AEG BOF18B2 User manual

BOF18B2
Original instructions

2
2
Important!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.

33
1
2
3
4
5
6
10
14
15
9
8
7
11
12
13
1. Battery port
2. Micro depth adjustment knob
3. Quick release lever
4. Spindle lock
5. Collet nut
6. Square subbase
7. Speed selector
8. On/off switch
9. Motor housing
10. Removable base
11. Straight bit(6.35 mm)
12. Wrench
13. Edge guide
14. Dust pipe joint
15. Round sub base

4
4
4 5
18
6
10
13
8
15
16
14
12
START
STOP
9

55
4 5
18
6
10
13
8
15
16
14
12
START
STOP
9

6
6
6 7
click
1
1
2
2
75-100 %
50-75 %
25-50 %
0-25 %
R emove the battery pack
before starting any work
on the machine.

77
6 7
click
1
1
2
2
75-100 %
50-75 %
25-50 %
0-25 %
R emove the battery pack
before starting any work
on the machine.

8
8
8 9
1
1
2
2
3
3
ø 6 mm (EU)
ø 6.35 mm
(1/4”)
Aø 6.35 mm
(1/4”)
B
A = B

99
8 9
1
1
2
2
3
3
ø 6 mm (EU)
ø 6.35 mm
(1/4”)
Aø 6.35 mm
(1/4”)
B
A = B

10
10
10 11
1
4
2
5
3

11 11
10 11
1
4
2
5
3

12
12
12 13
START
STOP
START
STOP

13 13
12 13
START
STOP
START
STOP

14
14
14 15
1
2
3
soft wood hard wood plastics aluminium

15 15
14 15
1
2
3
soft wood hard wood plastics aluminium

16
16
10 11
1
2
3
2
2
1
1
2
1
4
5
ø 30 mm

17 17
10 11
1
2
3
2
2
1
1
2
1
4
5
ø 30 mm

18
18
16 17
Only work oppositely oriented!

19 19
16 17
Only work oppositely oriented!

18
18
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
BL18DPS
Use AEG 18V battery and charger only
WARNING!
WARNING! Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/
or serious injury. Save all warnings and instructions for future
reference.
TRIM ROUTER SAFETY WARNINGS
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the work by your hand or
against the body leaves it unstable and may lead to loss of control.
Use only rotary cutting bits of the correct shank diameter for the
collet mounted.
Use only rotary cutting bits suitable for the speed of the product.
Use the dust collection device or connect a dust extraction vacuum
when operating the product. (applicable to tool with dust port.)
Ambient temperature range for tool during operation is between 0°C
and 40°C.
Ambient temperature range for tool storage is between 0°C and 40°C.
The recommended ambient temperature range for the charging
system during charging is between 10°C and 38°C.
ADDITIONAL SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden
wiring. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an
electric shock.
Always use bits of the correct shank diameter that are suitable
for the speed of the product.
Know your power tool. Read operator’s manual carefully. Learn
its applications and limitations, as well as the specific potential
hazards related to this power tool. Following this rule will reduce
the risk of electric shock, fire, or serious injury.
Always wear safety glasses with side shields. Everyday glasses
have only impact resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury.
Protect your lungs. Wear a face or dust mask if the operation
is dusty. Following this rule will reduce the risk of serious personal
TECHNICAL DATA TRIM ROUTER BOF18B2
Rated voltage 18 V
No-load speed 17000 - 30000 min-1
Collect diameter 6.35 mm(1/4”)
Maximum base adjustment 38 mm(1½”)
Maximum depth of cut 3 mm(1/8”)
Weight - not including battery pack 1.1 kg
Measured values determined according to EN 60745:
A-weighted sound pressure level L
p
= 76.0 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level LW= 87.0 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value ah= 1.5 m/s2
Uncertainty K 1.5 m/s2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for dierent applications, with dierent accessories or poorly maintained,
the vibration emission may dier. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.