Agilent Technologies 4263B User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Keysight / Agilent 4263B at our website: Click HERE

○
CCopyright 2007 Agilent Technologies
Agilent 4263B LCR Meter Operation Manual
Manual Change
Agilent Part No. N/A
July 2008
Change 1
Change the Measurement Uncertainty value of Test Signal Frequency Accuracy Test (Page
9-38) to the following information.
Test Signal
Frequency Test Limits Test Result1 Measurement Uncertainty
100 Hz ±0.010 Hz Hz ± 0.00031 Hz
120 Hz ±1.200 Hz Hz ± 0.00034 Hz
1 kHz ±0.00010 kHz kHz ± 0.0000029 kHz
10 kHz ±0.0010 kHz kHz ± 0.000019 kHz
20 kHz ±0.0010 kHz kHz ± 0.000020 kHz
100 kHz ±0.010 kHz kHz ± 0.00019 kHz
Change 2
Change the Measurement Uncertainty value of Test Signal Level Accuracy Test (Page 9-38)
to the following information.
Test Signal
Level
Test Signal
Frequency
Test Limits
Test Result1 Measurement Uncertainty
50 mV 100 Hz ±15.0 mV ± 0.90 mV
50 mV 20 kHz2±15.0 mV ± 0.078 mV
50 mV 100 kHz ±15.0 mV ± 0.18 mV
250 mV 100 Hz ±35.0 mV ± 2.50 mV
250 mV 20 kHz ±35.0 mV ± 0.35 mV
250 mV 100 kHz ±35.0 mV ± 1.88 mV
1 V 100 Hz ±0.11 V ± 0.00349 V
1 V 20 kHz ±0.11 V ± 0.00148 V
1 V 100 kHz ±0.11 V ± 0.00109 V
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 3
Change the Measurement Uncertainty value of DC Bias Level Accuracy Test (Page 9-39) to
the following information.
DC Bias Level
Test Limits
Test Result1
Measurement
Uncertainty
0 V ±0.002 V V ± 0.088 mV
1.5 V ±0.077 V V ± 0.44 mV
2 V ±0.102 V V ± 0.92 mV
Change 4
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Capacitance Measurement Accuracy Test (Meas. Time Mode: LONG) (Page 9-40) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
10 pF 100 kHz Cp ±0.331 pF pF ± 0.0040 pF
D ±0.0331 ± 0.00043
100 pF 1 kHz Cp ±0.19 pF pF ± 0.0074 pF
D ±0.0019 ± 0.000063
100 pF 10 kHz Cp ±0.44 pF pF ± 0.017 pF
D ±0.0044 ± 0.00023
100 pF 20 kHz2Cp ±1.10 pF pF ± 0.021 pF
D ±0.0110 ± 0.000091
100 pF 100 kHz Cp ±1.37 pF pF ± 0.019 pF
D ±0.0137 ± 0.00033
1000 pF 100 Hz Cp ±2 pF pF ± 0.000098 nF
D ±0.0020 ± 0.000063
1000 pF 1 kHz Cp ±0.0012 nF pF ± 0.000092 nF
D ±0.0012 ± 0.000064
1000 pF 100 kHz Cp ±0.0128 nF pF ± 0.00012 nF
D ±0.0128 ± 0.00033
0.01 μF 100 Hz Cp ± 0.018 nF pF ± 0.00065 nF
D ±0.0018 ± 0.000022
0.01 μF 120 Hz Cp ± 0.018 nF pF ± 0.00059 nF
D ±0.0018 ± 0.000022
0.01 μF 1 kHz Cp ± 0.011 nF pF ± 0.00076 nF
D ±0.0011 ± 0.000021
0.01 μF 10 kHz Cp ± 0.018 nF pF ± 0.00067 nF
D ±0.0018 ± 0.000036
0.01 μF 100 kHz Cp ± 0.128 nF pF ± 0.00087 nF
D ±0.0128 ± 0.00022
0.1 μF 1 kHz Cp ± 0.11 nF pF ± 0.0068 nF
D ±0.0011 ± 0.000023
0.1 μF 100 kHz Cp ± 1.47 nF pF ± 0.015 nF
D ±0.0147 ± 0.00026
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Capacitance Measurement Accuracy Test (Meas. Time Mode: LONG) (Page 9-41) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
1 μF 100 Hz Cp ±0.0018 μF pF ± 0.000074 μF
D ±0.0018 ± 0.000047
1 μF 120 Hz Cp ±0.0018 μF pF ± 0.000073 μF
D ±0.0018 ± 0.000047
1 μF 1 kHz Cp ±0.0011 μF pF ± 0.000067 μF
D ±0.0011 ± 0.000032
1 μF 10 kHz Cp ±0.0026 μF pF ± 0.00014 μF
D ±0.0026 ± 0.000069
1 μF 100 kHz Cp ±0.0176 μF pF ± 0.00018 μF
D ±0.0176 ± 0.00032
Change 5
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Capacitance Measurement Accuracy Test (Meas. Time Mode: MED) (Page 9-41) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
0.01 μF 100 Hz Cp ± 0.063 nF pF ± 0.00070 nF
100 Hz D ±0.0063 ± 0.000043
0.01 μF 100 kHz Cp ± 0.271 nF pF ± 0.0023 nF
100 kHz D ±0.0271 ± 0.00044
Change 6
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Capacitance Measurement Accuracy Test (Meas. Time Mode: SHORT) (Page 9-41) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
0.01 μF 100 Hz Cp ± 0.179 nF pF ± 0.011 nF
D ±0.0179 ± 0.00072
0.01 μF 100 kHz Cp ± 0.287 nF pF ± 0.00081 nF
D ±0.0287 ± 0.00069
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 7
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Capacitance Measurement Accuracy Test (DC Bias: ON) (Page 9-41) to the following
information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
1 μF 1 k Cp ±0.0011 μFμF ± 0.000066 μF
D ±0.0011 ± 0.000033
Change 8
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Resistance Measurement Accuracy Test (Meas. Time Mode: LONG) (Page 9-42) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±0.52 mohm mohm ± 0.030 mohm
100 mohm 1 kHz R ±0.48 mohm mohm ± 0.030 mohm
Change 9
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Resistance Measurement Accuracy Test (Meas. Time Mode: MED) (Page 9-42) to the
following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±0.62 mohm mohm ± 0.033 mohm
Change 10
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m Resistance Measurement Accuracy Test (Meas. Time Mode: SHORT) (Page 9-42) to
the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±1.10 mohm mohm ± 0.13 mohm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 11
Change the Measurement Uncertainty value of 0 m Impedance Measurement Accuracy Test
for 0 m DC Resistance Measurement Accuracy Test (Opt. 001 Only) (Page 9-42) to the
following information.
Standard
Test Limits
Test Result1
Measurement
Uncertainty
100 mohm ±0.97 mohm mohm ± 0.039 mohm
100 kohm ±0.87 kohm kohm ± 0.013 kohm
Change 12
Change the Measurement Uncertainty value of 1 m Impedance Measurement Accuracy Test
for 1 m Capacitance Measurement Accuracy Test (Page 9-43) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 pF 1 kHz Cp ±0.19 pF pF ± 0.0077 pF
D ±0.0019 ± 0.000063
100 pF 10 kHz Cp ±0.48 pF pF ± 0.012 pF
D ±0.0048 ± 0.00013
100 pF 20 kHz2Cp ±1.10 pF pF ± 0.024 pF
D ±0.0110 ± 0.000085
100 pF 100 kHz Cp ±1.37 pF pF ± 0.010 pF
D ±0.0137 ± 0.00016
1000 pF 100 Hz Cp ±0.002 nF pF ± 0.000091 nF
D ±0.0020 ± 0.000063
1 μF 100 Hz Cp ±0.0018 μFμF ± 0.000075 μF
D ±0.0018 ± 0.000047
1 μF 1 kHz Cp ±0.0011 μFμF ± 0.000069 μF
D ±0.0011 ± 0.000033
1 μF 10 kHz Cp ±0.0026 μFμF ± 0.00014 μF
D ±0.0026 ± 0.000061
1 μF 100 kHz Cp ±0.0207 μFμF ± 0.00016 μF
D ±0.0207 ± 0.00029
Change 13
Change the Measurement Uncertainty value of 1 m Impedance Measurement Accuracy Test
for 1 m Resistance Measurement Accuracy Test (Page 9-43) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±0.60 mohm mohm ± 0.030 mohm
100 mohm 1 kHz R ±0.60 mohm mohm ± 0.031 mohm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 14
Change the Measurement Uncertainty value of 1 m Impedance Measurement Accuracy Test
for 1 m DC Resistance Measurement Accuracy Test (Opt. 001 Only) (Page 9-43) to the
following information.
Standard
Test Limits
Test Result1
Measurement
Uncertainty
100 mohm ±1.05 mohm mohm ± 0.030 mohm
100 kohm ±0.87 kohm kohm ± 0.014 kohm
Change 14
Change the Measurement Uncertainty value of 2 m Impedance Measurement Accuracy Test
for 2 m Capacitance Measurement Accuracy Test (Page 9-44) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 pF 1 kHz Cp ±0.19 pF ± 0.011 pF
D ±0.0019 ± 0.000073
100 pF 10 kHz Cp ±0.51 pF ± 0.013 pF
D ±0.0051 ± 0.00014
100 pF 20 kHz2Cp ±1.10 pF ± 0.022 pF
D ±0.0110 ± 0.000094
1 nF 100 Hz Cp ±0.002 nF ± 0.000090 nF
D ±0.0020 ± 0.000075
1 μF 100 Hz Cp ±0.0018 μF ± 0.000077 μF
D ±0.0018 ± 0.000047
1 μF 1 kHz Cp ±0.0011 μF ± 0.000069 μF
D ±0.0011 ± 0.000033
1 μF 10 kHz Cp ±0.0026 μF ± 0.00014 μF
D ±0.0026 ± 0.000062
Change 15
Change the Measurement Uncertainty value of 2 m Impedance Measurement Accuracy Test
for 2 m Resistance Measurement Accuracy Test (Page 9-44) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits
Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±0.68 mohm mohm ± 0.030 mohm
100 mohm 1 kHz R ±0.72 mohm mohm ± 0.034 mohm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 16
Change the Measurement Uncertainty value of 2 m Impedance Measurement Accuracy Test
for 2 m DC Resistance Measurement Accuracy Test (Opt. 001 Only) (Page 9-44) to the
following information.
Standard
Test Limits Test Result1
Measurement
Uncertainty
100 mohm ±1.13 mohm mohm ± 0.030 mohm
100 kohm ±0.87 kohm kohm ± 0.014 kohm
Change 17
Change the Measurement Uncertainty value of 4 m Impedance Measurement Accuracy Test
for 4 m Capacitance Measurement Accuracy Test (Page 9-45) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 pF 1 kHz Cp ±0.19 pF pF ± 0.0078 pF
1 kHz D ±0.0019 ± 0.000065
1000 pF 100 Hz Cp ±0.002 nF pF ± 0.000089 nF
100 Hz D ±0.0020 ± 0.000062
1 μF 100 Hz Cp ±0.0018 μFμF ± 0.000077 μF
100 Hz D ±0.0018 ± 0.000047
1 μF 1 Hz Cp ±0.0011 μFμF ± 0.000071 μF
1 kHz D ±0.0011 ± 0.000033
Change 18
Change the Measurement Uncertainty value of 4 m Impedance Measurement Accuracy Test
for 4 m Resistance Measurement Accuracy Test (Page 9-45) to the following information.
Standard
Test Signal
Frequency Parameter Measured Test Limits Test Result1
Measurement
Uncertainty
100 mohm 100 Hz R ±0.84 mohm mohm ± 0.030 mohm
100 mohm 1 kHz R ±0.96 mohm mohm ± 0.030 mohm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

○
CCopyright 2007 Agilent Technologies
Change 19
Change the Measurement Uncertainty value of 4 m Impedance Measurement Accuracy Test
for 4 m DC Resistance Measurement Accuracy Test (Opt. 001.Only) (Page 9-45) to the
following information.
Standard
Test Limits
Test Result1Measurement
Uncertainty
100 mohm ±1.29 mohm mohm ± 0.030 mohm
100 kohm ±0.87 kohm kohm ± 0.013 kohm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Agilent 4263B LCR Meter Operation Manual
Manual Change
Agilent Part No. N/A
July 2007
Change 1
Add the following steps to the step 2 of DC Bias LevelAccuracy Test (page 9-9).
2-a. Set the test signal frequency to 100 kHz using Freq.
2-b. Set the test signal level to 50 mV using Level.
Change 2
Change the figure 9-4 of DC Bias Level Accuracy Test Setup without the Interface Box (page 9-10) as
follows.
○
CCopyright 2007 Agilent Technologies
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com