Advantech MIO-9290 User manual

User Manual
MIO-9290
Intel® 3rd Core™ i7/i5/i3 rPGA988,
5.25" MI/O SBC, DDR3/DDR3L, DP,
HDMI, DVI-I, 48-bit LVDS, 2 GbE, 4
USB3.0, 2 Mini PCIe, mSATA,
iManager, MIOe

MIO-9290 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2014
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel® is a trademark of Intel® Corporation.
AMI is a trademark of American Megatrends, Inc.
IBM, PC, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Microsoft Windows® is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
For more information on this and other Advantech products, please visit our websites
at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our support website at:
http://support.advantech.com/
This manual is for the MIO-9290.
Part No. 2006929010 Edition 1
Printed in China April 2014

iii MIO-9290 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

MIO-9290 User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Opera- thin of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
flatterer. Discard used batteries according to the manufacturer's instruc-
tions.

v MIO-9290 User Manual
Packing List
Before you begin installing your card, please make sure that the following materials
have been shipped:
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Optional MIOe Module
Part Number Description
MIOe-210-D6A1E 4 x RS232/422/485 2x RS422/485 with DSUB connector,
8-bit GPIO
MIOe-220-L3A1E 3 x GbE with RJ45 connector
MIOe-230-L0A1E 48-bit LVDS (default) or Display port (by request),
backlight power, 2 x USB 2.0
MIOe-DB5000-01A1E MI/O extension evaluation board
Optional Accessories
Part number Description
1700002155-01 SATA cable 30cm
1700018785 SATA power cable 35cm
1703100260 Internal USB cable 26cm
1700021399-01 RS-232 Tx/Rx only(COM5/6) cable 25cm
1910002596-01 POST F=M3*10L M=M3*5L B=5 H=19 ST Ni
96MPI3M-2.4-3M9T CPU i3-3120ME 2.4G 3M Dual Core
96MPI5-2.7-3M9T CPU i5-3610ME 2.7G 3M Dual Core
96MPI7M-2.3-6M9T CPU i7-3610QE 2.3G 6M Quad Core
96MPCM-2.2-2M9T CPU CELERON-1020E 2.2G 2M Dual Core
1 x MIO-9290 SBC
1 x SATA Cable 30cm (p/n: 1700002155-01)
1 x SATA Power Cable 35cm (p/n: 1700018785)
1 x Audio Cable 20cm (p/n: 1700019584)
2 x COM RS-232/422/485 Cable 22cm (p/n: 1701200220)
1 x Startup Manual (p/n: 2006929000)
1 x Mini Jumper(10pcs package) (p/n: 9689000002)
1 x Screw and stud pack (4 screws for Mini PCIe, 4 M3
studs and screws for MIOe module)
(p/n: 9666929000E)

MIO-9290 User Manual vi

vii MIO-9290 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 2
1.2.1 Functional Specifications .............................................................. 2
1.2.2 OS Support ................................................................................... 4
1.2.3 Mechanical Specifications............................................................. 5
1.2.4 Electrical Specifications ................................................................ 5
1.2.5 Environmental ............................................................................... 5
1.3 Block Diagram........................................................................................... 6
1.4 Board Layout: Dimensions ........................................................................ 6
Figure 1.1 MIO-9290 Mechanical Drawing (Top Side) ................ 6
Figure 1.2 MIO-9290 Mechanical Drawing (Bottom Side) ........... 7
Figure 1.3 MIO-9290 Mechanical Drawing (Coastline)................ 7
Chapter 2 Installation............................................9
2.1 Jumpers and Switches ............................................................................ 10
Table 2.1: Jumpers.................................................................... 10
Table 2.2: Switches ................................................................... 10
2.2 Connectors.............................................................................................. 10
Table 2.3: Connectors ............................................................... 10
2.3 Locating Connectors & Block Diagram ................................................... 11
Figure 2.1 MIO-9290L Connector Locations (Top Side)............ 11
Figure 2.2 MIO-9290 Connector Locations (Bottom Side)......... 12
Figure 2.3 MIO-9290U Connector Locations (Coastline)........... 12
2.4 Setting Jumpers ...................................................................................... 13
2.4.1 Jumper List and Setting .............................................................. 13
2.4.2 Switch List and Setting................................................................ 17
Chapter 3 AMI BIOS Setup .................................19
3.1 Introduction ............................................................................................. 20
Figure 3.1 Setup program initial screen..................................... 20
3.2 Entering Setup ........................................................................................ 21
3.2.1 Main Setup.................................................................................. 21
Figure 3.2 Main setup screen .................................................... 21
3.2.2 Advanced BIOS Features Setup................................................. 22
Figure 3.3 Advanced BIOS features setup screen .................... 22
Figure 3.4 ACPI Setting ............................................................. 23
Figure 3.5 CPU Configuration.................................................... 24
3.2.3 SATA Configuration .................................................................... 25
Figure 3.6 SATA Configuration.................................................. 25
Figure 3.7 AMT Configuration.................................................... 26
Figure 3.8 PCH-FW Configuration............................................. 27
Figure 3.9 USB Configuration.................................................... 28
Figure 3.10SMART Settings ....................................................... 29
Figure 3.11Embedded Controller Configuration ......................... 30
Figure 3.12Super IO Configuration............................................. 31
Figure 3.13Platform Misc Configuration ..................................... 32
Figure 3.14Serial Port Console Redirection ............................... 33
Figure 3.15CPU PPM Configuration........................................... 34
3.2.4 Chipset........................................................................................ 35
Figure 3.16Chipset Setup ........................................................... 35

MIO-9290 User Manual viii
Figure 3.17System Agent (SA) Configuration ............................ 36
Figure 3.18 Intel IGFX Configuration.......................................... 37
Figure 3.19LCD Control.............................................................. 38
Figure 3.20PCH-IO Configuration .............................................. 39
3.2.5 Boot Settings .............................................................................. 40
Figure 3.21Boot Setup Utility...................................................... 40
3.2.6 Security Setup ............................................................................ 41
Figure 3.22Password Configuration ........................................... 41
3.2.7 Save & Exit ................................................................................. 42
Figure 3.23Save & Exit............................................................... 42
Appendix A Pin Assignments............................... 45
A.1 Connector Tables.................................................................................... 46
Appendix B System Assignments........................ 71
B.1 System I/O Ports..................................................................................... 72
Table B.1: System I/O Ports ...................................................... 72
B.2 DMA Channel Assignments .................................................................... 72
Table B.2: DMA Channel Assignments ..................................... 72
B.3 1st MB Memory Map............................................................................... 73
Table B.3: 1st MB Memory Map ................................................ 73
B.4 Interrupt Assignments ............................................................................. 73
Table B.4: Interrupt Assignments .............................................. 73
Appendix C Watchdog Timer Sample Code ........ 75
C.1 Watchdog Timer Sample Code............................................................... 76

Chapter 1
1General Information
This chapter gives background
information on the MIO-9290.
Sections include:
Introduction
Specifications
Block diagram
Board layout and dimensions

MIO-9290 User Manual 2
1.1 Introduction
The MI/O Extension Single Board Computer MIO-9290 based on the 3rd generation
Intel® Core™ i3/i5/i7/Celeron rPGA988 processors with QM77 chipset, supports
either 2 channel 1600MHz DDR3 or low power DDR3L, 4 USB3.0, 2 SATA III (600
MB/s), AMT 8.0, and can drive three independent displays (DVI-I, Display Port,
HDMI) and Dual Display by any combination interface from the board.
MIO-9290 provides not only the powerful computing capability but is also a great
graphic capable platform. It is aimed at various high level embedded applications.
MIO-9290 adapts the newest solution from Intel with 22nm process, up to 15% CPU
performance gain over previous generation and contains the latest generation graph-
ics core (Intel® HD Graphics 4000) with DXVA (full AVC/VC-1/MPEG2 Hardware
Acceleration), OpenGL* 3.1 and DirectX 11 support. MIO-9290 is high-end level and
rich expansion positioning in 5.25“ SBC product line, the rich I/O including 4 USB 3.0/
2.0, 2 USB2.0, 2 SATA port up to 6Gb/s, 2 GbE, HD Audio, 6 COM, 2 full-size Mini
PCIe with mSATA support. Users also can extend Display port, 3 USB2.0, SMBus,
LPC and 4 x PCIex1 through Advantech’s innovative MI/O Extension interface. MIO-
9290 can help customers easily to implement high quality video or graphic applica-
tions along with single and simple integrated solution.
1.2 Specifications
1.2.1 Functional Specifications
Processor: Mobile 3rd Generation Intel® Core™ Processor (rPGA)
–i7 3610QE / i5 3610ME / i3 3120ME / Celeron 1020E
–Cache Hierarchy
∗A 32-KB instruction and 32-KB data first-level cache (L1) for each core
∗A 256-KB shared instruction/data second-level cache (L2) for each core
∗6MB / 3MB / 2MB Intel® Smart Cache for i7 / i5, i3 / Celeron series, shared among
all cores
–Direct Media Interface (DMI)
∗DMI 2.0 support
∗Four lanes in each direction
∗5 GT/s point-to-point DMI interface to PCH is supported
–Advanced Technologies
∗Intel® Hyper-Threading Technology 2-threads per core
∗Intel® Active Management Technology 8.0 (Intel® AMT 8.0, i7, i5 series only)
∗Intel® Trusted Execution Technology (Intel® TXT)
∗Intel® 64 Architecture
∗Thermal Monitoring Technologies
∗Enhanced Intel® SpeedStep® Technology
* Intel® Turbo Boost Technology

3 MIO-9290 User Manual
Chapter 1 General Information
Chipset: Intel® QM77 I/O Controller
–Direct Media Interface
∗Up to 20 Gb/s each direction, full duplex
∗Transparent to software
–Integrated Serial ATA Host Controller
∗Data transfer rates up to 6.0 Gb/s (600 MB/s)
∗Integrated AHCI controller
–USB
∗NEW: xHCI Host Controller, supporting SuperSpeed USB 3.0 ports
∗Two EHCI Host Controllers, supporting HighSpeed USB 2.0 ports
∗Supports wake-up from sleeping states S1–S4
∗Supports legacy Keyboard/Mouse software
–Power Management Logic
∗Supports Advanced Configuration and Power Interface (ACPI), Version 4.0a
∗ACPI-defined power states (processor driven C states)
∗ACPI Power Management Timer
∗SMI# generation
System Memory Support
–Non-ECC, DDR3/DDR3L memory with two SODIMM up to 16GB
–DDR3/DDR3L/DDR3L-RS at 1.35 V / 1.5 V Data Transfer Rates
∗1333 MT/s (PC3-10600), 1600 MT/s (PC3-12800)
–64-bit wide channels
–Intel® Fast Memory Access (Intel® FMA):
∗Just-in-Time Command Scheduling
∗Command Overlap
∗Out-of-Order Scheduling
–DDR3/DDR3L default is auto select, but have an option that can select as DDR3/
DDR3L by jumper (J1).
Graphic Engine
–DirectX* Video Acceleration (DXVA) support for accelerating video process-
ing
∗Full AVC/VC1/MPEG2 Hardware Acceleration
–OpenGL* 3.1 and OpenCL 11 support
–DirectX* 11, DirectX* 10.1, DirectX* 10, DirectX* 9 support
Display
–Multi-display interfaces: DVI-I, HDMI, display port on rear I/O, dual channel
24-bit LVDS on internal connector, display port from MIOe
–Support Extend and Clone mode with multi-display device
–Dual Independent Display
∗Any two combination between: VGA, LVDS, HDMI, display port (from Rear
I/O), display port (from MIOe)
–Triple Independent Display:
* DVI-I + HDMI + display port
* Triple independent display is not supported under XP with Ivy Bridge processor
* Sandy Bridge CPU didn’t support triple independent display.
–Integrated Dual LVDS channel support resolution up to 1920 x1080 at 60 Hz
–DVI-I output up to resolution 2560x1600 at 60 Hz. Can support Analog RGB
display (VGA) through adaptor.
–Display Port (DP) supports resolution up to 1920 x 1200 at 60 Hz.
* Ivy Bridge CPU didn’t support DP display under DOS
* Display Port on rear I/O didn’t support hot plug and audio function because it used
Embedded DisplayPort (eDP) from processor connecting to DP connector, Intel eDP
didn’t support it.

MIO-9290 User Manual 4
–HDMI interface supports the HDMI 1.4a specification with audio up to 2560x1600 at
60 Hz
Gigabit Ethernet
–Port1: QM77 (MAC) + 82579LM GbE (PHY)
∗Integrated ASF Management Controller
∗10/100/1000 BASE-T IEEE 802.3 specification conformance
∗Energy Efficient Ethernet (EEE) IEEE802.3az support [Low Power Idle
(LPI) mode]
∗Supports up to 9 KB jumbo frames (full duplex)
–Port2: I210-IT Gigabit Ethernet Controller
∗IEEE 802.3az Energy Efficient Ethernet (EEE)
∗Audio-video bridging
∗IEEE 1588/802.1AS precision time synchronization
∗EEE 802.3Qav traffic shaper (with software extensions)
∗Supports up to 9.5 KB jumbo frames
Peripheral interface
–MIOe Expansion
∗Display Port
∗4 PCIe x1
∗3 USB 2.0
∗LPC
∗HD Audio: Line out
∗SMBus
∗Power: +5/+12Vsb
–2 x Serial-ATA port, up to 6.0 Gb/s (600 MB/s)
–4 x USB 3.0/USB2.0 compliant ports on rear I/O, 2 x USB2.0 compliant ports
for internal connection
–2 RS-232 from COM1/2, 2 RS-232/422/485 from COM3/4 (ESD protection for
RS-232: Air gap ±15kV, Contact ±8kV), 2 RS-232 from COM5/6 with Tx/Rx
only
–16-bit Programmable General Purpose Input/ Output
–Watchdog timer: Output System Reset, Programmable counter from 1 ~ 255
minutes/ seconds
–Mini PCIe
∗2 x Full-size Mini PCIe (Both support mSATA, one is with SIM holder)
* Mini PCIe/mSATA default is auto select, but have an option that can select as mini-
PCIe or mSATA by 4pins switch, default as Mini PCIe.
High Definition Audio:
–Intel® High Definition Audio Interface
–High Definition Audio Codec with Realtek proprietary loss-less content pro-
tection technology
–Support 1 x Line-input, 1 x Line output, 1 x Mic-input
BIOS
–AMI 64-Mbit SPI Flash BIOS
1.2.2 OS Support
MIO-9290 supports Win 8, Win 7, Win XP, WES7 and WE8S.
For further information about OS support of MIO-9290, please Advantech website:
http://support.advantech.com.tw/ or contact the technical support center.

5 MIO-9290 User Manual
Chapter 1 General Information
1.2.3 Mechanical Specifications
Dimensions: 203 x 146 mm (8" x 5.75")
Height: Top Side: 33.12 mm (with cooler); Bottom Side: 9.9 mm
Weight: 0.9 kg (1.98 lb) (reference weight of total package)
1.2.4 Electrical Specifications
Power Requirement: Single +12V DC ± 10% power input
Power Consumption:
–Max load
* i7 3610QE w/DDR3: 3.759 A @ 12 V (45.11 W), w/DDR3L: 3.675 A @ 12 V (44.1
W)
* i5 3610ME w/DDR3: 2.375 A @ 12 V (28.5 W), w/DDR3L: 2.336 A @ 12 V
(28.03 W)
* i3 3120ME w/DDR3: 1.675 A @ 12 V (20.1 W), w/DDR3L: 1.656 A @ 12 V
(19.87 W)
* Celeron 1020E w/DDR3: 1.595 A @ 12 V (19.14 W), w/DDR3L: 1.548 A @
12 V (18.58 W)
–Idle mode
* i7 3610QE w/DDR3: 0.646 A @ 12 V (7.75 W), w/DDR3L: 0.662 A @ 12 V (7.94 W)
* i5 3610ME w/DDR3: 0.614 A @ 12 V (7.37 W), w/DDR3L: 0.606 A @ 12 V
(7.27 W)
* i3 3120ME w/DDR3: 0.622 A @ 12 V (7.46 W), w/DDR3L: 0.612 A @ 12 V
(7.34 W)
* Celeron 1020E w/DDR3: 0.632 A @ 12 V (7.58 W), w/DDR3L: 0.623 A @
12 V (7.48 W)
Power Consumption Conditions:
–Max. load: Measure the current value when system in windows mode and
running HCT12 system stress
–Idle mode: Measure the current value when system in windows mode and
without running any program
RTC Battery:
–Typical Voltage: 3.0 V
–Normal discharge capacity: 210 mAh
1.2.5 Environmental
Operating Temperature: 0 ~ 60°C (32 ~ 140°F)
Operating Humidity: 40°C @ 85% RH Non-Condensing
Storage Temperature: Storage temperature: -40~85°C
Storage Humidity: Relative humidity: 95% @ 60°C

MIO-9290 User Manual 6
1.3 Block Diagram
1.4 Board Layout: Dimensions
Figure 1.1 MIO-9290 Mechanical Drawing (Top Side)
48-bit LVDS
DP DDR3/DDR3L
SODIMM x2
Intel Ivy Bridge
Mobile rPGA
Intel QM77
Panther Point
Mobile PCH
COM1/2: RS232
COM3/4: RS232/422/485
COM5/6: RS-232 Tx/Rx only
Super I/O
SCH3106
eDP
DVI-I Display port
VGA
HDMI Display port
PCA955516-bit GPIO SMBus
MiniPCIe or mSATA
(Full size)
PCIe x1, SATA
USB 2.0
MiniPCIe or mSATA
(Full size)
With SIM holder
PCIe x1, SATA
USB 2.0
64Mbit BIOS SPI
4 USB 3.0 USB 3.0 & 2.0
2 USB 2.0 USB 2.0
2 SATA SATA 6Gb/s
DMI
FDI
MIOe
Realtek ALC 892
PHY: Intel
82579LM
Line -in
Line out
Mic-in
RJ45
Display port
HD Audio, Line Out
USB 2.0 x 3
SMBus
LPC
4 PCIe x 1
HD Audio
PCIe x 1
GbE: Intel
I-210
Advantech
iManager SMBus/I2C
RJ45
PCIe x 1
LPC

7 MIO-9290 User Manual
Chapter 1 General Information
Figure 1.2 MIO-9290 Mechanical Drawing (Bottom Side)
Figure 1.3 MIO-9290 Mechanical Drawing (Coastline)

MIO-9290 User Manual 8

Chapter 2
2Installation
This chapter explains the setup
procedures of the MIO-9290 hard-
ware, including instructions on
setting jumpers and connecting
peripherals, switches and indica-
tors. Be sure to read all safety pre-
cautions before you begin the
installation procedure.

MIO-9290 User Manual 10
2.1 Jumpers and Switches
The MIO-9290 has a number of jumpers and switches that allow you to configure
your system to suit your application. The table below lists the functions of the various
jumpers.
* DDR3/DDR3L default is auto select, but have an option that can select as DDR3/
DDR3L by jumper.
2.2 Connectors
Onboard connectors link the MIO-9290 to external devices such as hard disk drives,
a keyboard, or floppy drives. The table below lists the function of each of the board's
connectors.
Table 2.1: Jumpers
J1 DDR3/DDR3L Setting *
J2 Auto Power On Setting
J3 COM4 RS232/422/485 Setting
J4 COM4 RS232/422/485 Setting
J5 COM4 RS232/422/485 Setting
J6 COM3 RS232/422/485 Setting
J7 COM4 RS232/422/485 Setting
J8 COM3 RS232/422/485 Setting
J9 Clear CMOS
J10 LCD Power
Table 2.2: Switches
SW1 COM4 RS485 TERMINATION PU/PD
SW2 COM3 RS485 TERMINATION PU/PD
SW5 CN38 PCIE/ mSATA SELECTION
SW6 CN29 PCIE/ mSATA SELECTION
Table 2.3: Connectors
Label Function
CN1 12V Power Input
CN2 COM3/COM4
CN3 COM1/COM2
CN5 Audio
CN7 COM5 TX/RX
CN8 COM6 TX/RX
CN14 CPU Socket
CN15 CPU FAN
CN16 Reset
CN17 Power Switch
CN18 48 bits LVDS Panel
CN19 System FAN
CN20 SMBus
CN21 Inverter Power Output

11 MIO-9290 User Manual
Chapter 2 Installation
2.3 Locating Connectors & Block Diagram
Figure 2.1 MIO-9290L Connector Locations (Top Side)
CN22 LAN
CN23 External USB2.0+USB3.0
CN24 External USB2.0+USB3.0
CN25 Display Port
CN26 HDMI
CN27 DVI-I
CN29 Mini PCIE
CN30 SATA
CN31 SATA
CN32 GPIO
CN33 GPIO
CN34 SATA Power
CN35 SATA Power
CN36 SIM Card
CN37 Internal USB
CN38 Mini PCIE
CN39 MIOe
Table 2.3: Connectors
DDR3
SODIMM CN2 CN3
CN1
CN7
CN8
CN5
CN15
CN16
CN17
CN19
Power
Button Reset
Button
Throttling Alarm/HDD LED
CN25
CN27
CN26
CN22
CN20
CN21
CN18
J1 J2
J4, J5, J3, J6
J8, J7
SW2, SW1
J10
J9
CN24CN23

MIO-9290 User Manual 12
Figure 2.2 MIO-9290 Connector Locations (Bottom Side)
Figure 2.3 MIO-9290U Connector Locations (Coastline)