Advantech FWA-1010VC User manual

FWA-1010VC Network system with Intel®
Atom® C2000 Processor Platform
Packing List
Specifications
Before you begin installing your card, please make
sure that the following items have been shipped:
• One FWA-1010VC System
• One space of accessories
• One warranty certificate
If any of these items are missing or damaged, please
contact your distributor or sales representative
immediately.
Note 1: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
Main Board Functions
• CPU:
Dual Intel® C2000, L2 Catch: 2MB/4MB (by CPU SKU)
• Memory:
Supports two DDR3/DDR3L Memory DIMMs
up to 1600 MHz, depending on CPU SKU
• Storage:
Up to 1 x 2.5" SSD bracket(by product sku),
1x M.2 2280 SSD slot
• Dimensions:
250 x 44 x 190.4mm (W x H x D)
• Power Supply:
60W, 100 V ~ 240 V @ 50 ~ 60 Hz, full range
For more information on this and other
Advantech products, please visit our website at:
http://www.advantech.com.tw/support
http://www.advantech.com
For technical support and service, please visit
our support website at:
http://www.advantech.com/support
This manual is for the CGS6000 series Rev. A
Part No. TBA
Print in China
Draft Edition,

1. HARDWARE INSTALLATION INTRODUCTION
1.1 MEMORY INSTALLATION
1.1.1 Open the top cover and insert DDR3 UDIMM module into the socket,
insert RAM module into black socket first then insert RAM module in orange
socket

1.2 2.5”SSD BRACKET INSTALLATION=>
1.2.1 Get 4 pcs M3*4.0L screws & SSD bracket from accessory box
M3*4.0L screw

1.2.2 Use screwdriver locking 4 screws to fix 2.5”SSD in SSD bracket.
1.2.3 Get 4 pcs M3*4L screws from accessory box
M3*4 screw

1.2.4 Use screwdriver locking 4 screws to fix SSD bracket on FWA-1010VC,
SSD SATA & power connector side needs face from chassis side.
1.2.5 Please connect SATA & Power cable to SSD connectors.

1.3 M.2 SSD INSTALLATION
1.3.1 Get M.2 module & Screw M3*3.5 (P/N: 1930006888-01)
1.3.2 Use screwdriver locking a screw to fix M.2 module and FWA-1010VC
M/B.

1.4 WallMount Kit Installation
Get 6 pcsM3*4L screws from accessory box
Use screwdriver locking 6 screws to fix WallMount Kit bracket on FWA-1010VC
1.5 RackMount Kit Installation
Get 6 pcs M3*4L screws from accessory box
Plug in Power Adaptor into power Adaptor bracket
Revert power adaptor bracket into rack-mounting bracket
Please use screwdriver locking 6 screws to fix RackMount Kit bracket on FWA-1010VC

2. BIOS CONSOLE REDIRECTION SETTING
2.1 CONSOLE REDIRECTION FUNCTION INSTALL &SETTING
2.1.1 FWA-1010VC doesn’t have a VGA function; user needs to use
console-redirection cable(please contact your Advantech contact window to
order this cable) to control FWA-1010VC function,
2.1.2 Please use RJ45 to console cable to connect FWA-1010VC’s Console
port and Test PC’s RS232 COM port, user may press “DEL”or “ESC”key into
BIOS by console-redirection utility

2.1.3 Choose “Advanced”“Serial Port Console Redirection”item.
2.1.4 Default console redirection setting of FWA-1010VC BIOS is COM1

2.1.5 Baud rate setting is 115200,8,n1, and “Redirection after BIOS POST”is
Always.

3. FWA-1010VC QUICK START IMAGE INSTALLATION AND
SETTING
Advantech provided FWA-1010VC Quick Start Linux image which is based on
Ubuntu Linux distribution and is configured to run on FWA-1010VC for vE-CPE
and SD-WAN applications. Useful software utilities and tools which are either
Advantech proprietary or are under opens source license are integrated into
the image to provide customers with a quick and easy approach for platform
evaluation.
Please contact your Advantech representative for getting FWA-1010VC Quick
Start Linux image and Getting Started Guide.

4. FWA-1010VC BIOS FLASH STEP
4.1 FWA--1010VC BIOS flash step.
FWA-1010VC BIOS V016 or latest version are support flash BIOS by UEFI
shell, when user needs flash er below step to flash FWA-1010VC BIOS.
4.1.1 Please copy BIOS & flash tool (ex: fpt.efi) in USB flash, and insert USB
flash to FWA-1010VC.
4.1.2 Kindly power up system, and choose “Save & Exit”“Boot Overider”
“UFEI: Bulit-in EFI Shell”

4.1.3 Please press “ESC”to skip startup.nsh, it will show “Shell >”message
4.1.4 When system only install a USB flash, EFI shell will detect USB flash as
“fs0”, if system install 2 USB flash , EFI shell will detect USB flash as “fs0”and
“fs1”.
4.1.5 Kindly key-in “USB ID”whether BIOS file is located. (Example: the
system only install a USB flash, it needs key-in “fs0”into USB flash)
4.1.6 Kindly key-in sub-directories whether BIOS file is located. (Example: the
BIOS file put in /FWA1010VC/BIOS)

4.1.7 Kindly key-in “fpt.efi 0f “BIOS file”to flash FWA-1010VC BIOS, and
please don’t power off system during the flash BIOS.
4.1.8 When BIOS flash finish. Please power off and re-power on system, the
system BIOS will flash to new version.

5. SYSTEM PLATFORM SKUS
FWA-1010VC-4CA2S:
Tabletop
1x 60W Power Adaptor, CPU 4Core C2558 1x M.2 2280 SSD
slot, 7x 1GbE Ethernet port, 2x 1GbE SFP port and 4x 1GbE
switched Ethernet port with 1GbE uplink to CPU
FWA-1010VC-8CA2S:
Tabletop
1x 60W Power Adaptor, CPU 8Core C2758, 1x 2.5”SSD
bracket, 1x M.2 2280 SSD slot, 7x 1GbE Ethernet port, 2x
1GbE SFP port and 4x 1GbE switched Ethernet port with 1GbE
uplink to CPU

5.1 System Architecture
FWA-1010VC System Architecture

5.1.1 Front Side
FWA-1010VC System Front View
5.1.2 Rear Side
FWA-1010VC System Rear View

5.2 System Block Diagram
FWA-1010VC System Block Diagram

6. NAMB-1010VCMB JUMPER SETTING AND CONNECTOR
LIST
6.1 Connector
NAMB-1010VCMB Top side Connector Placement