPTIONS] button until the
display reads [AUXILIARY CODES, ENTER MASTER CODE], then enter your [security code] + [user
number] + [CANCEL]. They keypad will beep in confirmation.
The Master Code cannot be changed at the keypad. Please contact Customer Care for assistance.
For more information on this topic please please view the BHS 3000C manual.
Trouble Conditions
Your security system is able to automatically test itself for power failures, low batteries, nonworking
sensors, and communication troubles with the central monitoring station. In the event that your system
does have a trouble condition, refer to the tables below to identify the trouble code and resolve your
issue.
To silence trouble beeps, press [CANCEL] twice.
For a complete list of Trouble Conditions, please refer to the BHS 3000 and 4000 Troubleshooting page.
Volume
The volume on the BHS 3000C is not adjustable.

BHS-3000C Quick Guide
https://alpha.adt.com/help/22.html[11/8/2018 11:28:36 PM]
How can we help?
Search