Advantech EKI2726FHPI Series Installation and operation manual

STARTUP MANUAL
1 Startup Manual
EKI-2726FHPI Series
Industrial Unmanaged Gigabit PoE+ Ethernet Switch
Packing List
Before you begin installing your switch, please make
sure that the following material have been shipped:
• 1 x EKI-2726FHPI Series Industrial Unmanaged
Gigabit Ethernet Switch
• 1 x eAutomation Industrial Communication CD-ROM
and User manual
• 2 x Panel Mounting Bracket and Screws
• 1 x DIN-rail Mounting Bracket and Screws
• 1 x EKI-2726FHPI Startup Manual
• 1 x DC Jack Cable φ2.0/150mm
If any of these items are missing/damaged, contact your
distributor or sales representative immediately.
Note 1: For detailed information about the EKI-
2726FHPISeries, please refer to the manual on the
enclosed CD (in PDF format).
Note 2: Acrobat Reader is required to view any
PDF file Acrobat Reader can be downloaded at:
http://www.adobe.com/products/acrobat/readstep2.html
(Acrobat is a trademark of Adobe.)
Overview
EKI-2726FHPI Series is a cost-effective solution and
meets the high reliability requirements demanded by
industrial applications. Using ber port can extend the
connection distance that increases the network elasticity
and performance.
The equipment also meets the IEEE 802.3 at standard
and can provide 30Watts output per PoE port.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com.tw/eservice
This manual is for EKI-2726FHPI Series.
Part No: xxxxxxxxx 2nd Edition
July 2012
iUser Manualcation
The user manual can be found on the attached CD-ROM.
iSpecificationscation
• Compatibility: IEEE802.3, IEEE802.3u, IEEE802.3ab
IEEE802.3z, IEEE802.3x, IEEE802.3at, IEEE802.3af
• LAN: Copper:10/100/1000Base-T, Fiber: 1000Base-
SX/LX/LHX/XD/ZX/EZX
• Ethernet RJ-45: Up to 100 m
• SFP: Up to 110 km (depends on SFP)
• Connectors:
EKI-2726FHPI: 4 x 10/100/1000 Base-TX RJ-45 and
2 x 1000Base-SFP
6-pin removable screw terminal (Power & Relay)
• Switch Architecture: Store and Forward
• Power Requirements: 48VDC(44Vdc to 57Vdc),
Redundant Power Input
• Power Consumption:
EKI-2726FHPI: 5.5 Watts(Max.)@ 48VDC,
(Ethernet only)
• Dimensions (W x H x D): 59.6 x 152 x 105mm
• Enclosure: IP30
• Operating Temperature: -40 ~ 75°C (-40°F~167°F)
• Storage Temperature: -40 ~ 85°C (-40°F~185°F)
• Operating/Storage Humidity: 5%~95% (noncondensing)
• Safety: UL508
• Hazardous Location: UL/cUL Class I, Division 2,
Groups A, B, C and D
• EMC: FCC Class A, CE
• Warranty: 5 years
All manuals and user guides at all-guides.com
all-guides.com

STARTUP MANUAL
Startup Manual 2
Overview
EKI-2726FHPI
Power Connection
The EKI-2726FHPI series switch supports dual
+44~57VDC power inputs
1. Insert the positive and negative wires into the V+ and
V- contacts on the terminal block.
2. Tighten wire-clamps to prevent the DC wires from
loosing.
Warning
This is a Class A product. In domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Mounting
DIN-Rail Mounting
1.Hang the device to the DIN
rail with angle of inclination.
2. Hook the devi ce o ver t he D IN r a il
and let it drop down straight to
slide over the rail smoothly.
Wall Mounting
1. Attach the brackets included
to the switch with screws.
2. With the brackets attached,
hang the switch to nails on
the wall.
DC44~57V
EKI-2726FHPI
10/100/1000TX
PWR1
P6
P5
P5
P4
P3
P2
P1
P1
P2
P3
P4
PoE
P6
PWR2
P-Fail
All manuals and user guides at all-guides.com