Advantech MOS-2110Z-1201E User manual

MOS-2110Z-1201E USB iDoor module, 2-Ch, PCIe I/F
User Manual
MOS-2110Z-1201E provides a simple method of adapting two USB 2.0 devices to a modern PCIe x 1 port. It accomplish by
incorporating the industry standard PCIe bridge chip. It is compliant with USB 2.0 specification, with xHCI (eXtensible Host
Controller Interface) specifications rev. 0.96.
MOS-2110Z-1201E supports simultaneous operation of multiple USB 2.0 and USB 1.1 devices, it can expands two external
USB 2.0 Hi-Speed ports on the system. Each USB port supplies maximum +5V/ 500mA power output to USB device.
Besides, MOS-2110Z-1201E support hot-swapping feature allows to connect/ disconnect devices without powering down
the system
MOS-2110Z-1201E
USB controller miniPCIe card x1
USB wire cable with I/O bracket x1
Startup Manual x 1
Note: If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
You should find the following items inside the shipping package:
USB controller miniPCIe card x1
USB wire cable with I/O bracket x1
Startup Manual x 1
The MOS-2110Z-1201E card harbors certain electronic components vulnerable to electrostatic discharge (ESD). ESD
could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention
to.
Before removing the card from the antistatic plastic bag, you should take following precautions to ward off possible ESD
damage:
Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your
body. Or one can also use a grounding strap.
Touch the anti-static bag to a metal part of your computer chassis before opening the bag.
Take hold of the card only by the metal bracket when removing it out of the bag.
After taking out the card, first you should:
Inspect the card for any possible signs of external damage (loose or damaged components, etc.). If the card is visibly
damaged, please notify our service department or our local sales representative immediately. Avoid installing a damaged
card into your system.
2. Initial Inspection
1. Packing List
MOS-2110Z-1201E User Manual 1

Also pay extra caution to the following aspects to ensure proper installation:
Avoid physical contact with materials that could hold static electricity such as plastic, vinyl and Styrofoam.
Whenever you handle the card, grasp it only by its edges. DO NOT TOUCH the exposed metal pins of the connector
or the electronic components.
Note!
Advantech provides WDM CAN driver that allows you to configure your hardware and store the settings in your Windows
registry. You must install the WDM CAN driver if you want to add and manage Advantech CAN cards.
3.1 Driver Installation
For MOS-2110Z-1201E driver download, please visit Advantech website:
http://support.advantech.com/Support/SearchResult.aspx?keyword=MOS-2110Z-1201E&searchtab
s=BIOS,Certificate,Datasheet,Driver,Firmware,Manual,Online%20Training,Software%20Utility,Utility,
FAQ,Installation,Software%20API,Software%20API%20Manual,3D%20Model&select_tab=Driver
4.1 Switch and Jumper Settings
MOS-2110Z-1201E PCIe to 2-Ch USB 2.0 module (Unit: mm):
USB1_2 Pin #
Signal Name
USB1_2 Pin #
Signal Name
1
+VCC5_USB
2
+VCC5_USB
3
USB2_DM1
4
USB2_DM2
5
USB2_DP1
6
USB2_DP2
7
GND
8
GND
9
GND
10
GND
Figure 4.1: Card Connector, Jumper and Switches
3. Installation & Setup
Installation
4. Signal Connections
Keep the anti-static bag for future use. You might need the original bag to store the card if you have to remove the
card from PC or transport it elsewhere.
MOS-2110Z-1201E User Manual 2

Figure 4.2: Physical Dimension
4.2 Signal connections
4.2.1 Pin Assignment
The pins are numbered as shown in the table below.
Figure 4.3: USB I/O Connector
Table 4.2: MOS-2110Z-1201E Pin Definition
USB 1 Pin #
Signal Name
USB 2 Pin #
Signal Name
1
+VCC5_USB
1
+VCC5_USB
2
USB_D-
2
USB_D-
3
USB_D+
3
USB_D+
4
GND
4
GND
1 4 1 4
MOS-2110Z-1201E User Manual 3

Below Figure shows the operation of Advantech EXM-522 2-Ch USB 2.0 module from the system level, including the major
hardware blocks.
Figure 5.1 System Block Diagram
Figure 5.2 Power Distribution
MOS-2110Z-1201E User Manual 4
Appendix. System Block Diagram