Advantech PCE-5B06-00A1E Installation and operation manual

PCE-5B06-00A1E Startup Manual 1
PCE-5B06-00A1E Backplane: 6-slot BP for 6 slot Chassis, 1 PICMIG 1.3, 4 PCIe
PCE-5B06-00A1E Backplane: 6-slot BP for 6 slot
Chassis, 1 PICMIG 1.3, 4 PCIe
Startup Manual
Before you begin installing your card, please make sure
that the following materials have been shipped:
If any PCE-5B06-00A1E of these items are missing or
damaged, contact your distributor or sales representative
immediately.
Standard Functions
• PICMIG 1.3 slots:
PCE-5B06-00 supports PCE-5xxx CPU boards
• PCIe slots:
PCE-5B06-00 supports one PCIe x 16 slot, four PCIe x 1
slot
• USB (2.0) support: Four USB 2.0 port pin headers
Mechanical and Environment
• Dimensions: 317.5 x 142.17 mm
• Power supply voltage: +12 V, +5 V, -12 V, -5 V, +3.3 V
+5VSBY, +3.3VSBY
• Power requirements: Refer to the CPU Board, add-on
Card & Peripherals
• Operating temperature: 0 ~ 60° C
• Weight: 0.3 kg (weight of board)
Packing list Specifications
• 2 Two Port USB Cable p/n: 1700002204
• PCE-5B06-00A1E User Manual
1st.ED
p/n: 200K5B0610
• M4*6*0.7 Round Screws (15 pcs) p/n: 1939000410
• 2 years quality warranty card p/n: 2190000902
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the PCE-5B06-00A1E series Rev. A1
Part No. 200K5B0610
Printed in China 1st Edition Feb. 2007

2 PCE-5B06-00A1E Startup Manual
The backplane has a number of connectors and jumpers that
allow you to configure your system to suit your application. The
table below lists the function of each of the jumpers and con-
nectors:
Connectors and Jumpers
Connectors
Label Function
SHBA1~SHBD1 PICMG1.3 CPU board slot
PPCIE3 PCIe x 16 slot
PPCIE1,PPCIE2,
PPCIE4,PPCIE5
PCIe x 1 slot
EATXPWR1 ATX2.0 24-pin Power Connector
ATX12V1 ATX 12V 4-pin Power Connector
EATX12V1 ATX 12V Auxiliary 8-pin Power Connector
PWR3V1 3.3V Auxiliary 8-pin power connector
VOLT1 Alarm board / CMM Power Connector
FAN1 FAN Connector
FAN2 FAN Connector
FAN3 FAN Connector
FAN4 FAN Connector
FANDEC1 FAN speed detector Connector
SMBUS1 SMBus Connector for chassis monitor
SMBUS2 SMBus Connector for chassis monitor
KBMS1 External Keyboard/Mouse Connector
KBMS2 External Keyboard/Mouse Connector
JFP1 Power and Reset button Connector
IPMB1 IPMB Connector
USB12 Two USB port pin header
USB34 Two USB port pin header
Jumpers
Label Function
PSON1 ATX / AT Mode Selection
EATXPWER1
Pin Name
1 3.3 V
2 3.3 V
3GND
45V
5GND
65V
7GND
8 Power OK
9 5 V SBY
10 12 V
11 12 V
12 3.3 V
13 3.3 V
14 -12 V
15 GND
16 PSON#
17 GND
18 GND
19 GND
20 -5 V
21 -5 V
22 5 V
23 5 V
24 GND
ATX12V1
Pin Name
1GND
2GND
3 12 V
4 12 V
EATX12V1
Pin Name
1GND
2GND
3GND
4GND
5 12 V
6 12 V
7 12 V
8 12 V
PWR3V1
Pin Name
13.3V
23.3V
33.3V
4GND
5GND
6GND
VOLT1
Pin Name
1 5VSBY
2GND
3GND
4-5V
55V
63.3V
7 -12V
8 12V
FAN1 - FAN4
Pin Name
1GND
2 12V
3FANIO1~FANIO4
FANDEC1
Pin Name
1FANIO1
2FANIO2
3FANIO3
4FANIO4
5N/A
6N/A
7N/A
SMBUS1 ~ SMBUS2
Pin Name
15V
2 C-SMBBUS
3C-SMBDAT
4GND

PCE-5B06-00A1E Startup Manual 3
KBMS1 ~ KBMS2
Pin Name
1 KBCLK
2 KBDAT
3MSDAT
4GND
55V
6MS_CLK
IPMB1
Pin Name
1 IPMB_CLK
2 IPMB_DAT
3GND
USB12
Pin Name
1 USBV0
2 USBV0
3USBD0-
4USBD1-
5USBD0+
6USBD1+
7GND
8GND
9Null
10 GND
USB34
Pin Name
1 USBV2
2 USBV2
3 USBD2-
4 USBD3-
5 USBD2+
6 USBD3+
7GND
8GND
9Null
10 GND
JFP1
Pin Name
1PWRBTN
2PWRBTN
3 RESET
4 RESET
PSON1: ATX/AT Mode Selection
Jumper Setting Function
1-2 AT mode
2-3* ATX mode
*: Default
123 123

4 PCE-5B06-00A1E Startup Manual
Locating Connectors and Jumpers Mechanical Drawing
Locating connectors and Jumpers Board Dimensions

PCE-5B06-00A1E Startup Manual 5
Board Diagram
Board Diagram

PCE-5B06-03A1E Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCE-5B06-03A1E Startup manual
2. M4*6*0.7 Round Screws (5 pcs) p/n: 1939000410
3. 2 years quality warranty card p/n: 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Standard PC Functions
• PICMIG 1.3 slots: PCE-5B06-03 supports PCE-
5XXX/7XXX CPU boards
• PCIe slots: PCE-5B06-03 supports one PCIe x 16 slot
and one PCIe x4
• 32-bit PCI: Three 32 Bit / 33 MHz PCI slot
• USB (2.0) support: Four Universal Serial Bus ports to
Backplane
Mechanical and Environment
• Dimensions: 80.01 x 325 mm
• Power supply voltage: +12 V, +5 V, -12 V, -5 V, +5 V SBY,
+3.3 V
• Power requirements: Refer to the CPU Board, add-on
Card & Peripherals
• Operating temperature: 0 ~ 60° C
• Weight: 0.211 kg (weight of board)
PCE-5B06-03A1E Backplane: 6-slot BP for 6 slot Chassis, 1 PIC-
MIG 1.3, 1 x PCIex16, 1 x PCIex4, 3 x 32-bit PCI
Startup Manual
The board has a number of jumpers that allow you to con-
figure your system to suit your application.
The table below lists the function of each of the jumpers and
connectors.
Jumpers and connectors
Jumpers
Label Function
PSON1
ATX / AT Mode Selection
Connectors
Label Function
SHBA1~SHBD1 PICMG1.3 CPU board slot
PPCIEX4_1 PCIE X4 slot
PPCIEX16_1 PCIe x 16 slot
PPCI1~PPCI3 32 Bit / 33 MHz PCI Bus slot
EATXPWR1 ATX2.0 24-pin Power Connector
EATX12V1 ATX 12 V Auxiliary 8-pin Power
Connector
ATX12V1 ATX 12 V 4-pin Power Connector
VOLT1 Alarm board / CMM Power Connector
PWR3V1 ATX 3V 6-pin Power Connector
FAN1 FAN Connector
FAN2 FAN Connector
FAN3 FAN Connector
FAN4 FAN Connector
FAN5 FAN connector
FANDEC1 FAN speed detector Connector
SMBUS1 SMBus Connector for chassis
monitor
SMBUS2 SMBus Connector for chassis
monitor
JFP1 Power and Reset button Connector
IPMB1 IPMB Connector
USB12 Two USB port pin headers
USB34 Two USB port pin headers
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for PCE-5B06-03A1E series Rev. A1.
Part No. 20065B0600
Print in China
1st Edition
Mar. 2013
Jumpers and Connectors

2 PCE-5B06-03A1E Startup Manual
Connector Pin Definitions
EATXPWER1
Pin Name
13.3 V
23.3 V
3 GND
45 V
5 GND
65 V
7 GND
8 Power OK
9 5 V SBY
10 12 V
11 12 V
12 3.3 V
13 3.3 V
14 -12 V
15 GND
16 PSON#
17 GND
18 GND
19 GND
20 -5 V
21 -5 V
22 5 V
23 5 V
24 GND
ATX12V1
Pin Name
1 GND
2 GND
312 V
412 V
EATX12V1
Pin Name
1 GND
2 GND
3 GND
4 GND
512 V
612 V
712 V
812 V
PWR3V1
Pin Name
1 3.3 V
2 3.3 V
3 3.3 V
4 GND
5 GND
6 GND
VOLT1
Pin Name
1 5 V SBY
2 GND
3 GND
4 -5 V
5 5 V
6 3.3 V
7 -12 V
8 12 V
FAN1 ~ FAN5
Pin Name
1 GND
2 12 V
3 FANIO1 ~ FANIO5
Jumpers and Connectors

PCE-5B06-03A1E Startup Manual 3
5 USBD2+
6 USBD3+
7 GND
8 GND
9 Null
10 GND
JFP1
Pin Name
1 PWRBTN
2 GND
3 RESET
4 GND
Jumper Setting
PSON1: ATX / AT Mode Selection
Jumper Setting Function
1-2 closed pins
AT Mode
2-3 closed pins
ATX Mode (Default)
PCI 32-bit
PCI Interrupt
Pin Route
PCI
Slot PPCI1 PPCI2 PPCI3 PPCI4
IDSEL AD 31 AD 30 AD 29 AD 28
INT A INT B INT C INT D INT A
INT B INT C INT D INT A INT B
INT C INT D INT A INT B INT C
INT D INT A INT B INT C INT D
123
12 3
FANDEC1
Pin Name
1 FANIO1
2 FANIO2
3 FANIO3
4 FANIO4
SMBUS1~SMBUS2
Pin Name
1 5 V
2 C-SMBBUS
3 C-SMBDAT
4 GND
IPMB1
Pin Name
1 IPMB_CLK
2 IPMB_DAT
3 GND
USB12
Pin Name
1 USBV0
2 USBV0
3 USBD0-
4 USBD1-
5 USBD0+
6 USBD1+
7 GND
8 GND
9 Null
10 GND
USB34
Pin Name
1 USBV2
2 USBV2
3 USBD2-
4 USBD3-
Jumpers and Connectors
PCI Routing Tables

4 PCE-5B06-03A1E Startup Manual
Figure 1: Board Layout
Board Layout
FANDEC1
USB34 USB12
ATX12V1
SMBUS2
SMBUS1
JFP1
PSON1
EATX12V1
EAXPWR1
VOLT1
FAN1 FAN2
FAN3
FAN4
IPMB1
PWR3V1
FAN5
KEY
KEY
KEY
KEY
PSON1
FAN3
IPMB1
FAN4
VOLT1
FAN2FAN1
SHBA1
SHBB1
SHBC1
SHBD1
FAN5
SMBUS1
PWR3V1
EATX12V1
ATX12V1
EAXPWR1
USB12
USB34
SMBUS2
JFP1
PPCIEX4_1
PPCIEX16_1
PPCI1 PPCI2 PPCI3
FANDEC1

PCE-5B06-03A1E Startup Manual 5
Figure 2: Board Diagram
Board Diagram
PCI BUS
PICMG 1.3 CONNECTOR "D"
32-bit/33MHz P1PCI
USBX4, IPMI, POWER
PICMG 1.3 CONNECTOR "C"
SMBUS X2
LAN X2
SATA X2
USB X4
PICMG 1.3 CONNECTOR "B"
PCI-EXPRESS X8
PICMG 1.3 CONNECTOR "A"
PCI-EXPRESS X8, AND X4
PPCIeX16_1
PCI-E x16
PCI-E x4
SHB PPCIeX4_1 PPCI1 PPCI2 PPCI3
PCI 32-bit/33MHz P2PCI4 PCI 32-bit/33MHz P2PCI4 PCI 32-bit/33MHz P2PCI4
PICMG_v1.3 BACKPLANE

6 PCE-5B06-03A1E Startup Manual
Figure3: Board Dimensions (mm)
Board Dimensions
4.00(x13)
10.00(x13)
R2.00
3.00
266.00
101.57
16.12
16.51
111.01
3.00(x5)
327.66
314.96
292.46
260.35
250.66
180.16
170.81
165.16
10.16
107.16
268.84
177.15
111.11
41.28
45.45
142.17
125.64
105.32
123.01
19.42
85.00
62.12
41.80
7.21
117.72
15.01
R5.00
KEY
KEY

PCE-5B06-04A1E Startup Manual 1
PCE-5B06-04A1E Backplane: 6-slot BP for 6 slot
Chassis, 1 PICMIG 1.3, 1 PCIe, 4 32-bit PCI
Before you begin installing your card, please make
sure that the following materials have been shipped:
If any PCE-5B06-04A1E of these items are missing or
damaged, contact your distributor or sales represen-
tative immediately.
Standard Functions
• PICMIG 1.3 slots:
PCE-5B06 supports PCE-5xxx CPU boards
•
PCIe slots:
PCE-
5B06 Supports one PCIe x16 slot
• 32-bit PCI:
Four 32 Bit / 33Mhz PCI slot
• USB (2.0) support: Four USB 2.0 port pin headers
Mechanical and Environment:
• Dimensions: 327.66 x 142.17 mm
• Power supply voltage: +12V, +5V, -12V, -5V, +3.3V,
+5VSBY
• Power requirements: Refer to the CPU Board , add-on
Card & Peripherals
• Operating temperature:
0 ~ 60°C
• Weight: 0.3kg (weight of board)
The backplane has a number of connectors and jumpers
that allow you to configure your system to suit your appli-
cation. The table below lists the function of each of the
connectors and jumpers.
Connectors
Jumpers
• 2 Two Port USB Cable p/n: 1700002204
• PCE-5B06-04A1E User Man-
ual 1st. ED
p/n: 200K5B0600
• M4*6*0.7 Round Screws
[15 pcs.]
p/n: 1939000410
• 2 years quality warranty card p/n: 2190000902
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the PCE-5B06-04A1E series
Rev. A1.
Part No. 200K5B0600
Printed in China
1st. Edition
Jul 2006
1. Connectors and Jumpers
Part
Reference Function
SHBA1~SHBD1 PICMG 1.3 CPU board slot
PPCIE1 PCIe x16 slot
PPCI1~PPCI4
32 Bit / 33MHz PCI Bus Slot (Primary 3)
EATXPWR1 ATX2.0 24-Pin Power connector
ATX12V1 ATX 12V 4-pin power connector
EATX12V1 ATX 12V Auxiliary 8-pin power connector
PWR3V1
3.3V Auxiliary power connector
VOLT1 Alarm board/CMM Power connector .
FAN1 FAN Connector
FAN2 FAN Connector
FAN3 FAN Connector
FAN4 FAN Connector
FANDEC1 Fan speed detector connector
SMBUS1 SMBus connector for chassis monitor
SMBUS2 SMBus connector for chassis monitor
KBMS1 External Keyboard/Mouse Connector
KBMS2 External Keyboard/Mouse Connector
JFP1 Power and Reset Button connector
IPMB1 IPMB Connector
USB12 Two USB port pin header
USB34 Two USB port pin header
Part
Reference Function
PSON1 ATX/AT mode selection
PCE-5B06-04A1E Backplane: 6-slot BP for 6 slot Chassis, 1 PICMIG 1.3, 1 PCIe, 4 32-bit PCI

2 PCE-5B06-04A1E Startup Manual
Board Layout: Jumper and Connector Locations
2. Board Layout
VOLT1
KBMS1
FAN3
PSON1
FAN4
IPMB1
USB34
USB12
EATX12V1
PWR3V1
ATX12V1
FAN2
EATXPWR1
FAN1
H3
H2
H13
H12
H8
H10
H9
H11
H5
H4
H6
H7
H1
J3
J2
J1
KBMS2
PPCI3
PPCI1 PPCI2 PPCI4
SHBC1
SHBA1
PPCIE1
SATA2
SATA1
SHBB1
SHBD1
SMBUS1
SMBUS2
PWR_LED
SPK
SMBUS
HDD_LED
RESETPWRBTN
19CK5B0601
PCIXCAP
PSON1:ATX/AT Mode Select
Jumper Setting
(2-3)SHORT (1-2)SHORT
GF_PS_ON#
PSP_PS_ON#
GND
+12V-12V
3.3V5V-5VGNDGND
+5VSB
GND+12V
GND
+3.3V
GND+12V
REV.A1
01-2
PCE-5B06
JUMPER J3
MODE
FPIO
LAN
(1-2)PULLUP
(2-3)GND
M66EN(J2)
66
33
PCI(MHZ)
(1-2)SHORT
(2-3)SHORT
AT ATX
MODE
PINROUTE
INTERRUPT
PCI
INTD
INTBINTC
INTD
INTD
INTD INTC
INTC INTC
INTB
INTB
INTB INTA
INTA
INTA
INTA
INTD INTC INTBINTA
AD28AD29
AD30
AD31
IDSEL
PPCI4
PPCI3
PPCI2
PPCI1PCISLOT

PCE-5B06-04A1E Startup Manual 3
3. Connector Pin Definitions
EATXPWER1
Pin Name
13.3V
23.3V
3GND
45V
5GND
65V
7GND
8 Power OK
95VSBY
10 12V
11 12V
12 3.3V
13 3.3V
14 -12V
15 GND
16 PSON#
17 GND
18 GND
19 GND
20 -5V
21 -5V
22 5V
23 5V
24 GND
ATX12V1
Pin Name
1GND
2GND
312V
4 12V
EATX12V1
Pin Name
1GND
2GND
3GND
4GND
512V
6 12V
712V
8 12V
PWR3V1
Pin Name
13.3V
23.3V
33.3V
4GND
5GND
6GND
VOLT1
Pin Name
15VSBY
2GND
3GND
4-5V
55V
63.3V
7-12V
8 12V
FAN1 - FAN4
Pin Name
1GND
2 12V
3FANIO1~FANIO4
FANDEC1
Pin Name
1FANIO1
2FANIO2
3FANIO3
4FANIO4
5N/A
6N/A
7N/A

4 PCE-5B06-04A1E Startup Manual
3. Connector Pin Definitions (cont.)
SMBUS1 ~ SMBUS2
Pin Name
15V
2C-SMBBUS
3C-SMBDAT
4GND
KBMS1 ~ KBMS2
Pin Name
1KBCLK
2 KBDAT
3MSDAT
4GND
55V
6MS_CLK
IPMB1
Pin Name
1IPMB_CLK
2 IPMB_DAT
3GND
USB12
Pin Name
1USBV0
2 USBV0
3USBD0-
4 USBD1-
5USBD0+
6 USBD1+
7GND
8GND
9Null
10 GND
USB34
Pin Name
1USBV2
2 USBV2
3USBD2-
4 USBD3-
5USBD2+
6 USBD3+
7GND
8GND
9Null
10 GND
JFP1
Pin Name
1PWRBTN
2PWRBTN
3RESET
4 RESET

PCE-5B06-04A1E Startup Manual 5
4. PCI Routing Tables
PCI 32-bit
PCI Slot PPCI1 PPCI2 PPCI3 PPCI4
PCI
IDSEL AD 31 AD 30 AD 29 AD28
Interrupt
INTA INTD INT C INT B INT A
Pin
INTB INTA INT D INT C INT B
Route
INTC INTB INT A INT D INT C
INTD INTC INT B INT A INT D
5. Jumper Settings
PSON1: ATX/AT Mode Selection
Jumper Setting Function
1 - 2 closed pins AT mode
2 - 3 closed pins ATX mode (default)
123
123

PCE-5B06-04A1E Startup Manual 6
Board Diagram
6. Board Diagram

7 PCE-5B06-04A1E Startup Manual
Board Dimensions (mm)
7. Board Dimensions
VOLT1
KBMS3
KBMS1
FAN3
PSON1 FAN4
IPMB1
USB34
USB12
EATX12V1
PWR3V1
PWR1
ATX12V1
FAN2
EATXPWR1
FAN1
FAND EC1
H3
H2
H13
H12
H8
H10
H9
H11
H5
H4
H6
H7
H1
J3
J2
J1
KBMS2
LAN1
LAN2
LANLED1
PPCI3
PPCI1 PPCI2 PPCI4
SHBC1
SHBA1
PPCIE1
SATA2
SATA1
SHBB1
SHBD1
SMBUS1
SMBUS2
PWR_LED
SPK
SMBUS
HDD_LED
RESETPWRBTN
19CK5B0601
PCIXCAP
PSON1:ATX/ATMode Select
JumperSetting
(2-3)SHORT (1-2)SHORT
GF_PS_ON#
PSP_PS_ON#
GND
+12V-12V
3.3V5V-5VGNDGND
+5VSB
GND+12V
GND
+12V
GND
GND
+5V
+3.3V
GND+12V
REV.A1
01-2
PCE-5B06
JUMPERJ3
MODE
FPIO
LAN
(1-2)PULLUP
(2-3)GND
M66EN(J2)
66
33
PCI(MHZ)
(1-2)SHORT
(2-3)SHORT
AT ATX
MODE
PINROUTE
INTERRUPT
PCI
INTD
INTBINTC
INTD
INTD
INTD INTC
INTC INTC
INTB
INTB
INTB INTA
INTA
INTA
INTA
INTD INTC INTBINTA
AD28AD29
AD30
AD31
IDSEL
PPCI4
PPCI3
PPCI2
PPCI1PCISLOT
16.12
25.93
36.93
55.54 66.54
92.24
101.57
12.70
35.20
58.93
67.31
77.00
150.01
156.85
162.50
216.66
308.35
327.66
8.18
18.46
38.44
56.32
68.48
91.13
107.88
162.42
177.04
198.27
227.47
253.02
264.72
280.65
305.54
317.50
5.66
19.16
24.45
40.66
60.98
81.30
100.37
125.66
97.67
39.62
9.35
20.74
13.55
20.32
26.83
142.17

PCE-5B06-40A1E (PCE-7B06-40A1E) Startup Manual 1
PCE-5B06-40A1E (PCE-7B06-40A1E) Backplane:
6-slot BP for 6 slot Chassis, 1 PICMIG 1.3,
1 PCIe, 4 64-bit PCI-X
Before you begin installing your card, please make
sure that the following materials have been shipped:
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Standard Functions
• PICMIG 1.3 slots:
PCE-5B06 supports PCE-5xxx CPU boards
PCE-7B06 supports PCE-7xxx CPU boards
•
PCIe slots:
PCE-5B06 supports one PCIe x16 slot
PCE-7B06 supports 2 PCIe ×8 slots
• 64-bit PCI-X:
Four 64-bit/100MHz PCI-X slots
• USB (2.0) support: Four USB 2.0 port pin headers
Mechanical and Environment:
• Dimensions: 327.66 x 142.17 mm
• Power supply voltage: +12V, +5V, -12V, -5V, +3.3V,
+5Vsb
• Power requirements: Refer to the CPU Board , add-on
Card & Peripherals
• Operating temperature:
0 ~ 60°C
• Weight: 0.3kg (weight of board)
The backplane has a number of connectors and jumpers
that allow you to configure your system to suit your appli-
cation. The table below lists the function of each of the
connectors and jumpers.
Connectors
1. Packing List
• 2 Two Port USB Cable p/n: 1700002204
• PCE-5B06-40A1E (PCE-
7B06-40A1E) User Manual
1st. ED
p/n: 200K5B0640
• M4*6*0.7 Round Screws
[15 pcs.]
p/n: 1939000410
• 2 years quality warranty card p/n: 2190000902
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the PCE-5B06-40A1E
(PCE-7B06-40A1E) series, Rev. A1.
Part No. 200K5B0640
Printed in China
1st. Edition
Dec 2007
2. Connectors and Jumpers
Part Reference Function
SHBA1~SHBD1 PICMG 1.3 CPU board slot
PPCIE1 PCE-5B06-40A1E: PCIe x 16 slot
PCE-7B06-40A1E: PCIe x 8 slot
P1PCIX1~
P1PCIX2
64-bit / 100-MHz PCI-X Bus Slot (Primary 1)
P2PCIX1~
P2PCIX2
64-bit / 100-MHz PCI-X Bus Slot (Primary 2)
EATXPWR1 ATX2.0 24-Pin Power connector
ATX12V1 ATX 12V 4-pin power connector
EATX12V1 ATX 12V Auxiliary 8-pin power connector
PWR3V1 3.3V Auxiliary power connector
VOLT1 Alarm board/CMM Power connector .
FAN1 FAN Connector
FAN2 FAN Connector
FAN3 FAN Connector
FAN4 FAN Connector
FAN5 FAN Connector
FANDEC1 Fan speed detector connector
SMBUS1 SMBus connector for chassis monitor
SMBUS2 SMBus connector for chassis monitor
J11~J12 SMBus source select
JFP1 Power and Reset Button connector
IPMB1 IPMB Connector
USB12 Two USB port pin header
USB34 Two USB port pin header
PCE-5B06-40A1E (PCE-7B06-40A1E) Backplane: 6-slot BP for 6 slot Chassis, 1 PICMIG 1.3, 1 PCIe, 4 64-bit PCI-X

2 PCE-5B06-40A1E (PCE-7B06-40A1E) Startup Manual
Jumpers
E.g.: How to set both P1PCIX1 and P1PCIX2 to 64-bit,
100 MHz PCI-X mode:
J3: OPEN
J2: Both (1-2) and (2-3) are okay, but (1-2) setting is rec-
ommended.
E.g.: How to set both P2PCIX1 and P2PCIX2 to 64-bit,
100 MHz PCI-X mode:
J6: OPEN
J5: Both (1-2) and (2-3) are okay; (1-2) setting is recom-
mended.
E.g.: How to set both P1PCIX1 and P1PCIX2 to 32-bit, 66
MHz PCI mode:
J1: Both (1-2) and (2-3) are okay.
J3: (2-3)
J2: (1-2)
E.g.: How to set both P1PCIX1 and P1PCIX2 to 32-bit, 33
MHz PCI mode:
J6: (2-3)
J5: (2-3)
Label Function
PSON1 ATX/AT mode selection
JP1VIO1 P1PCI-X1 and P1PCI-X2 3.3V/5V VIO Selection
JP1VIO2 P2PCI-X1 and P2PCI-X2 3.3V/5V VIO Selection
Label Function
J2 Primary 1 PCI bus frequency selection
J5 Primary 2 PCI bus frequency selection
J3 Primary 1 PCI/PCI-X bus capability selection
J6 Primary 2 PCI/PCI-X bus capability selection
P1PCIX1, P1PCIX2 PCI-X Bus Capability and
Frequency Setting when they are set to PCI-X mode
PCI-X
(MHz) J3 J2
66 (1-2)
PCI-X mode is backward compatible with PCI
mode. Please see below for PCI frequency
setting when the add-on card has a PCI inter-
face.
J2 is (2-3): Supports only PCI 33 MHz
J2 is (1-2): Supports both PCI 33/66 MHz
100 OPEN
P2PCIX1, P2PCIX2 PCI-X Bus Capability and
Frequency Setting when they are set to PCI-X mode
PCI-X
(MHz) J6 J5
66 (1-2)
PCI-X mode is backward compatible with PCI
mode. Please see below for PCI frequency
setting when the add-on card has a PCI inter-
face.
J5 is (2-3): Supports only PCI 33 MHz
J5 is (1-2): Supports both PCI 33/66 MHz
100 OPEN
3.3V VIO 5V
VIO = 3.3V
3.3V VIO 5V
VIO = 5V
P1PCIX1, P1PCIX2 PCI Bus Capability and Frequency
Setting when they are set to PCI mode
PCI (MHz) J3 J2
33 (2-3) (2-3)
66 (2-3) (1-2)
P2PCIX1, P2PCIX2 PCI Bus Capability and Frequency
Setting when they are set to PCI mode
PCI (MHz) J6 J5
33 (2-3) (2-3)
66 (2-3) (1-2)