AFi HBFB-CYN R-29574X User manual

Before assembling your bed, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Congratulations!
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Adult assembly
ASSEMBLY INSTRUCTIONS
Page 1 of 3
Step 1
Instructions apply for bed sizes
QUEEN > KING
PARTS LIST HARDWARE
READY
ASSEMBLE
TO
HEADBOARD PANEL 1 PC
1
2
3
4
5
1 PC
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
PILLOW STOP
FOOTBOARD
Allen wrench - 1pc
Barrel Nut - 2pcs
Spare - 1pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 40mm (1 1/2”) - 6 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs
Spare - 1 pc
Spare - 1 pc
B
C
E
D
AWooden dowel - 4 pcs
Spare - 1 pc
Attach the legs (2) and (3) to pillow stop (4), using JCB (C) and barrel nut (D). Do not tighten at this
step. Attach leg assembly to headboard panel (1), using wood dowels (A) and JCB (B).
Tighten all with the Allen wrench (E).
Adult assembly
41
2
3
D
A
C
D
D
C
C
A
B
B
B
B
B
B
B
A
A
A
PO:
CODE ITEM ITEM
HBFB-CYN R-29574X R-29575X
A
BED WITH MATCHING FOOTBOARD

Page 2 of 2
01
02
03
04
05
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
SLAT KIT
BOX 1
04
04
04
02
03
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
Step 1
Adult assembly
Adult assembly
Step 2
BOX 2
Attach slat kit (05) onto the bed. For assembly of slat kit, follow the assembly instructions
included with bed frame.
05
05
UPPER
LOWER
Use the upper set of pins when
using mattress only, storage drawers
or Trundle bed. Use the lower set of
pins if using foundation and mattress.

02
A
A
E
E
F
F
H
ASSEMBLY INSTRUCTION
( KING )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
H
Please note that you will require a Phillips screwdriver and an Allen wrench.
Allen wrench
Assemble support leg (03 / 04) and support rail (02).
Assemble bed frame according to assembly instructions.
If using mattress and foundation set the bed up low and use short support leg.
If using Storage Drawers or Trundle Bed choose the tall support leg.
Using JCB(A) split and flat washer (E)(F).
Tighten with the Allen wrench M6 (H).
Repeat for other support rail.
Page 1 of 2
03 / 04
03 / 04
HARDWARE
A
B
C
EF
DG
H
1 5/8” JCB M8 - 4 pcs
1 3/8” JCB M6 - 6 pcs
Cap Nut - 6 pcs
Split Washer - 4 pcs Flat Washer - 4 pcs
Spare - 1 pc
Spare - 1 pc
1 1/4” Wood screw - 12 pcs
Spare - 1 pc
Spare - 1 pc Spare - 1 pc
Allen wrench M4 - 1 pc
Allen wrench M6 - 1 pc
Spare - 1 pc
01
02
03
03
SLAT KIT
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
A
1 5/8” JCB M8
READY
ASSEMBLE
TO
PO :
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Step 1
Step 2
04
04
03
SLAT SECTION
SUPPORT RAIL
2 SET
2 PCS
4 PCS
01
02
03
SHORT SUPPORT LEG 4 PCS
04
TALL SUPPORT LEG
CODE ITEM
SL-PF E-65503

Page 2 of 2
Lay the slat section (01) onto the bed. Attach support rail (02) to slat section(01).
Using JCB (B) and cap nut (C) tighten with the Allen wrench (G).
Repeat for section 2.
Screw slat section (01) to side rail,
using wood screw (D). Tighten with
Phillips screwdriver. (Customer supplied)
Be sure the space between slats is even.
D
B
B
B
C
C
C
01
01
D
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips screwdriver
Customer supplied
Be sure to align slat section evenly
with both ends of side rail.
02
D
B
1 3/8” JCB M6
CG
Cap nut Allen wrench
Adult assembly
Adult assembly
Step 3
Step 4
B
C
( KING )

Adult assembly
READY
ASSEMBLY INSTRUCTIONS
TWIN XL
Before assembling your Trundle bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
TRUNDLE BED
Page 1 of 3
HARDWARE
A
C
JCB M6 X 1 5/8”( 40mm ) - 17 pcs
Spare - 1 pc
D
L Bracket - 3 pcs
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
JCB M6 X 5/8”( 15mm ) - 6 pcs
Spare - 1 pc
Fix L bracket to front panel
B
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
PO :
CODE ITEM
ST-TD-UBN E-6711X

PARTS LIST
01
02
03
04
HARDWARE 1 BOX 2 PCS
1 PC
2 SET
1 PC
1 PC
1 PC
FRONT PANEL
FRONT RAIL
BACK RAIL
05
06
07
SIDE CROSS RAIL
CENTER CROSS RAIL
SLAT KIT
01
03
03
04
04
05
05
05
07
07
06
06
05
Attach the side cross rails (05) and center cross rail (06) to the front and back rail (03)(04), using
L bracket (C), JCB M6 X 1 5/8”(A). Tighten with the Allen wrench (D).
02
Page 2 of 3
A
A
C
C
C
A
A
A
A
D
Allen wrench
A
C
L Bracket
JCB M6 X 1 5/8”
Step 1
Adult assembly
TWIN XL
C

Attach the front panel (02) to the front rail as shown, using JCB M6 X 5/8” (B).
Tighten with the Allen wrench (D).
Lay the slat kit (07) onto the rail assembly as shown, using JCB M6 X 1 5/8” (A).
Tighten with the Allen wrench (D).
Page 3 of 3
02
07
07
B
A
A
A
A
A
A
A
A
B
B
Step 2
Step 3
D
Allen wrench
B
JCB M6 X 5/8”
Adult assembly
D
Allen wrench
A
JCB M6 X 1 5/8”
Adult assembly
Congratulations!
Your Trundle bed is now ready for use.
We recommend that you periodically check that all screws are tight
and all parts are secure to ensure lasting safety.
TWIN XL