Advantech EPC-S201 User manual

User Manual
EPC-S201
Fanless Embedded PC

EPC-S201 User Manual ii
Attention!
Please note:
This package contains a hard-copy user manual in Chinese for China CCC certifica-
tion purposes. There is an English user manual included as a PDF file on the web-
site. Please disregard the Chinese hard copy user manual if the product is not to be
sold and/or installed in China.

iii EPC-S201 User Manual
Copyright
The documentation and the software included with this product are copyrighted 2017
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated or transmitted in any
form or by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reliable. However,
Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements
of the rights of third parties, which may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Part No. 2006S20100 Edition 1
Printed in China March 2019

EPC-S201 User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered (for example, CPU
speed, Advantech products used, other hardware and software used, etc.). Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

v EPC-S201 User Manual
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or the Advantech customer ser-
vice center for technical support if you need additional assistance. Please have
the following information ready before you call:
–Product name and serial number.
–Description of your peripheral attachments.
–Description of your software (operating system, version, application software,
etc.).
–A complete description of the problem.
–The exact wording of any error messages.
Warnings, Cautions and Notes
Packing List
Before installation, please ensure the following items have been shipped:
1 x EPC-S201 unit
1 x China RoHS
Warning! Warnings indicate conditions, which, if not observed, can cause per-
sonal injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.

EPC-S201 User Manual vi
Ordering Information
*Optional Accessories
For EPC-S201
*Optional: default not included
Model Number Description
EPC-S201M00-S1A1E Intel N3350 1.1GHz EPC, 12VDC,VGA,DIO,2 COM port
Part Number Description
96PSA-A60W12P2-1 DC power 12V/5A 60W, 0 ~ 40 °C, w/ Phoneix type power con-
nector
1702002600-01 Power cable 3-pin 183 cm, USA type
1700018704 Power cable 3-pin 180 cm, UK type
1702002605 Power cable 3-pin 183 cm, Europe type
1700000237-01 Power cable 3-pin 183 cm, PSE type
EWM-W135F01E WIFI Module: 802.11 a/b/g/n, Atheros AR9382, 2T2R
1750008717-01 External Antenna, Dipole Ant. D.B 2.4/5G WIFI 3dBi
1750006043 SMA Cable, R-SMA(F)/MHF 1.32 150mm

vii EPC-S201 User Manual
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Use a damp
cloth. Don’t use liquid or sprayed detergent for cleaning. Use a moisture sheet
or cloth for cleaning.
4. For pluggable equipment, the socket-outlet should be near the equipment and
easily accessible.
5. Please keep equipment away from humidity.
6. Place this equipment on a reliable surface when installing. A drop or fall may
cause injury.
7. The openings on the enclosure are for air convection to protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Check the voltage of the power source when connecting the equipment to the
power outlet.
9. Make sure to connect the power cord to a socket-outlet with an earthing connec-
tion.
10. Place the power cord in such a way that people cannot step on it. Do not place
anything over the power cord.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect the equipment from mains
to avoid damage from transient over-voltage.
13. Never pour any liquid into ventilation openings; this may cause fire or electrical
shock.
14. Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
15. Before any internal installation procedures are carried out on the system, make
sure the system is turned off and cools down for 15 minutes. Failing to turn off
the system before opening can cause permanent damage to the system and
serious or fatal injury to the user.
16. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
17. Do not leave this equipment in an environment where the storage temperature
may go below -40° C (-40° F) or above 85° C (185° F). This could damage the
equipment.The equipment should be kept in a controlled environment.
18. Caution: There is the danger of an explosion if battery is incorrectly replaced.
Replace only with the same or an equivalent type recommended by the manu-
facturer. Discard used batteries according to the manufacturer's instructions.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a BATTERY with an incorrect type that can defeat a SAFE-
GUARD (for example, in the case of some lithium BATTERY types);
Disposal of a BATTERY into fire or a hot oven, or mechanically crushing or
cutting of a BATTERY, can result in an EXPLOSION;

EPC-S201 User Manual viii
Leaving a BATTERY in an extremely high temperature surrounding environ-
ment that can result in an EXPLOSION or the leakage of flammable liquid or
gas;
A BATTERY subjected to extremely low air pressure that may result in an
EXPLOSION or the leakage of flammable liquid or gas.
19. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
20. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
21. This equipment is not suitable for use in locations where children are likely to be
present.
22. Suitable for installation in Information Technology Rooms in accordance with
Article 645 of the National Electrical Code and NFPA 75
23. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan-
tech disclaims all responsibility for the accuracy of any statements contained
herein.
Instructions de sécurité
1. Veuillez lire attentivement ces instructions de sécurité.
2. Veuillez conserver ce manuel de l'utilisateur pour toute référence ultérieure.
3. Veuillez déconnecter cet équipement de la prise secteur avant le nettoyage, uti-
lisez un chiffon humide, n'utilisez pas de détergent liquide ou pulvérisé pour le
nettoyage, utilisez une feuille d'humidité ou un chiffon pour le nettoyer.
4. Pour les équipements enfichables, la prise de courant doit se trouver à proxim-
ité de l'équipement et doit être facilement accessible.
5. Veuillez garder cet équipement de l'humidité.
6. Posez cet équipement sur une surface fiable lorsqu'il est installé.
7. Les ouvertures de l'enceinte sont destinées à la convection de l'air et protègent
finalement l'équipement contre la surchauffe.
8. Assurez-vous de la tension de la source d'alimentation lorsque vous connectez
l'équipement à la prise secteur.
9. Assurez-vous de connecter le cordon d'alimentation à une prise de courant
avec connexion à la terre
10. Placez le cordon d'alimentation de manière à ce que les personnes ne puissent
pas marcher dessus. Ne placez rien sur le cordon d'alimentation.
11. Toutes les précautions et tous les avertissements sur l'équipement doivent être
notés.
12. Si l'appareil n'est pas utilisé pendant une longue période, débranchez-le du
secteur pour éviter d'être endommagé par une surtension transitoire.
13. Ne jamais verser de liquide dans les ouvertures de ventilation, cela pourrait pro-
voquer un incendie ou un choc électrique.
14. N'ouvrez jamais l'appareil.Pour des raisons de sécurité, seul le personnel de
maintenance qualifié doit ouvrir l'équipement.
15. Avant d'effectuer toute procédure d'installation interne sur le système, assurez-
vous que le système est éteint et refroidi pendant 15 minutes, sans quoi le sys-
tème risque d'être endommagé de manière permanente et de provoquer des
blessures graves ou mortelles. L'utilisateur
16. Si l'une des situations suivantes se présente, faites vérifier l'équipement par le
personnel de service:
Le cordon d'alimentation ou la fiche est endommagé.
Le liquide a pénétré dans l'équipement.

ix EPC-S201 User Manual
Equipment L'équipement a été exposé à l'humidité.
Equipment L'équipement ne fonctionne pas bien ou vous ne pouvez pas le
faire fonctionner conformément au manuel de l'utilisateur.
Equipment L'équipement est tombé et est endommagé.
Equipment L'équipement présente des signes évidents de rupture.
17. Ne laissez pas cet appareil dans un environnement où la température de stock-
age peut être inférieure à -40 ° C (-40° F) ou supérieure à 85 ° C (185° F), ce qui
pourrait endommager l'équipement. Environnement contrôlé
18. Attention: Danger d'explosion si la batterie n'est pas remplacée correctement
Remplacez uniquement par un type identique ou équivalent recommandé par le
fabricant, jetez les piles usagées conformément aux instructions du fabricant.
Risque d'explosion si la batterie est remplacée par un type incorrect
Remplacement d'une BATTERIE par un type incorrect pouvant neutraliser un
SAFEGUARD (par exemple dans le cas de certains types de BATTERIE au
lithium);
La mise au rebut d'une BATTERIE au feu ou dans un four chaud, ou le broy-
age ou la découpe mécanique d'une BATTERIE, pouvant entra?ner une
EXPLOSION;
Laisser une BATTERIE dans un environnement extrêmement chaud pouvant
entraîner une EXPLOSION ou une fuite de liquide ou de gaz inflammable;
Une BATTERIE </ RTI> est une pression d'air extrêmement basse qui peut
provoquer une EXPLOSION ou une fuite de liquide ou de gaz inflammable.
19. Le niveau de pression acoustique au poste de conduite conformément à la
norme CEI 704-1: 1982 ne dépasse pas 70 dB (A).
20. ZONE D'ACCÈS RESTREINTE: L'équipement ne doit être installé que dans
une zone d'accès restreint.
21. Cet équipement ne peut pas être utilisé dans des endroits où des enfants sont
susceptibles d'être présents.
22. Convient à une installation dans des salles informatiques conformément à l'arti-
cle 645 du Code national de l'électricité et à la norme NFPA 75
23. AVIS DE NON-RESPONSABILITÉ: Cet ensemble d'instructions est conforme à
la norme CEI 704-1. Advantech décline toute responsabilité concernant l'exacti-
tude des déclarations contenues dans ce document.

EPC-S201 User Manual x

xi EPC-S201 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.2.1 General ......................................................................................... 2
1.2.2 Display .......................................................................................... 3
1.2.3 Ethernet ........................................................................................ 3
1.3 Chipset ...................................................................................................... 3
1.3.1 Functional Specification ................................................................ 3
1.3.2 WISE-PaSS/RMM......................................................................... 4
1.4 Mechanical Specifications......................................................................... 4
1.4.1 EPC-S201 Dimensions ................................................................. 4
Figure 1.1 EPC-S201 Mechanical Dimension Drawing ............... 4
1.4.2 Weight........................................................................................... 4
1.5 Power Requirement .................................................................................. 4
1.5.1 System Power............................................................................... 4
1.5.2 RTC Battery .................................................................................. 4
1.6 Environment Specification......................................................................... 5
1.6.1 Operating Temperature................................................................. 5
1.6.2 Relative Humidity .......................................................................... 5
1.6.3 Storage Temperature.................................................................... 5
1.6.4 Vibration during Operation ............................................................ 5
1.6.5 Shock during Operation ................................................................ 5
1.6.6 Safety............................................................................................ 5
1.6.7 EMC.............................................................................................. 5
Chapter 2 H/W Installation....................................7
2.1 Introduction ............................................................................................... 8
2.2 Jumpers .................................................................................................... 8
2.2.1 Jumper Description ....................................................................... 8
2.2.2 Jumper List ................................................................................... 9
Table 2.1: Jumper Setting ........................................................... 9
2.2.3 Jumper Location ........................................................................... 9
Figure 2.1 Jumper Layout............................................................ 9
2.2.4 Jumper Setting.............................................................................. 9
2.3 I/O Introduction........................................................................................ 10
Figure 2.2 EPC-S201 Front View .............................................. 10
Figure 2.3 EPC-S201 Rear View ............................................... 10
2.4 EPC-S201 External I/O ........................................................................... 10
2.4.1 Power On/Off Button................................................................... 10
Figure 2.4 Power On/Off Switch Button..................................... 10
2.4.2 Power Input Connector ............................................................... 10
Figure 2.5 Power Input Connector............................................. 10
2.4.3 Ethernet Connector (LAN) .......................................................... 11
Figure 2.6 Ethernet Connector (LAN) ........................................ 11
Table 2.2: Ethernet Connector (LAN) Pin Definition.................. 11
2.4.4 USB 3.0 Connector ..................................................................... 11
Figure 2.7 USB Connector......................................................... 11
Table 2.3: USB Connector Pin Definition .................................. 11
2.4.5 Audio Connector ......................................................................... 12
Figure 2.8 Audio Connector....................................................... 12
Table 2.4: Audio Connector Pin Definition................................. 12
2.4.6 COM Connector .......................................................................... 13
Figure 2.9 COM Connector........................................................ 13

EPC-S201 User Manual xii
Table 2.5: COM Connector Pin Definition ................................. 13
2.4.7 HDMI Connector......................................................................... 13
Figure 2.10 HDMI Connector...................................................... 13
Table 2.6: HDMI Connector Pin Definition ................................ 14
2.4.8 Power LED Indicators................................................................. 14
Figure 2.11 Power LED Indicators.............................................. 14
2.4.9 Antenna Hole.............................................................................. 14
Figure 2.12 Antenna Hole........................................................... 14
2.4.10 Digital In-put/Output (DIO) Connector ........................................ 15
Figure 2.13 DIO Connector Pin Definition .................................. 15
Table 2.7: DIO Connector Pin Definition ................................... 15
2.4.11 VGA Connector........................................................................... 15
Figure 2.14 VGA Connector ....................................................... 15
Table 2.8: VGA Connector Pin Definition .................................. 15
2.5 Installation............................................................................................... 16
2.5.1 Memory Installation..................................................................... 16
Figure 2.15 Loosen Screws, Open TOP Case ........................... 16
Figure 2.16 Install Memory ......................................................... 16
2.5.2 RAM Installation.......................................................................... 17
Figure 2.17 Loosen Screws, Open Bottom Case ....................... 17
2.5.3 Din Rail Installation (Optional) .................................................... 18
2.5.4 Wall Mount Installation (Optional)............................................... 18
Chapter 3 BIOS Settings .................................... 19
3.1 BIOS Setup ............................................................................................. 20
Figure 3.1 Setup Program Initial Screen ................................... 20
3.2 Entering Setup ........................................................................................ 21
3.2.1 Main Setup.................................................................................. 21
Figure 3.2 Main Setup Screen................................................... 21
3.2.2 Advanced BIOS Features Setup................................................. 22
Figure 3.3 Advanced BIOS Features Setup Screen.................. 22
Figure 3.4 ACPI Setting............................................................. 23
Figure 3.5 First Serial Port Configuration(SCH3114) ................ 24
Figure 3.6 CPU Configuration ................................................... 27
Figure 3.7 Network Configuration Settings................................ 28
Figure 3.8 CSM Configuration Settings..................................... 29
Figure 3.9 Security Configuration Settings ................................ 31
3.2.3 Chipset Configuration ................................................................. 32
Figure 3.10 Chipset Configuration.............................................. 32
Figure 3.11 North Bridge Configuration...................................... 33
Figure 3.12 South Bridge Configuration ..................................... 33
Figure 3.13 Uncore Configuration .............................................. 34
Figure 3.14 South Cluster Configuration .................................... 35
Figure 3.15 HD-Audio Configuration Settings ............................ 36
Figure 3.16 PCI Express Configuration ...................................... 37
Figure 3.17 SATA Drives Settings.............................................. 38
Figure 3.18 USB Configuration Settings..................................... 39
Figure 3.19 Miscellaneous Configuration Settings ..................... 40
3.2.4 Security....................................................................................... 41
Figure 3.20 Security Settings ..................................................... 41
3.2.5 Boot ............................................................................................ 42
3.2.6 Save & Exit ................................................................................. 43
Figure 3.21 Save & Exit.............................................................. 43
Appendix A Watchdog Timer Sample Code ........ 45
A.1 Watchdog Timer Sample Code............................................................... 46

xiii EPC-S201 User Manual
Appendix B SUSI API Introduction .......................49
B.1 SUSI API Introduction ............................................................................. 50
B.1.1 The Watchdog API...................................................................... 50
B.1.2 The Hardware Monitor API ......................................................... 50

EPC-S201 User Manual xiv

Chapter 1
1General Introduction
This chapter gives background
information on the EPC-S201
series.

EPC-S201 User Manual 2
1.1 Introduction
EPC-S201 is a small, fan-less embedded system. The size is no bigger than the palm
of a hand and it supports Din rail/wall/desk mounting. EPC-S201 I/O is at the front
and side, which is suitable for Din rail assembly or other types of mounting. Reserve
I/O ports are able to be upgraded with extension modules by demand. EPC-S201 is a
semi-industrial system that allows for further extensions and is then equipped inside
the machine cabinet. This system targets markets like Factory Automation, Equip-
ment Integration, KIOSKs, and other space limited machine equipment.
Easy & Simple Design
The EPC-S201 is powered by Intel® Celeron® N3350 to offer high performance with
low power consumption. Palm-sized system dimensions are designed to let users
perform installation in space limited environments.
EPC-S201 supports up to 2 COM port, offers 2 USB 3.0 , 1 GbE LAN , 1 x MINIPCIe,
1x mSATA for storage, and 1 SO-DIMM Memory socket for an extension module
which provides multiple choice for satisfying different kind of usage for users.
For EPC-S201, the default power input is 12V DC in.
EPC-S201 passes worldwide certification including CE/FCC, VCCI and plan to have
CB, UL, CCC and BSMI.
Multiple Display Support
EPC-S201 supports up to two display types: VGA and HDMI. In EPC-S201, the sys-
tem provides one VGA display of up to 2048 x 1280 @60Hz. In EPC-S201, the sys-
tem offers two 4K2K HDMI displays. The graphics engine is DirectX 11.3, OpenGL
4.4, and OpenCL 2.1 Full AVC/ VC1/MPEG2 HW Decode.
Built in Intelligent Management Tools - WISE-PaSS/RMM
Advantech WISE-PaSS/RMM provides a valuable suite of programmable APIs such
as multi-level watchdog, hardware monitor, system restore, and other user-friendly
interfaces. WISE-PaSS/RMM makes the whole system more reliable and more intel-
ligent. EPC-S201 provides easy remote management so users can monitor, config-
ure, and control a large number of terminals to make maintenance and system
recovery simpler.
1.2 Product Features
1.2.1 General
CPU:
–Intel® Celeron® N3350 DC SoC 1.1GHz boost up to 2.4 GHz
BIOS: AMI UEFI 64Mbit
System Memory: 1x DDR3L 1866MHz up to 8 GB (Memory is option, default
not included)
Watchdog Timer: Single chip Watchdog 255-level interval timer, setup by soft-
ware
Serial Port: 2 x RS-232/422/485
USB: 2 x USB 3.0
Audio: High Definition Audio (HD), Line out, Line-in
Storage: mSATA through 1 x half size MiniPCIe socket (storage is optional)
(default not included)
Expansion Interface: Supports 1 x Full Size MiniPCIe socket (expansion func-
tion is option) (default not included)

3 EPC-S201 User Manual
Chapter 1 General Introduction
1.2.2 Display
Controller: Intel®HD Graphics 500
Resolution: VGA, support up to 2048 x 1280 @ 60Hz
1.2.3 Ethernet
Chipset: LAN1 Intel i210
Speed: 1000 Mbps
Interface: 1 x RJ45
Standard: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3y,
IEEE 802.ab.
1.3 Chipset
1.3.1 Functional Specification
1.3.1.1 Processor
1.3.1.2 Chipset
1.3.1.3 Others
Processor Intel® Celeron® N3350 DC SoC 1.1GHz boost up to 2.4 GHz
Memory Supports DDR3L 1866MHz up to 8GB (optional)
1 x 204-pin SODIMM socket type
Serial ports EPC-S201C support 4x RS-232/422/485
support auto-flow control.COM connector: D-SUB CON. 9P
Internal Graph-
ics Features
DirectX 11.3, OpenGL 4.4
VGA, HDMI
Video Accelera-
tor
H/W accelerated video decode
Video decoder: AVC/VC1/MPEG2 HW Decode
USB Interface
USB host interface with support up to 4 USB 3.0 ports
All ports are High-Speed, Full-Speed, and Low-Speed capable
Supports legacy keyboard/mouse software
BIOS UEFI 64Mbit
Ethernet
LAN Intel i210
Supports 10/100/1000 Mbps.
LAN Connectors: Phone Jack RJ45 8P 90D(F)
Audio
Audio Codec: Realtek ALC888S:
Compliant with HD Audio specifications
Supports 16/20/24-bit DAC and 16/20/24-bit ADC resolution
Supports: Line-out, Line-in
Audio Connectors: Ear Phone Jack * 2
Battery backup BATTERY 3V/210 mAh with WIRE x 1

EPC-S201 User Manual 4
1.3.2 WISE-PaSS/RMM
1.4 Mechanical Specifications
1.4.1 EPC-S201 Dimensions
139 x 100 x 44 Unit: mm [Inch]
Figure 1.1 EPC-S201 Mechanical Dimension Drawing
1.4.2 Weight
0.6kg
1.5 Power Requirement
1.5.1 System Power
Minimum power input: DC 12V, 5A
1.5.2 RTC Battery
Lithium 3 V/210 mAH
Sequence control Supported
Watchdog timer Multi Level WDT
Programmable 1-255 sec / min
Hardware monitor CPU Temperature / input Current / input Voltage
Power saving Deep sleep S5 mode
System information Running HR / Boot record
Unit : mm
Dimensions
100
139
43.901

5 EPC-S201 User Manual
Chapter 1 General Introduction
1.6 Environment Specification
1.6.1 Operating Temperature
0 ~ 50° C, with air flow, speed=0.7 m/sec
1.6.2 Relative Humidity
95% @ 40° C (non-condensing)
1.6.3 Storage Temperature
-40 ~ 85° C (-40 ~ 185° F)
1.6.4 Vibration during Operation
Desk/Wall Mount/ DIN Rail: 3 Grms, IEC 60068-2-64, random vibration, 5 ~ 500
Hz, 1 hr/axis
1.6.5 Shock during Operation
30G, IEC60068-2-27, half sine, 11m duration
1.6.6 Safety
UL, CB, CCC, BSMI
1.6.7 EMC
CE, FCC, CCC, BSMI, VCCI

EPC-S201 User Manual 6