Agilent Technologies E5900B User manual

The test & measurement
equipment you need at
the price you want.
Alltest carries the world’s largest selection of
used/refurbished benchtop test & measurement
equipment at 50% the price of new.
O
Our equipment is guaranteed working, warrantied, and
available with certified calibration from our in-house staff
of technicians and engineers.
• 10+ full time technicians with over 150 years of
specialization
• 90 day warranty & 5 day right of return on all
equipment
•
• 1-3 year warranties for new and
premium-refurbished equipment
• Every unit tested to OEM specifications
• Satisfaction guaranteed
You have plans, we will help you achieve them.
Any project. Any budget.
Get a quote today!
CCall [phone] or email [e-mail].
t
Alltest Instruments, Inc.
500 Central Ave.
Farmingdale, NJ 07727
P: [phone]
F: [phone]
alltest.net
s
[e-mail]

Agilent E5900B/E5901B
Publication number E5902-97002
February 2001
© Copyright Agilent Technologie , Inc. 1994-2001
All Right Re erved
For Safety information, Warrantie , and Regulatory information, ee
the page behind the index.
Supplement to Emulation
and Solution User’s Guides

2 E5900B / E5901B User’s Guide Supplement
Agilent Technologies E5900B Emulation
Pro e—At a Glance
Thi manual de cribe how to et up everal emulation product : an emulation
probe, an emulation module, an emulation migration, and an emulation
olution.
The emulation probe can be controlled by a debugger on a ho t computer or
by the Emulation Control Interface on an Agilent 16700- erie logic analy i
y tem.
E5900B Emulation Probe
The emulation probe communicate with a ho t computer or logic analy i
y tem via LAN.
After the User’s Guide for your emulator was written, new versions of the
emulation probe, emulation module, emulation migration, and emulation solution
have been released. Use this manual along with the processor-specific
emulation or solution User’s Guide.
Host
Computer
E5900B
Emulation Probe
LAN Cable
Target System

E5900B / E5901B User’s Guide Supplement 3
Agilent Technologies E5900B Emulation Probe—At a Glance
E5901B Emulation Module
The Agilent E5901B emulation module plug into your Agilent 16700- erie
logic analy i y tem frame. It provide power, cro triggering, and limited
communication for the E5900B emulation probe through the module/probe
interconnect cable. The logic analy i y tem communicate with the target
y tem through the LAN connection to the E5900B emulation probe.
E5902B Emulation Migration
The emulation migration include the part needed to u e an emulation probe
for a new proce or family.
E9xxxB Emulation Solution
The emulation olution now include an E5900B emulation probe and an
E5901B emulation module. Thi manual uper ede the information about the
emulation module in the Solution User’s Guide. You may di regard the
proce or- pecific Emulation User’s Guide.
The E5901B emulation module must be used with an E5900B emulation probe.
This is a major change from the E5901A (16610A) emulation module, which could
be connected directly to a target system through a target interface module
(TIM).
Logic Analysis
System
Target System
E5901B Emulation Module
E5900B Emulation Probe
Module/Probe Interconnect Cable
LAN Cable

4 E5900B / E5901B User’s Guide Supplement
When To Use This Book
When To Use This Book
The Setup A i tant i an online tool for connecting and configuring your logic
analy i y tem for microproce or and bu analy i . The Setup A i tant i
available on Agilent Technologie 16700- erie logic analy i y tem .
After the User’s Guide for your emulator was written, new versions of the
emulation probe, emulation module, emulation migration, and emulation solution
have been released. Use this manual along with the processor-specific
emulation or solution User’s Guide.
Task This book
Emulation or
solution
User’s Guide
Setup
Assistant
Designing your target system to
be compatible with the emulator
✓
Connecting and configuring an
analysis probe
✓if needed ✓be t
Connecting the emulation probe
to your logic analysis sytem or PC
✓
Installing an emulation module ✓
Installing an emulation migration ✓
Connecting the emulator to your
target system
✓over-
view
✓if needed ✓be t
Configuring the emulator ✓
Setting up a debugger to work
with your emulator
✓✓
Troubleshooting the emulator ✓✓

Contents
5
Agilent Technologie E5900B Emulation Probe—At a Glance 2
E5900B Emulation Probe 2
E5901B Emulation Module 3
E5902B Emulation Migration 3
E9xxxB Emulation Solution 3
When To U e Thi Book 4
1Overview 11
Setup Flowchart 13
Agilent E5900B Emulation Probe 14
Equipment upplied 14
Minimum equipment required 15
To connect the emulation probe to a power ource 16
Connection Sequence 17
To power on the y tem 17
To power off the y tem 17
Agilent E5901B Emulation Module 18
Equipment upplied 18
Minimum equipment required 19
Agilent E5902B Emulation Migration 20
Equipment upplied 20
Minimum equipment required 21
E9xxxB Emulation Solution 22
Equipment upplied 22
In talling Software on a Logic Analy i Sy tem 23
!

6
Contents
Additional Information Source 24
2Connecting the Emulation Probe to a AN 25
To choo e a point-to-point or ite LAN connection 26
Connecting the Emulation Probe to a Site LAN 28
To obtain an IP addre 29
To configure LAN parameter u ing a erial connection 30
To configure LAN parameter u ing DHCP 33
What i DHCP? 34
How doe the emulation probe u e DHCP? 34
How doe DHCP interact with other method of etting LAN parameter ? 34
To configure LAN parameter u ing a logic analy i y tem without an emula-
tion module 34
To configure LAN parameter u ing a logic analy i y tem with an emulation
module 35
Setting up a Point-to-Point Connection 36
To et up a point-to-point connection with an emulation module 36
To et up a point-to-point connection without an emulation module 37
Verifying LAN Communication 38
To verify LAN communication u ing ping 38
To verify LAN communication u ing telnet 38
3Installing the Emulation Module 41
To in tall the emulation module in an Agilent 16700- erie logic analy i y -
tem or expan ion frame 43
To connect the E5901B emulation module to the E5900B emulation

Contents
7
probe 45
4Connecting the Emulator to Your Target
System 47
De igning a Target Sy tem 49
ARM target y tem 49
To connect the emulator to the target y tem 50
5Configuring the Emulator 53
What can be configured 54
Configuring the Emulation Probe for Maximum Performance
(JTAG) 55
Configuring the Emulation Probe for Maximum Performance
(BDM) 57
6Using the Emulator with a Debugger 59
Connecting to an Emulation Module 60
Web Interface 60
7Coordinating ogic Analysis with Processor

8
Contents
Execution 61
To connect the trigger ignal to a logic analyzer with an emulation
module 64
To connect the trigger ignal to a logic analyzer without an emulation
module 65
To cro -trigger the emulation probe and a 16700- erie logic analy i
y tem 66
8Updating Firmware 67
Updating Firmware When You Do Not Have a Logic Analy i
Sy tem 69
To di play current firmware ver ion information 69
To update firmware from the web 69
To update firmware from a floppy di k 69
Updating Firmware When You Have a Logic Analy i Sy tem 70
To di play current firmware ver ion information 70
To update firmware u ing the Emulation Control Interface 70
To update firmware for an emulation module u ing the Setup A i tant 71
9Installing an Agilent E5902B Emulation
Migration 73
To in tall the emulation migration 74
10 Specifications and Characteristics 79

Contents
9
Emulation probe electrical characteri tic 80
Emulation probe environmental characteri tic 81
Emulation module environmental characteri tic 81
11 Troubleshooting the Emulator 83
Trouble hooting Guide 85
Step 1: Telnet to the emulation probe 85
If you cannot connect to the emulation probe 85
Step 2: Check the prompt 85
If a telnet connection to the emulation probe di play the prompt "->" 85
If a telnet connection to the emulation probe di play the prompt "?>" 86
Step 3: Try ome imple command to control the target 87
If the emulation probe ha problem controlling the target 87
Step 4: Check the emulation module 88
If you have problem u ing the emulation probe a an emulation module in a
16700- erie logic analy i y tem 88
Step 5: Check your debugger connection 89
If you have problem u ing the emulation probe with a debugger 89
If you need to obtain help 90
Statu Light 91
Emulation Probe Target Statu Light 91
Emulation Probe LAN Statu Light 92
Emulation Probe Power On Light 92
Emulation Probe Built-in Command 93
To telnet to the emulation probe 93
To u e the built-in command 94
Problem with the Target Sy tem 96
What to check fir t 96

10
Contents
Problem with the LAN Interface 97
If you cannot verify LAN communication 97
If you have LAN connection problem 98
If it take a long time to connect to the network 98
If you have problem etting the LAN parameter u ing a logic analy i
y tem 98
Problem with the Serial Interface 100
If you cannot verify RS-232 communication 100
If you have RS-232 connection problem with the MS Window Terminal
program 100
Problem with the Emulation Module 102
To te t the emulation module 102
Problem with the Emulation Probe 103
To run the emulation probe performance verification te t 103
To run the performance verification te t u ing the logic analy i y tem 103
To run complete performance verification te t u ing a erial or telnet
connection 104
If a performance verification te t fail 105
Returning Part for Service 107
To return a part to Agilent Technologie 107
To obtain replacement part 108
To clean the in trument 109
Glossary 111

11
1
Overview

12 E5900B / E5901B User’s Guide Supplement
Overview
Thi chapter de cribe :
• Setup flowchart
• Equipment u ed with the emulation probe
• Connection equence for the emulation probe
• Equipment u ed with the emulation module
• Additional information ource

E5900B / E5901B User’s Guide Supplement 13
Overview
Setup Flowchart
Setup Flowchart
Install emulation
module
(if necessary)
Install software on
logic analysis system
Installation done. Begin
making measurements.
Connect emulator
to target system
or analysis probe
E8130F01.VSD
Connect power
supply
Connect to LAN
Update emulator
firmware
(if necessary)
Migrating
a module or
a probe?
Probe
Emulation module
HP E5901B
Emulation migration
HP E5902B
Emulation probe
HP E5900B
Module
Install new target
board adapter and
front panel in
emulation probe
Connect emulation
probe to LAN
Connect emulation
probe to emulation
module

14 E5900B / E5901B User’s Guide Supplement
Overview
Agilent E5900B Emulation Probe
Agilent E5900B Emulation Pro e
Equipment supplied
• Emulation probe.
• 12V power upply for the emulation probe.
• Power cord.
• Ferrite (reduce electromagnetic interference on power cord).
• Serial cable.
• RJ12-to-DB9 adapter.
• Ribbon cable (connect the emulation probe to your target y tem).
• Firmware for the emulation probe on 3.5-inch di k . (Included only for
E5900B option which need everal firmware ver ion to upport different
target proce or .)
•Thi User’s Guide Update.
•An Emulation User’s Guide for your proce or.

E5900B / E5901B User’s Guide Supplement 15
Overview
Agilent E5900B Emulation Probe
Minimum equipment required
The following equipment i required to u e the emulation probe:
• A method for connecting the emulation probe to the target y tem. The
target y tem mu t have an appropriate JTAG or BDM debug port
connector. If your target y tem doe not have a debug port connector,
you may be able to u e the debug port connector which i built into ome
analy i probe . The target y tem mu t meet the criteria on page 49.
• A ho t computer, uch a a PC or work tation. You can al o connect the
emulation probe to an Agilent 16700- erie logic analy i y tem.
• A LAN (local area network) to connect the emulation probe to the ho t
computer or logic analy i y tem.
• A u er interface on the ho t computer, uch a a high-level ource
debugger or the logic analy i y tem’ Emulation Control Interface.

16 E5900B / E5901B User’s Guide Supplement
Overview
Agilent E5900B Emulation Probe
To connect the emulation pro e to a power source
The emulation probe i hipped from the factory with a power upply and cord
appropriate for your country. If the cord you received i not appropriate for
your electrical power outlet type, contact your Agilent Technologie ale and
ervice office.
WARNING: Use only the supplied Agilent F1044B power supply and cord. Failure to use
the proper power supply could result in electric shock.
CAUTION: U e only the upplied Agilent power upply and cord. Failure to u e the
proper power upply could re ult in equipment damage.
1In tall the ferrite on the 12V power cord, near the end which plug into
the emulation probe.
2Connect the power cord to the power upply and to a ocket outlet.
3Connect the 12V power cord to the back of the emulation probe.
4Turn on the emulation probe power witch.
Ferrite
!

E5900B / E5901B User’s Guide Supplement 17
Overview
Agilent E5900B Emulation Probe
Connection Sequence
Di connect power from the target y tem, emulation probe, and logic analyzer
before you make or break connection .
1Connect the emulation probe to a LAN (page 25).
2Connect the emulation probe to your target y tem (page 47).
3Configure the emulation probe (See your proce or- pecific emulation
or olution User’s Guide).
To power on the system
With all component connected, power on your y tem a follow :
1Logic analyzer, if you are u ing one.
2Emulation probe.
3Your target y tem.
To power off the system
Power off your y tem a follow :
1Your target y tem.
2Emulation probe.
3Logic analyzer, if you are u ing one.

18 E5900B / E5901B User’s Guide Supplement
Overview
Agilent E5901B Emulation Module
Agilent E5901B Emulation Module
Equipment supplied
The equipment upplied with your emulation module include :
• All of the part li ted for the Agilent E5900B emulation probe (page 14).
• Agilent E5901B emulation module. If you ordered an emulation module a
part of your Agilent 16700- erie logic analy i y tem, it i already
in talled in the frame.
• Module/probe interconnect cable (connected to the emulation module).
• Serial cable.
• RJ12-to-DB9 adapter.
• Firmware for the emulation probe and oftware for the Emulation Control
Interface on a CD-ROM.
• Torx T-10 and T-15 crewdriver .

E5900B / E5901B User’s Guide Supplement 19
Overview
Agilent E5901B Emulation Module
Minimum equipment required
The following equipment i required to u e the emulation module:
• A method for connecting the emulation probe to the target y tem. The
target y tem mu t have an appropriate JTAG or BDM debug port
connector. If your target y tem doe not have a debug port connector,
you may be able to u e the debug port connector which i built into ome
analy i probe . The target y tem mu t meet the criteria on page 49.
• An Agilent 16700- erie logic analy i y tem.
• A u er interface, uch a a high-level ource debugger or the logic analy i
y tem’ Emulation Control Interface.