Advantech MIC-300 Installation and operation manual

MIC-300 Startup Manual 1
Before installation, please ensure that the following items
have been included in your shipment:
1. 1 x MIC-300 serial
2. 1 x Startup manual
If any of the above items are missing or damaged, contact
your distributor or sales representative immediately.
1. Put this equipment on a reliable surface during installa-
tion. Dropping it or letting it fall may cause damage
2. Make sure the voltage of the power source is correct
before connecting the equipment to the power outlet
3. If the equipment is not used for a long time, disconnect
it from the power source to avoid damage by transient
overvoltage
MIC-300
3U Height CompactPCI®Serial Enclosure for 3U Cards
Startup Manual
Standard Functions
• Interface supported: PCIe (Gen3), SATA (Gen3),
USB2.0/USB3.0, Ethernet (10GBase-T)
• Backplane Type: 7-slot or 9-slot CompactPCI Serial
backplane with Ethernet Star, single star, without RIO
• Connector Type: AirMax VS
• Power: Power backplane for AC/DC CPCI-Serial Power
module.
• 12V Main: 6.65 A per slot
• 5V standby: 0.95A per slot
Mechnical and Environment
• Operating temperature:: 0 ~ 70° C (32 ~ 158° F)
• Storage Temperature: -40 ~ 85° C (-40 ~ 185° F)
• Humidity: 95% @ 40° C (non-condensing)
• Humidity (Non-operating): 95% @ 60° C (non-con-
densing)
• Cooling: 12 removable low noise mini-fans can be as-
sembled on the top and bottom side of chassis
• Random Vibration (operation): 5~500Hz, 2Grms, 3
axes
• Shock (Operation): 10G, 11ms
• EMC & Safety: design to meet EN50155/EN50121-4
PN Description Chassis
Slot TY
Backplane
slot
MIC-300S1-S1
MIC-300
3U CPCI-S
Chassis with 9
Slot BP
21 9
MIC-300S1-S2
MIC-300
3U CPCI-S
Chassis with 7
Slot BP
11 7
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support services, please visit our support
website at:
http://support.advantech.com
This manual is for the MIC-300 Series.
Part No. 2041030000
Printed in China
Edition 1
August 2022
Safety Instructions
Specications
Ordering Information

2 MIC-300 Startup Manual
Option 1: 21-Slot Chassis 9 slot backplane
• CompactPCI Serial with Ethernet Star, single star, without RIO
• Connector Type:AirMax VS
• System Slot: Right
• Number of Slots: 9
Backplane Topolog

MIC-300 Startup Manual 3
Option 1: 11-Slot Chassis 7 slot backplane
• CompactPCI Serial with Ethernet Star, single star, without RIO
• Connector Type:AirMax VS
• System Slot: Right
• Number of Slots: 7
Backplane Topolog (Cont.)

4 MIC-300 Startup Manual
P1~P3 is AC power input pin, P4~P5 is DC power input pin. For The power input from PSU back-end connector, the P1~P3
isconnectedtotheAcpowerlterattherearofthechassisbydefault.ThesetupsupportsbothACpowerandtheDCpower
that can support front panel input. If DC power supply is used and it need input from DC power supply back-end connector,
the P4~P5 need to be connect to the connector at the rear of the chassis, the SKU is not currently available for standard, it
need to customize.
Boundary dimension:
21 slot chassis length x width×height = 482.60 x 251.50 x 132.55 mm (unit: mm)
7 slot chassis length x width×height=279.40 x 254.50 x 132.55 mm (unit: mm)
MIC-300-S1S1 MIC-300-S1S2
Unit: mm
482.6 ±0.5
465.00±0.4
37.7057.15±0.4
132.55±0.4
251.50 42.66
132.55±0.4
279.40±0.4
261.80±0.5
57.15±0.25
238.69
232.60
254.50
294.16
Power Backplane and Power Adapter Board
Dimensions