Advantech EKI-3525 Installation and operation manual

1 Startup Manual
STARTUP MANUAL
EKI-3525/3528
Industrial Unmanaged Fast Ethernet Switch
The EKI-3525/3528 are a new generation products
with green Ethernet design. They feature green solu-
tions that automatically adjust power consumption by
detecting the link status and cable length. Designed
with 1/2 “VIP” ports to get optimal bandwidth for
media traffics through VIP ports users can experience
better performance of multimedia streaming
preferred through prioritized bandwidth setting. The
devices come with compact metal and plastic
housing that is IP40 rated to protect against dusty
industrial environments. The wide power input power
(8.4 to 52.4 VDC) is dedicated to operate in areas of
unstable power and rugged environments. It also
provides an event alarm and in the event of a power
failure and connection loop, the integrated LED will
activate the alarm to notify administrators.
Before installation, please make sure that you have
received the following:
• 1 x EKI-3525 or EKI-3528 Industrial Unmanaged
Fast Ethernet Switch
• 1 x Wall Mounting Bracket
• 1 x DIN-rail Mounting Bracket and Screws
• 1 x EKI-3525/3528 Startup Manual
If anything is missing or damaged, contact your
distributor or sales representative immediately.
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
General
• Compatibility:IEEE 802.3, 802.3u, 802.3x,
802.3az
• LAN: 10/100Base-TX
• Ethernet RJ-45: Up to 100 m
• Connectors:
EKI-3525: 5 x 10/100Base-TX RJ-45 ports
EKI-3528: 8 x 10/100Base-TX RJ-45 ports
6-pin removable screw terminal (Power &
Relay)
• Switch Architecture:Store and Forward
• Power Requirement: 12~48VDC, Redundant
Power Input with reverse polarity protection.
• Power Consumption:
EKI-3525: 1.5 Watts
EKI-3528: 3 Watts
• Dimensions (W x H x D): 27x120x85 mm
• Enclosure:IP40
• Operating Temperature: -10 ~ 60°C
(14°F~140°F)
• Storage Temperature: -40 ~ 85°C (-40°F~185°F)
• Operating/Storage Humidity: 5%~95%
(noncondensing)
• Safety: UL60950
• EMC: FCC Class A, CE
• Warranty: 5 years
Overview Specifications
Packing List
User Manual
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-3525/3528
Part No. xxxxxxxxxxxx 1st Edition
January 2013

2 Startup Manual
EKI-3525
EKI-3528
The EKI-3525/3528 series switch supports dual
+12~48VDC power inputs
1. Insert the positive and negative wires into the V+
and V- contacts on the terminal block.
2. Tighten wire-clamps to prevent the DC wires from
loosing.
Warning:This is a Class A product. In domestic envi-
ronment thisproduct may cause radio interference in
which case the user may be required to take adequate
measures.
DIN-rail Mounting
Wall Mounting
Overview
Power Connection
DC12~48V
Mounting
1. Hang the device to
the DIN-rail.
2.Hook the device over
the DIN rail and let it
drop down straight to
slide over the rail
smoothly.
1. Attach the brackets
included to the switch
with screws.
2.With the brackets
attached, hang the switch to
nails on the wall.