AEI COMMUNICATIONS SVM-2208-S User manual

VoIP Phone
SVM-2208-S / SVM-2108-S
SVM-7208-S / SVM-7108-S
SVM-9208-S / SVM-9108-S
QIG v1.1

1 Over view
This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to
operate this product and take advantage of its features.
Package Contents
When unpacking the phone ensure all the following items are present and undamaged. If anything appears to be
missing or broken contact your dealer for a replacement.
1. ase Unit
2. Handset
3. Stand
4. AC Adaptor
5. RJ-45 Cable
6. Quick Installation Guide (This document)
2 Product Description
The following contains important information to help you familiarize with the functions of the VoIP phone.
Front View
1. Base unit keys
Name Description
1 Display screen To display calls and status information.
2 Programmable Press to call preset service

Name Description
Services keys
3 Alphanumerical keys Press these keys to enter phone numbers and texts.
4 Function keys
LINE 1 / LINE 2 To indicate a line been used as the following status:
- Idle: No LED indication.
- Call on hold: Red LED ash
- In call: Red LED.
HOLD (2 lines only) Press to put an active call on hold.
MUTE (single line Press to mute MIC.
only)
REDIAL Press to call the last dialed number.
SPEAKER Press to activate the speakerphone for hands free
conversations.
VOLUME UP/DOWN Press to increase or decrease the volume of the ringer
tone or speakerphone.
MESSAGE Press to retrieve voice messages.
ack View
NO. Name Description
1 LAN port Connects to HUB ADSL or Switch(PSE)
2 PC port Connects to computer
3 DC 5V Power jack Connects to AC power adapter. (Optional. While base
unit is not powered via a PSE)
4 Handset jack Connects to handset.

Connecting the Phone
The following illustration shows how to connect the power LAN and PC ports of VoIP phone.
HU
Power outlet

The following illustration shows how to install the phone and stand.
3Operation
Answering a Call
An incoming call is indicated by a ringing tone and a ashing indicator at the top of units. You can answer the call by
doing one of the followings:
Pick up the Handset to answer the call.
Press the LINE (LINE1/LINE2) key on the base or handset to answer the call.
Making a Call
Dialing with the Keypad
Enter the telephone number with the alphanumerical keypad.
After entering the number you want to call press the # key to force dialing or wait for 4 seconds before the
number is dialed automatically.
Using the Programmable Services keys
You can use the pre-assigned service hotkeys to congure the most commonly dialed numbers. Use the function to
dial a number quickly instead of keying in a complete number.
To call a number using services hotkeys follow the steps below:
Press the service hotkeys that has been pre-assigned to the phone number and the call will start automatically.

Call Options
While a call is in progress a number of additional options are available.
Using the Speaker Phone
For hands free operation you can use the built‐in speaker to talk on the phone. To use the speakerphone follow the
steps below:
While talking on the phone press the SPEAKER key on the phone to enable the Speakerphone function.
Press SPEAKER key again to terminate the call.
Putting a Call on Hold
You may want to put a call on hold temporarily while doing some work or attending to a second incoming or
outgoing call. To put a call on hold do one of the following:
Press the HOLD key on the phone to put the call on hold.
When you receive a second call press the next available LINE key to attend to the new call and the rst call will
be put on hold automatically.
Checking Voice Messages
If the MESSAGE key in red it indicates that there are one or more new messages in voicemail box.
Press the MESSAGE key on the phone to retrieve voice messages.
(An external ITSP or PBX must support voice message feature. And you need to set a voice message code before
using the voice mail feature.)
4Support
To congure through the web browser do the following:
Ensure the phone is powered up and connected to a DCHP network.
Press HOLD/MUTE *112*113# (HOLD for 2-Line / MUTE for 1-Line) the IP address is displayed on the
LCD screen.
Open your browser (such as Chrome Firefox etc.) and type in the web address of the phone. For example
http:// IP.address.of.thePhone:8000
When the Web login front page is displayed. Enter the user name and the password and click Login.
The administrator’s user name and password are “admin” and “1234” respectively.
For technical support, please email to suppor[email protected]
Model:
VM-2208-S(S) / VM-2108-
S(S)
VM-7208-S(S) / VM-7108-
S(S)

VM-9208-S(S) / VM-9108-S(S)