Aiphone GF-MK User manual

I SECURITY GUARD STATION 1
INSTALLATION & OPERATIONMANUAL
PRECAUTIONS
A WARNING (Negligencecould result indeathorserious
injury
to people.)
1. Do not openthe unitcase.
8
2. Do not dismantleor alterthe unit. Fireor electricshock
couldresults.
3. Keepthe unitaway fromwater or any other liquid.
Fireor electricshockcould result.
4. Do not put any metalintothe unitthroughopenings.
Fire, electricshockor unittrouble could result.
8
A CAUTION (Negligence could result in injury to people
ordamage
to property)
1. Mountthe uniton wall ina convenientlocation,but not
where itcould be bumpedor jarredhjury could result.
2. Do not install or make any wire terminationswhile power
supplyisturnedon. Unittrouble could result.
3. Beforeturningon power supply, make surewiresare not
crossedor shorted. Unit troublecould result.
4. Do not manuallyholddown hookswitchtoverify chime
volume. Itsoundsvery loud near your ears and can
causeyour hearingdamage.
5. Do not press hardor put high impacton LCD. If glass
cover is broken, you may be injured,and never touchthe
liquidinsidepanel, as itcancausean inflammationon
your skin.
If the liquidadheresto any partof your body,
mouthor eyes, immediatelygargleor cleansewith clear
water for at least
15 minutesandconsultyour doctor.
8
8
8
8
6. Do not installthe unit inany of thefollowinglocations,as
it maycausethe system to malfunction;
- High or extremecoldtemperaturearea: under directsunlight,
near equipment that varies in temperature, infrontof air
conditioner,insidea refrigeratedarea,etc.
- Placessubjectto moistureor humidityextremes.
- Placessubjectto environmentalconditions,
- Placessubjectto constantvibrationor impact. 8
- Placessubjectto steam or smoke, suchas near heating
8
suchas oil, dust, chemicals,salt, etc.
8
8
appliances,cookingsurface,etc.
GENERAL PRECAUTIONS
1. All the units,except the EntranceStation,isdesignedfor
indooruseonly. Do not installthem outdoors.
2. The system is not operableduringa power failure.
3. Inareaswhere broadcastingstationantennasare close
by, intercomsystemmaybe affectedby radiofrequency
interference.
4. Keepallwiring at least30cm (1") away fromAC 100-240V
wiring,fluorescentlighting,or dimmer switches.
Otherwise,crossAC wiring at a 90" angle.
GeneralProhibitions Prohibitionsto subject
Prohibitions
to
dismantlethe unit the unittowater
NAMESAND FUNCTIONS 1. Handset PACKAGECONTENTS
Mountingbracket
= Packetof screws
Connectingcable
* INSTALLATION & OPERATION
2. LCDdisplay
3.
% CANCEL (ordecide & back)
1
2
4. A SCROLLbackward or move cursorto left
3
6 5. SCROLLforward or movecursorto right
6.
0 CALL (ordecide & next)
4
7 7.
Digitalkeypad (1 - 0, *, #)
5
*
10
11
12 10.DOOR RELEASE button
11.Off-hookwarningLED
13 12.Calltonesounder
14 EntranceStation,pressto 13.Calltonevolume control
14.PC socket
~henenfering/e~e~;A-Z,
0 = [, ][ -1 [. ] [ /] [ ]
Functions : * DialingRoom #
* Namesearch with @ key andcalling
8. SERVICE button(Option)
9. LIGHT button When communicationwith
turn on externallight.
\-I
PROGRAMMING METHODS COMMUNICATIONFUNCTIONS
Programmingby PC
- It is possible to write or change resident names
- Download Programming & Alteration Method
Calling & Communication
a. with ResidentialStations. -b GO to p.4
fromyour PC, makingdata input. b. with EntranceStation. -+ Go to p.5
c. with SecurityGuardStation. -b Go to P.6
from Aiphone's Web Site: d. PANICcall & Answer-back. -b GO to p.6
httix/iwww.aiDhone.com/
(* IncludesLine-off troublealarm)
- Cinnectyour'PC with GF-MKin conjunctionwith
ProgrammingbyGF-MK
- On LCD display, see a message "AIPHONE to
confirmsystem isinstandby.
Prior to programming, it is suggested to have
your own ID code newly registered,
so that any
other personcannotget intothesystem.
Firstly,enter programmode.
the connectingcable suppliedwith GF-MK.
-b GotoP.2
-b GotoP.8
* Incase your programmedIDcode isforgotten,
SecurityGuardStations
1 & 2
Entrance b
-1-
l. -A\ - ResidentialStations
== 6.. ........... "Y .....
____j
CALL

PROGRAMMING
/R While being programmed, PANIC CALL is not receivable on GF-MK,
Enter Program Mode
1 LCD YOUR OPERATION
.........................................
1 1 AIPHONE + @ @aaaa I
- a
I
INITIALID CODE
J
INITIALID CODE
I ID CODE = @ + 4 digit
Select Menu & Quit
LCO YOUR OPERATION
MFNi I
.-
I
1 SELECTLANGUAGE -b
2 CHANGE IDCODE +
3 RESIDENCEINFO. . +
@ PGO to Menu
DECIDE & NEXT
@) - Standby
DEClDt% BACK
1-5
Menu 1 : Select language Menu
2: Change ID code
LCD YOUR OPERATION
+@
DECIDE & NEXT
MENU ENGLISH
FRANCAIS
1
I
+ @ - Menu2
DECIDE & BACK
LCD YOUR OPERATION
-49
DECIDE & NEXl
;w I
Enter new ID code ;+;
: TORIGHT
DO@@ ~
: TOLEFT I
*4-I
NEW ID(4digit)
r
-..-.. -
-b @ Menu3
DECIDE&BACK
I ID CODE =
@ + 4 digit
Menu 3: Write Residence Info.
LCD YOUR OPERATION
Move CUR
- - -- - --
DECG NEXT
Enter ROOM #
+am+ @
3-or 4digit DECIDE & NEXT
r(
+ Enter a name 'SMITH' (example)
TO RlGHl
--+
a
TO LEFT
4---
CLEAR
M ......
S
I
'+ @ + @ + Menu4
DECIDE&NEXT DECIDE &BACK
Menu 4: Set imputtimeout timer
LCO YOUR OPERATION
+@
DECIDE & NEXT
J
r
+@PJ+ DECIDE @ & NEXT
2-digit 1__c_I (15-99) ,
4
@ - Menu5
DECIDE & BACK
to clear the previous name
and enter a new name.
-2-

Menu 5: Programming <<
,&, While connectingdate to the system,whole system is not operatableincludingPANIC CALL.
Before initiating PROG~MMING << operation,make sure ROOM number has beenprogrammed on Menu RESIDENCE INFO.
+@
. DECIDE & NEXT
J
J
-+ Liftthe handset
(SecurityGuardStation)
Programming Step 4
1
At an ResidentialStationnumber I, lifthandset.
Communicationchannel isestablished.
With Scroll buttons,
havethe assigned
Name displayed,
andpress
@ button
Hearingsingle BEEPtone meansthe station has beencorrectlyset.
(Doublebeeptone
for secondstation)
Hang up handset.
Go to each Residentialstations, and consecutivelyprogrameach handsetstationinthe same manner as in ProgrammingStep..
Hangup handset.
(SecurityGuardstation)
+@
J DECIDEh-BACK
+ @ + Standby
DECIDE&BACK
NOTES;
If already two ResidentialStationshave beenlinked, setting a thirdstationwill producea warning beeptone.
To erase linkagehavethe assignednamedisplayed, pressCALL buttonmore than 3 seconds.
Continuous tone notifiesthe link has beencancelled.
-3-

VVITH RESIDENTIALSTATION
Calling a ResidentialStation
At SecurityGuardStation . At ResidentialStation
Calltonesounds for
seconds. Communicatewiththe turn
off inapproximately 2.5
Liftthe handset, havethe name i
’ displayed,and pressCall button. i
(See below)
Liftthe handset
to replywithin
approximately
45 seconds.
Security Guard Station. minutes.
4 When finished, hang up handset.
Communicationwill automatically
2 approximately 10
* + +
Note: See “IN USE” isnot displayed. i
1. Calling
(1) By ScrollingNames
LCD YOUR OPERATION
+ Pressbuttonintermittently
or holddown for 2 sec. to
show in succession.
(2) By Diallinga Room Number
YOUR OPERATION
I LCD
+ PressROOM #.
a@a
J
+@
J
CALL
(3) By SelectingName EnteringAlphabets 2. Communication (commonoperation)
LCD YOUR OPERATION I LCO YOUR OPERATION
AIPHONE
J ENTER
-b
J
J
-b
‘SMITH’ (example)
@@@@a @ ***
S
0
CALL
i Whenthere is no name, (example:A) i
8
8
,
+ Apartmentstation
lifts handset.
/
Receiving a call from Residentialstation
I IN COMMUNICATION 1 ~ Commun,cate
+
The channel isturned off inapprox.
2-If2 min.
J OR Press @
CANCEL
Notes; .When pressing and holding down SCROLL A or v buttonfor
approximately
2 seconds, resident names will beshown
automatically at every
0.4 seconds.
.When
ROOM #111 and 1111 are both present, enter 1,1,1 andthe
Resident namefor
111 will bedisplayed, and press 1 one more
time, andthe name for
ROOM 1111 will bedisplayed.
At ResidentialStation
Liftthe handset,then pressSecurity
Guard CALL button. Mutedcall tone
isheard. When the system is busy
with a communication, the Residential
Stationwill hear a busytone.
(Whenany linkage has not been
established,the call is
just nullified.)
-Security
Guard
CALL
button
At Security Guard Station
2 Calltone ringsfor approximately
10 seconds, and ROOM No. & 3 communicate. uphandset.
Resident’sNAMEare displayed.
Lift handset and reply.
Liftthe handset, and
4 When finished, hang
Communicationwill
automaticallyturn
off
A inapproximately 2.5
minutes.
+- + +
Notes;
In case two Security Guard Station are
linked, another Securify Guard Station
turns
off and “IN USE is displayed on
-4-

WITH ENTRANCESTATION
Receivinga callfrom EntranceStation
Requires name registration and linkage.
At EntranceStation
1
Momentarilydepress
a Call button.
Mutedcalltone is
heardfrom the
EntranceStation.
At Security Guard Station
When finished, hang upthe handset.
Communicationwill automatically turn
off
While communicating,
Door Release
3 4
Momentarilydepress DOOR At the communicating
RELEASE button. entrance station, door
release isactivated.
+
DOOR
RELEASE
1 button
inapproximately 2.5 minutes.
Turnon Entrance Light
3' 4'
Momentarilypress LIGHTbutton. External lightturns on
at the entrance for a
preprogrammed
- length of time.
LIGHT
button
Calling EntranceStation
Does not require name registration or linkage.
1 2
Liftthe handsetand press@ 0 button.
Note;WhenenteringQonIy, the Press a numeric button (1-5)
to select the
+ EntranceStation desired.
messageisENTERA LETTER,
as iscommonoperation entering
an alphabet insearching name.
Note: See i'lN USE" is notdisplayed.
3
PressCALL button, and talk to the
Entrance Station.
Whenthere is
no corresponding Entrance
Station, a messageNO ENTRY appears
on upper case.
While communicating, LIGHT
& DOOR
RELEASEbuttons are operative.
4
When finished, hang up handset.
Communicationwill automaticallyturn
off
inapproximately2.5 minutes.
-5-

BETVVEEN SECURITY GUARD STATIONS
At Calling Station
Liftthe handset, press @, @ buttons.
Press
@ button, andCALLbutton.
Mutedcall tone isheard from handset receiver.
1
Notes: See “IN USE” is not displayedat start of operation.
‘When entering@ only, the message is ENTERA LETTER, as iscommonoperation entering analphabet insearching name aswell,
*Whenno Security Guard Station isregistered,a message NOENTRY
comes on.
PANIC CALL
At Securiw Guard Station
i At ResidentialStation
3
-1
Alarm sounds,and PushPANIC
CALLswitch*
t
ROOMNo. and
EMERGENCYwith
ResidentNAME.
are displayed alternatly.
Stop alarm
by pressing @
CANCEL button.
*Variesbymodel.
~
WP,
BWP*
Be%P
Or Line-off troubletakesplace
PANIC CALLanswer-back
4 -6 -7
Liftthe handset,see the nameon
LCDdisplay,and pressRESIDENCE
i call tone, soundsfor communicatewith
CALLbutton. SecurityGuardStation.
i Thealarm turning to normal Liftthe handsetand UnlockPANICCALLswitch
Restores to nomal.
8
Press@CANCEL button to clear signal. After communication,PANICCALL
alarmsoundscomes backon.
Notes;
1. Whenone SecurityGuardStationis alreadyengaged inPANICCALLandcommunication,theother SecurityGuardStationcan not breakin.
(The busytone is heardfrom the handset receiver.)
2. At the SecurityGuardStation, either answer-back to a PANICCALLoriginatedResidentialStation, or normalcalling to other Residential
Stationisselectable.(Onlynamescroll buttonsare not operational.) Whenthe system isoccupied, it can not operate.
3. At the ResidentialStation,the PANICCALLalarmsoundsat the HIGHlevel regardless of adjusting of volume control.
4. Evenwhen the system isoccupied, PANICCALL can beactivated.(Up to 10 ResidentialStationscan be linkedwith SecurityGuardStation.
5. SecurityGuardStation, when receivedmultiplePANICCALLS,will haveNEXTALARM messagedisplayed.
6. Whenthe Arrow messageis present, it is possible to selectother ResidentialStationswith SCROLLbuttons.
7. Evenwhen system isoccupied, PANICCALLanswer-backinitiatesafterthe othercommunicationisturned off.
8. At the ResidentialStation insame room,whilesounding PANIC CALLsignal, normalcall or doorbellcall can not be received.
Answer-backfrom SecurityGuardStation is only available.
-6-

MOUNTING
Desk-top mountingon GFW-S stand
It issuggested to mountthe station so that the LCD displaycomes at the user's eye level.
1. Separatemountingbracketon
back
of the unit.
Notes;
4. Placeprotectioncover on
terminalsection.
Wall-mounting
2. Attach mountingbracket to
GFW-S standasshown.
3. Connectwiresonterminalblock, puttingwires neatly inthe slot.
GFW-S(not included)
Mounting
1. Attach the mountingbracket to Single-gangbox.
2. Connectwires onterminal block.
3. Mountthe uniton mountingbracket.
U;lplug
I
Slideand pullout the terminal block.
Stripcablejackets,and putall
the wires neatly
A, intoslot,otherwisedamaoesthewires bv
I
Cut out a hole for surfacecablerun.
-
tch: locallyavailable
GF-MKBackview
-7-

TECHNICAL PRECAUTIONS
Ambient temperature: 0°C-40°C (+32"F-+104"F).
Askingfor repairs:
Cleaning: Incasethe unitdoes not operate properly,ask qualified technician
to repair it.
Cleanthe equipmentwith a
soft clothdampenedwith neutral householdcleanser.
Never use any abrasive cleaner or cloth.
I Adjustingcall tone volume; Settingswitches;
GF-MK
.- t
Calltone volumecontrol
'.-*'
_.....
I______
LOW + MID .+ HIGH
Bottom expandedview
DIP switchesbank
(SW1)
GF-MK Backview
When you forgotyour ID code
I The IDcodereturns;oinitial@llll.
Forthe second Security
2: Remains unused.
3: Remains unused.
Put the switch
4 to ON position.
Note; After wiring, be sure to set for second GF-MK station, which must not
be rechanged.
If forgotten, "CALL-ID#ERROR"messagewill be displayed.
In this case, put DIP SW4 to ON while GF-BC is turned off, and repower it.
SPEC I F I CAT1 0 NS (G F- IVI K)
LCDdisplay: Max. 16lettersfor names.
Dimensions: 210
H x 215 W x 69 D (mm). 8-1/4" H x 8-1/2" W x 2-3/4" D.
Unitweight: Approximately9009 (1.98 Ibs.)
This equipment has been tested and found to comply withthe limitsfor a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limitsare designed
to provide reasonable protection against harmful interferencein a residential installation. Thisequipment generates, uses, and can radiateradiofrequency energy
and, if
not installed and used inaccordance withthe instructions, may cause harmful interference to radiocommunications. However,there is no guarantee that
interference will
not occur ina particular installation. Ifthis equipment does cause harmful interference to radioor televisionreception,which can be determined
bytuming the equipment off and on, the user isencouraged
to try to correct the interferenceby oneor more of thefollowing measures:
Reorientor relocate the receiving antenna. Connect the equipment intoan outlet on a circuitdifferent from thatto which the receiverisconnected.
Increasethe separation betweenthe equipment and receiver. Consult the dealer or an experienced radiomtechnicianfor help.
44f4446444444444444444f64444464444444464444444444444644644444444
4
4
+
4 Aiphone warrants its products to befreefrom defects of materialand workmanship under normaluseand servicefor a period of .I.
* one year afterdelivery to the ultimateuser and will repairfree of chargeor replaceat nocharge, shouldit become defective
$
$
uponwhich examinationshalldiscloseto be defectiveand under warranty. Aiphone reservesuntoitselfthe sole rightto make +
4 the finaldecisionwhether thereisa defect inmaterialsand/orworkmanship; and whether or not the product is withinthe 4
4 warranty. 4
$ This warrantyshallnot applyto anyAiphone productwhich has beensubjectto misuse, neglect,accident,or to use inviolation $
4 of instructionsfurnished, norextendedto unitswhich havebeenrepairedor alteredoutsideofthe factory. Thiswarranty does 4
+
2 not cover batteriesor damage causedby batteriesusedin connectionwith the unit.
4
4
This warrantycovers benchrepairsonly, and any repairsmustbe made at the shop or placedesignatedinwriting by Aiphone. 4
4
4
$ Aiphonewill notberesponsiblefor any costs incurredinvolvingon siteservice calls.
*44.I.44444.I.444f.I.fff44+44*44.I.4444444444444444444444444444444444444
WARRANTY 4
AIPHONE CO., LTD., NAGOYA,JAPAN
AIPHONE CORPORATION,BELLEVUE,WA, USA
AIPHONE EUROPEN.V., ANTWERP, BELGIUM
AI PHONE^
Providing Peace of Mind
http:/lwww.aiphone.cornl
Printedin Thailand (E)
-8-