Agilent Technologies 490 Micro GC Operating and maintenance instructions

Agilent Technologies
Agilent 490 Micro GC
Natural Gas Analyzer
Installation and Configuration
This document describes where to find detailed software
installation and configuration information for the Agilent 490
Micro GC Natural Gas Analyzer. See the section(s) below as
appropriate for the available software.
Agilent OpenLAB CDS EZChrom Edition or ChemStation Edition
For installation and configuration information, see the
Agilent OpenLAB Chromatography Data System (CDS)
Workstation Installation Guide (CDS_WS- Installation
Guide.pdf). Find this document on the OpenLAB CDS DVD
in folder \Disk1\Docs. Available in several languages.
Agilent EZChrom Elite
For installation and configuration information, see the
EZChrom Elite Installation Guide.
EZReporter
EZReporter is an optional software package for calculating
the calorific value of natural gas samples (heating value
calculation). Installation of EZReporter will be done by an
Agilent Customer Engineer.
Find detailed information about EZReporter installation and
configuration in the following manuals:
•EZReporter Quick Start Guide (either the EZChrom
Edition or ChemStation Edition)
•EZReporter Software reference manual

Agilent Technologies
To establish the connection between EZReporter and the
Agilent data system, two steps are important:
1Calibration. For creating a calibration method or
performing calibration runs, find detailed instructions in
either:
•EZChrom Elite online help and tutorial
•OpenLAB CDS online help and tutorial
2Exporting Raw Data. Configure the Agilent data system
(EZChrom Elite or OpenLAB CDS, either edition) to
export raw data as described in:
•EZReporter Quick Start Guide—EZChrom Edition
•EZReporter Quick Start Guide—ChemStation Edition
The material contained in this document is provided “as is,” and is subject to being
changed, without notice, in future editions. Further, to the maximum extent permitted by
applicable law, Agilent disclaims all warranties, either express or implied, with regard to
this manual and any information contained herein, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. Agilent shall not be liable
for errors or for incidental or consequential damages in connection with the furnishing,
use, or performance of this document or of any information contained herein. Should
Agilent and the user have a separate written agreement with warranty terms covering the
material in this document that conflict with these terms, the warranty terms in the separate
agreement shall control.
© Agilent Technologies, Inc. 2012
No part of this manual may be reproduced in any form or by any means (including electronic
storage and retrieval or translation into a foreign language) without prior agreement and
written consent from Agilent Technologies, Inc. as governed by United States and
international copyright laws.
G3582-90003
First edition, May 2012
Printed in The Netherlands
P.O. Box 8033
4330 EA Middelburg
The Netherlands