Advantech PCM-3526 Installation and operation manual

1 PCM-3526 Startup Manual P/N:2006352600
PCM-3526 TFT to VGA Module
Startup Manual
Before you begin installing your card, please make sure
that the following materials have been shipped:
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
Note 1: For detailed contents of the PCM-3526, please
refer to the enclosed CD Disc or disk (in PDF for-
mat).
Note 2: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/read-
step.html(Acrobat is a trademark of Adobe.)
Mechanical and Environmental
• Dimensions (L x W): 72 x 62 mm (3.8" x 3.5")
• Weight: 30g
• Operating Temperature: 0 ~ 60°C(32~140°F)
• Storage temperature: -40 ~ 85°C(-40~185°F)
• Operating Humidity: 0%~90% ralative humity,
non-condensing
• Power Supply Voltage: 5V or 12V
• Power Requirements: 6 ~ 12V @600mA (9V Recom-
mended)
•Chipset: Analog Devices ADV7123KST140
•TFT Input: 24,18bit TFT
•VGA output: 15-pin D-SUB VGA output
•Resolution :1024 x 768, 800 x 600, 640 x 480
•TFT Conector: Hirose or Pin Header
•External Power: +5V, +12V
• Connector ESD Keypad connector for OSD control
• LCD connector Hirose or pin header
• Touch Screen Supported
VGA to TFT panel transfer module
Touch Screen and OSD (cable optional) support
Suitable for TFT LCD Panel Adapter
Packing List Specifications
• 1 PCM-3526
• 1 Startup manual
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/eservice/
This manual is for the PCM-3526 series Rev. A1.
Part No. 2006352600 1st Edition
Sep. 2004
Features
PCM-3526 TFT to VGA Module PCA-6773 ISA IntelPCM-3351 SBC 3351 SBC Low Power Intel Tilamook

2 PCM-3526 Startup Manual P/N:2006352600
Connectors on the board link it to external devices, such
as hard disk drives, a keyboard or expansion bus connec-
tors. In addtion, the board has a number of jumpers that
allow you to configure your system to suit your application.
The table below lists the function of each of the jumpers
and connectors.
Dimensions
Component Placement
Jumpers & Connectors
Connectors
Label Function
CN1 LCD Connector of 44-pin Header
CN2 External Power Connector
CN3 LCD Connector of 40-pin HIROSE
CN4 VGA Connector
Jumpers
Label Function
J1 5V Power Source Selector
J2 Power Selector of ADV7123
J3 Active Level Selector of VSYNC
J4 Active Level Selector of HSYNC
J5 Shift Clock invert
J6 Shift Clock bypass capacitor
Board Layout