AERMEC WLRC40 User manual

■
REMOTE HANDSET
www.aermec.com
Translation from original
User manual
EN
20.01 - 5299731_00
WLRC40

All specifications are subject to change without prior notice. Although every effort has been made to
ensure accuracy, Aermec shall not be held liable for any errors or omissions.
Dear customer,
Thank you for choosing an AERMEC product. It is the fruit of many years of experience and special
design studies and has been made of the highest grade materials and with cutting edge technology.
In addition, all our products bear the EC mark indicating that they meet the requirements of the
European Machine Directive regarding safety. The quality level is being constantly monitored, so
AERMEC products are synonymous with Safety, Quality and Reliability.
The data may undergo modifications considered necessary for the improvement of the
product, at any time and without the obligation for any notice thereof.
Thank you once again.
AERMEC S.p.A
This marking indicates that this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled disposal
of Waste Electrical and Electronic Equipment (WEEE), please return the device using
appropriate collection systems, or contact the retailer where the product was purchased.
Please contact your local authority for further details.
Illegal dumping of the product by the user entails the application of administrative
sanctions provided by law
INFORMATION FOR USER
This device is universal.
By pressing a key for a function that is not available, the unit will not change the operating status.
Never install the device in a damp area and do not expose it to direct sunlight.
Do not bump, throw or disassemble the device frequently.
Never use the device with wet hands.
Carefully read the manual before using and installing the device.

REMOTE CONTROL................................................................................................................................................................................................................................... 4
FUNCTIONS AVAILABLE THROUGH THE REMOTE CONTROL.................................................................................................................................................. 6
SWITCHING THE UNIT ON OR OFF..................................................................................................................................................................................................... 6
SETTING THE OPERATING SETPOINT.............................................................................................................................................................................................. 6
SELECTING AN OPERATING MODE.................................................................................................................................................................................................... 7
SETTING THE VENTILATION SPEED ................................................................................................................................................................................................... 8
SETTING THE MOTORISED DELIVERY FIN VERTICAL SWING................................................................................................................................................ 9
SETTING THE MOTORISED DELIVERY FIN HORIZONTAL SWING ........................................................................................................................................ 9
SETTING OR CANCELLING A PROGRAMMED SWITCH ON TIMER ON............................................................................................................................10
SETTING OR CANCELLING A PROGRAMMED SWITCH OFF TIMER OFF.........................................................................................................................10
SETTING A SYSTEM TIME.....................................................................................................................................................................................................................11
ACTIVATING / DEACTIVATING THE I FEEL FUNCTION ..............................................................................................................................................................11
AIR PURIFIER BUTTON COLD PLASMA...........................................................................................................................................................................................12
DISPLAYING THE ROOM TEMPERATURE OR THE OPERATING SETPOINT OR OUTDOOR TEMPERATURE ON THE INDOOR UNIT
DISPLAY 12
ACTIVATING / DEACTIVATING THE EXTENDED VENTILATION XFAN .............................................................................................................................13
ACTIVATING / DEACTIVATING THE INDOOR UNIT’S DISPLAY...............................................................................................................................................13
ACTIVATING / DEACTIVATING THE NIGHTTIME COMFORT FUNCTION...........................................................................................................................14
ACTIVATING OR DEACTIVATING THE WIFI FUNCTION ONLY WITH WIFI DEVICE INSTALLED ...............................................................................15
SETTING OR REMOVING THE BUTTON LOCK ..............................................................................................................................................................................16
ACTIVATING OR DEACTIVATING THE ENERGY SAVING FUNCTION....................................................................................................................................16
ACTIVATING / DEACTIVATING THE ANTIFREEZE FUNCTIONS ..............................................................................................................................................17
SETTING THE UNIT OF MEASUREMENT.........................................................................................................................................................................................18
REPLACING THE REMOTE CONTROL’S BATTERIES.....................................................................................................................................................................19
CONTENTS
COMPANY CERTIFICATIONS
SAFETY CERTIFICATIONS

ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
1
2
79
11
8
10
14
17
12
15
13
16
19
18
3 4
5 6
4
REMOTE CONTROL
• Some of the buttons of the remote control are not used
for this air conditioner, and are therefore not described in
these instructions. The pressing of these buttons will not
affect the operation of the air conditioner.
• Check there are no obstructions between the receiver and
the remote control.
• The maximum distance between the IR receiver and the
remote control for ensuring a good signal is 8 metres.
• Position the remote control at least 1 metre away from TVs,
radios, stereos, etc.;there may be some audio and video
interference.
• Do not drop or throw the remote control.
• Do not let liquids enter the remote control, and do not
leave it in direct sunlight or in hot places.
• When the remote control sends a signal, the symbol
ON/OFF
TURBO
CLOCK T-ON/T-OFF
TEMP
SLEEP
I FEEL SWING
FAN MODE
LIGHT WIFI
QUIET
WIFI
appears on the display and the indoor unit receiver emits a
sound to confirm reception of the signal.
Index Function of the button:
1
Switches the unit on or off
2
Increases or decreases the value of the active function:
• Temperature
• Time
• ON timer
• OFF timer
3
Activates or deactivates cooling mode
4
Activates or deactivates heating mode
5
Sets the ventilation speed
6
Activates or deactivates the iFEEL function
7
Sets the operation of the motorised air delivery fin
(vertical swing)
8
Selects the operating mode
9
Sets the operation of the motorised air delivery fin
(horizontal swing)
10
Activates (T-ON) or deactivates (T-OFF) timer mode
11
Sets the time on the system clock
12
Activates the HEALTH or AIR function
13
Activates the prolonged ventilation function
14
The indoor unit display shows the temperature set-point
and the room or outside air temperature
15
Activates or deactivates the visualisation of information
on the indoor unit display
16
Activates or deactivates the SLEEP function (this function
is applicable to cooling and heating mode); once
activated, this function will control the unit in order to
maintain an ideal temperature (which is automatically
calculated and cannot be set)
17
Activates or deactivates the WIFI card
18
Liquid crystal display
19
IR transmitter
SYNCHRONISING THE REMOTE CONTROLWITH
THE INDOOR UNIT:
When the unit is in standby, stand no more than
2m away then press and hold the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
button for
3 seconds. The remote control and the unit will
be automatically synchronised. If the operation
is successful, the unit will emit 3 beeps; if it fails,
there will be no beep and you must repeat the
operation.
Frequency band(s) that the radio equipment
works in: 2400 MHz-2483.5 MHz
Maximum radiofrequency power transmitted in
the frequency bands that the radio equipment
works in: 13 dBm

ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
5
Icons available on the remote control display
Index Function represented by the icon:
Indicates that AUTOMATIC mode is active
Indicates that COOLING mode is active
Indicates that DEHUMIDIFICATION mode is
active
Indicates that VENTILATION mode is active
Indicates that HEATING mode is active
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that the SLEEP function is active
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
FUNCTION NOT AVAILABLE
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
FUNCTION NOT AVAILABLE
Indicates the status of the vertical SWING
function
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates the status of the horizontal SWING
function
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that all the display buttons are locked
Indicates that the iFEEL function is active
Indicates the current ventilation speed
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that the TURBO function is active (the
fan speed is forced by this function)
Indicates that the setting has been transmitted
to the receiver on the indoor unit
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that the antifreeze function is active
(min. temperature 8°C)
Indicates that the air purifier function (Cold
Plasma) is active
FUNCTION NOT AVAILABLE
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that AUTO mode is active
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that QUIET OPERATION mode is active
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates that the prolonged ventilation function
is active (only in cooling or dehumidification
mode)
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates which temperature is shown on the
indoor unit display (indoor temperature, outdoor
temperature or set-point temperature)
Indicates that the figures shown next to the icon
represent the current system time
Indicates the system time, or the ON and OFF
timers
Indicates if an ON timer has been set
Indicates if an OFF timer has been set
/ Indicates the unit of measurement for the
temperature set-points (°F or °C)
WIFI
Indicates that the WIFI function is active
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
Indicates the battery charge level

6
FUNCTIONS AVAILABLE VIA THE REMOTE
CONTROL
SWITCHING THE UNIT ON AND OFF
By pressing the
ON/OFF
button it is possible to
switch the unit on or off. When off, some information
is still displayed on the remote control: the operating
set-point of the last operating mode used, and switch
on timers programmed (ON) and any icons tied to the
function active during the last switch on of the unit
(enabling the display of the indoor unit, etc.) Once
switched on the unit uses the settings selected during
the last operating session.
Switching on
DEFINING THE OPERATING SETPOINT
All the operating modes (except automatic) require a
target ambient air temperature value; this is called the
operating set-point.
If the unit is on (and automatic mode is not selected),
press the or button to decrease or increase the
working set-point. The set-point value is displayed in
the central part of the remote control display.
Operating set-point
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
INTELLIGENT
HOUR ONOFF
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

7
SELECTING AN OPERATING MODE
If the unit is on, press the
MODE
button to pass from
one operating mode to the next, in the sequence
shown below. COOL, HEAT and FAN modes can also be
selected via the dedicated buttons (refer to the REMOTE
CONTROL paragraph).
AUTO mode
COOL mode
DRY mode
FAN mode
HEAT mode
MODEON/OFF
FAN
CLOCK
X-FAN
TURBO SLEEP LIGHT
TEMP TIMER OFF
TIMER ON
The various operating modes have different features
and ranges:
• AUTOMATIC mode (AUTO): in this mode, the
remote control does not display any set-point value
and the fan speed is set to AUTO.
• COOLING mode (COOL): in this mode the user
must set the operating set-point and a fan speed;
if the room temperature is higher than the set
value (which can be seen on the display), the air
conditioner will continue to cool the air until the
room temperature reaches the set-point value.
• DEHUMIDIFICATION mode (DRY): in this mode the
user must set the operating set-point but not the fan
speed (which remains fixed at minimum); if the room
temperature is higher than the set value (which
can be seen on the display), the air conditioner
will continue to dehumidify the air until the room
temperature reaches the set-point value.
• VENTILATION mode (FAN): in this mode the user
must only set the fan speed. This mode provides no
heating or cooling, using only the internal fan to
ventilate the room.
• HEATING mode (HEAT): in this mode the user must
set the operating set-point and a fan speed; if the
room temperature is lower than the set value (which
can be seen on the display), the air conditioner will
continue to heat the air until the room temperature
reaches the set-point value.
Selecting the operating mode
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

8
Setting the ventilation
speed
SETTING THE VENTILATION SPEED
Press the
FAN
button to modify the fan speed.
In DRY mode (dehumidification), the fan will
automatically change to the minimum speed.
NB:
• The Turbo FUNCTION is not available in DRY
or AUTO mode.
• Automatically activates QUIET speed when
the suspension function starts up.
• The unit works at low speed in DRY and AUTO
mode (the speed cannot be adjusted).
• In AUTO mode, the air conditioner will
automatically select the appropriate speed on
the basis of the room temperature.
AUTOMATIC
Minimum speed
Minimum medium speed
Medium speed
Medium high speed
High speed
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

9
SETTING THE VERTICAL MOTORISED DELIVERY FIN
SWING
If the unit is on, press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button to activate the
swing function of the motorised delivery fin. This fin
varies the direction of the flow of air into the ambient,
on the basis of the selected position. With the unit on,
press the specified button to set the following steps,
one by one:
WARNING:
(*) there are different icons for continuous swing,
but all four of them activate the same mode:
continuous swing from the lowest to the highest
point.
SETTING THE HORIZONTAL MOTORISED DELIVERY
FIN SWING
If the unit is ON, press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button to activate the
swing function of the motorised delivery fin. This fin
varies the direction of the flow of air into the ambient,
on the basis of the selected position. With the unit ON,
press the specified button to set the following steps,
one by one:
Setting the motorised delivery
fin
Setting the motorised
delivery fin
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
, , =
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
Continuous
swing
Fixed
(Step 1)
Fixed
(Step 2)
Fixed
(Step 3)
Fixed
(Step 4)
Fixed
(Step 7)
Fixed
(Step 6)
Fixed
(Step 5)
Continuous
swing (*)
Fixed
(Step 1)
Fixed
(Step 2)
Fixed
(Step 3)
Fixed
(Step 4)
Fixed
(Step 5)
Continuous
swing (*)
Continuous
swing (*)
Continuous
swing (*)

10
Setting a programmed
switch-on
SETTING OR CANCELLING A PROGRAMMED SWITCH
ON TIMER ON
The units have a timer for programming switch-on by
specifying the time that you want the unit to start.
Press
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
to access timer programming mode (in this
mode, the ”ON” icon to the right of the clock will flash),
then press the or button to set the ON time. Keep
the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
button pressed for about 2 seconds. The time
will scroll quickly on the display until the required time
is reached.
Press
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
on the left-hand side again to confirm the
time and activate the timer program. If you want to
cancel a programmed switch-on, just press the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
button (on the left) again to delete the programming.
NB:
once a programmed switch-on has been set,
the operating mode, working set-point and
fan speed will be the same as at the last unit
switch-off.
SETTING OR CANCELLING A PROGRAMMED SWITCH
OFF TIMER OFF
The units have a timer for programming switch-off by
specifying the time that you want the unit to stop. Press
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
to access timer programming mode (in this mode,
the ”OFF”icon to the right of the clock will flash), then
press the or button to set the OFF time. Keep the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
button pressed for about 2 seconds. The time will
scroll quickly on the display until the required time is
reached.
Press
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
on the right-hand side again to confirm the
time and activate the timer program. If you want to
cancel a programmed switch-off, just press the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
button (on the right) again to delete the programming. Setting a programmed
switch-off
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
OFF

11
Setting the system
time
SETTING A SYSTEM TIME
The remote control is fitted with an internal clock
that can display the current time; by pressing on the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key, the clock icon will start to flash (this flashing
will last 5 seconds, after this if no key is pressed you
automatically exit the time modification mode). While
the clock icon is flashing, you can change the system
time using the and buttons to decrease or
increase the displayed time. After setting the required
value, wait 5 seconds or press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key again to
confirm the value (once confirmed, the clock icon will
stop flashing).
ACTIVATING / DEACTIVATING THE IFEEL FUNCTION
If you hold the remote control close to yourself, you can
accurately control the surrounding temperature.
Press
I FEEL
to activate this function.
The symbol on the display indicates that the iFEEL
function is active. The remote control, by means of an
internal probe, detects the room temperature and
sends it to the indoor unit.
The remote control must always be within its
transmission range and facing towards the indoor unit
of the air conditioner. Do not put it in a drawer or cover
it.
The remote control will update the reading and send
the information to the air conditioner every 10 minutes
and each time the buttons are pressed to change the
settings.
NB:
this function uses the set-point defined by the
user, and ensures greater comfort if the remote
control is kept close to the user (within a maximum
of 8 metres).
When this function is active, you are advised to
keep the remote control away from heat sources
that could distort the real room temperature
reading.
Activating / deactivating the
iFEEL function
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

12
Setting the air purifier (Cold
Plasma) function
"COLD PLASMA" AIR PURIFIER BUTTON
Capable of reducing pollutants, breaking down
their molecules by means of electric discharges and
causing the splitting of the water molecules in the air
into positive and negative ions. These ions neutralise
the molecules of the gaseous pollutants obtaining
products that are normally present in clean air. The
device is able to eliminate 90% of the bacteria. The
result is clean, ionised air that has no bad odours.
Press the button several times to activate the
function, as indicated below:
Air purifier (Cold Plasma)
Function not available
DISPLAYING THE ROOM TEMPERATURE, OPERATING
SETPOINT OR OUTSIDE TEMPERATURE ON THE
INDOOR UNIT DISPLAY
The remote control can be used to view the room
temperature value read by the indoor unit, the
operating set-point currently being used by the unit, or
the outside temperature. This information is shown on
the indoor unit display.
If the unit is ON and the indoor unit display is enabled,
press
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
to see the following values on the indoor
unit display (moving from one to the next with each
pressing of the button):
NOTE:
the default info on the indoor unit display is the
operating set-point; the room temperature value
is shown for 3 seconds after which the display
returns to the operating set-point. To see the room
temperature again, select the corresponding
symbol on the remote control.
Requesting the visualisation
of the room temperature or
operating set-point on the
indoor unit display
cancel
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
No
visualisation
Set-point Room
air
Outside
air
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI

13
NB:
the X-FAN function will remain active even after the
unit has been switched off via the remote control.
The icon will remain visible on the display to
indicate that the function is active.
ACTIVATING / DEACTIVATING THE PROLONGED VEN
TILATION XFAN FUNCTION
During operation in cooling or dehumidification mode,
condensate forms on the indoor unit heat exchanger as
a result of the humidity in the air.
Once the air conditioner has been switched off, the
X-FAN function extends ventilation for a few minutes
after unit switch-off in order to dry the heat exchanger.
If the unit is ON (and cooling or dehumidification mode
is selected), press and hold the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan
Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
button to activate
or deactivate this function. On the remote control
display, the icon will appear or disappear to show
whether the function is activated or deactivated.
Setting the extended ventilation
function
ACTIVATING / DEACTIVATING THE INDOOR UNIT
DISPLAY
The display on the indoor unit must be activated using
the remote control. To activate the info on the front
panel of the indoor unit, press the
LIGHT
button on the
remote control.
Enabling the
info on the
indoor unit
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

14
Setting the night-time comfort
function
NB:
the night-time comfort function is deactivated by
switching off the unit; it will not be active when
the unit is restarted. It can be activated at any
moment during the day.
ACTIVATING / DEACTIVATING THE NIGHTTIME COM
FORT FUNCTION
The night-time comfort function controls the air
conditioner in an optimal way during the night. The
following logic is applied:
• In cooling or dehumidification mode: the
temperature set-point is gradually increased to
guarantee maximum comfort combined with energy
savings
• In heating mode: the temperature set-point is
gradually reduced to guarantee maximum comfort
combined with energy savings
If the unit is ON (and automatic or ventilation-only
mode is not selected), press
SLEEP
to activate or
deactivate the night-time comfort function. If this
function is active, the
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
icon will be displayed on the remote control.
Night-time comfort function SLEEP 1
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
It can only be selected in cooling mode and heating
mode.
• In cooling mode: the temperature increases by
1°C after one hour, and by 2°C after two hours of
operation.
• In heating mode: the temperature decreases by
1°C after one hour, and by 2°C after two hours of
operation.
Night-time comfort function SLEEP 2
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
It can only be selected in cooling mode and heating
mode.
SLEEP function 2 includes different operating programs
depending on the temperature set-point.
Night-time comfort function SLEEP 3
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
It can only be selected in cooling mode and heating
mode.
With SLEEP function 3 (DIY), the room temperature can
be programmed hour by hour, up to a maximum of 8
hours.
After selecting SLEEP 3 mode
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
, keep the TEMP
button pressed for several seconds; the temperature
on the remote control display will start flashing. At this
point you can program the required temperatures as
shown in the adjacent example table (to confirm the
temperature and move on to the next hour setting,
press the TEMP button again):
Night-time comfort function SLEEP 4
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
In SLEEP 4 mode (“SIESTA”), the set temperature will
change automatically on the basis of the characteristics
of the siesta.
set temperature 18°C
set temperature 19°C
set temperature 20°C
set temperature 21°C
set temperature 22°C
set temperature 23°C
set temperature 24°C
set temperature 25°C
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

15
ACTIVATING OR DEACTIVATING THE WIFI FUNCTION
ONLY WITH WIFI DEVICE INSTALLED
Press
WIFI
for 3 seconds to activate or deactivate the
WIFI device installed in the indoor unit.
The WIFI symbol on the display indicates that the
device is active.
To reset the WIFI device with the factory values, switch
off the unit and then simultaneously press
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
and
WIFI
for at least one second.
Activating or deactivating the
WIFI function
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

16
Locking the keypad
SETTING OR DISABLING THE BUTTON LOCK
Simultaneously press and to lock and unlock the
keypad.
This function prevents any accidental changes to the
settings.
The icon on the remote control display shows that
the remote control keypad is locked.
ACTIVATING OR DEACTIVATING THE ENERGY SAVING
FUNCTION
The ENERGY SAVING function makes it possible to reach
the set temperature with lower energy consumption.
In COOLING mode:
simultaneously press
TEMP
+
CLOCK
to set the ENERGY
SAVING function.
On the remote control display, the icon will appear
or disappear to indicate whether the function is
activated or deactivated.
Activating or deactivating
the energy
saving function
NB:
in ENERGY SAVING mode, the fan speed (set on
AUTO) and set temperature cannot be altered.
The SLEEP and ENERGY SAVING functions cannot
work at the same time.
If the ENERGY SAVING function has been set to
COOLING mode, press the SLEEP button to annul
the energy saving function. If the SLEEP function
has been set in HEATING mode, it will be annulled
by the ENERGY SAVING function.
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

17
Activating or deactivating the
antifreeze function
ACTIVATING / DEACTIVATING THE ANTIFREEZE
FUNCTION
The antifreeze function is only available in heating
mode. This function makes it possible to keep an
operation setpoint in heating mode equivalent to 8°C,
ensuring thus that the room temperature does not go
below this threshold.
If the unit is ON and heating mode is selected, press
TEMP
+
CLOCK
simultaneously to activate or deactivate the
antifreeze function.
On the remote control display, the icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
will appear
or disappear to indicate if the function is activated
or deactivated and the temperature will automatically
be set to .
NB:
In ANTIFREEZE mode, the temperature cannot be
altered.
The SLEEP and ANTIFREEZE functions cannot
work at the same time.
If the ANTIFREEZE function is set to HEAT mode,
annul it by pressing the SLEEP button. If the
SLEEP function has been set in HEATING mode, it
will be annulled by the ANTIFREEZE function.
NB:
if the temperature is shown in degrees Fahrenheit
°F, it will automatically be set to 46°F on the
remote control display, in ANTIFREEZE mode.
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

18
SETTING THE UNIT OF MEASUREMENT
The unit can display the temperature values in °C or
°F. To change the unit of measurement, switch off the
unit and then simultaneously press the and
MODE
buttons.
The temperature value on the remote control display is
automatically converted.
Setting the
unit of measurement
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON

19
NB:
• remove the batteries if the remote control is
not used for a long time.
• The remote control can emit a signal up to a
maximum distance of 8 metres.
• The unit can be affected by signals
transmitted by the remote control units of
televisions, video recorders, or other devices
used in the same room.
WARNING:
• the battery charge level is shown on the
remote control. When the “
ON/OFF
Light
I FeelFan
HeatCool
Sleep Wifi
X-Fan Temp
T-ON
Clock
Mode
T-OFF
INTELLIGENT
HOUR ON OFF
WIFI
” icon flashes,
replace the batteries as otherwise the remote
control cannot work properly.
REPLACING THE REMOTE CONTROL BATTERIES
To replace the batteries of the infrared remote control,
proceed as follows:
1. Open the battery cover by sliding it in the direction
of the arrow.
2. Take out the old batteries
3. Insert new alkaline high-performance LR03 (AAA)
1.5V (penlight) batteries, being careful not to invert
the polarity.
4. Close the battery cover.
1.
2.
3.
4.

SCARICA L’ULTIMA VERSIONE: DOWNLOAD THE LATEST VERSION: TÉLÉCHARGER LA DERNIÈRE VERSION:
http://www.aermec.com/qrcode.asp?q=15119 http://www.aermec.com/qrcode.asp?q=15120 http://www.aermec.com/qrcode.asp?q=15121
BITTE LADEN SIE DIE LETZTE VERSION HERUNTER: DESCARGUE LA ÚLTIMA VERSIÓN:
http://www.aermec.com/qrcode.asp?q=15122 http://www.aermec.com/qrcode.asp?q=15123
AERMEC S.p.A.
Via Roma, 996 - 37040 Bevilacqua (VR) - Italy
Tel. [phone] - Fax [phone]
[email protected] - www.aermec.com
SCARICA L’ULTIMA VERSIONE: DOWNLOAD THE LATEST VERSION: TÉLÉCHARGER LA DERNIÈRE VERSION:
BITTE LADEN SIE DIE LETZTE VERSION HERUNTER: DESCARGUE LA ÚLTIMA VERSIÓN: