AirMan PDS375S-6A1 User manual

1.Safety
1-4
Caution of hose attachment and removal

Piping or the hose from this machine service valve
should use what can be borne enough for the discharge
pressure of this machine

Please connect piping or a hose to this machine service
valve firmly before operation and during operation. If
the connection part is loosening, there is a possibility of
piping or a hose separating and getting seriously
injured.

Please remove after closing a service valve and
extracting pressure remained, in case piping or a hose
is removed. If pressure remained should remain, a near
thing blows away or there is a possibility of a hose
whipping, causing a phenomenon and getting seriously
injured.

In order to use it safely, please read the handling of the
work tools often used.
TR0088
Handling battery

Keep flames away from battery.
 Battery may generate hydrogen gas and may
explode.
 Therefore, recharging should be done in a
well-ventilated place.
 Keep lit cigarettes or matches away from battery.
 Do not check the battery by short-circuiting the positive
and negative terminals with a conductor.

Do not charge a frozen battery. Otherwise it may
explode. If the battery is frozen, warm it up until the
battery temperature becomes 61° F to 86° F (16℃to
30℃.)

When you deal with a battery, please be sure to wear
protection implements, such as protection glasses
and a glove.

Do not let electrolyte solution make contact with clothes
or skin. It could damage your clothes and skin.
 When such electrolyte solution contacts your clothes or
skin, wash it away with large amounts of water
immediately.
 If the battery electrolyte solution gets into your eyes,
wash it away immediately with plenty of water and see a
doctor at once.

For details on handling, see 6.3.
D004
W010
TR0093
TR0303A

1.Safety
1-5
Ventilation
 Exhaust gas from the engine is poisonous, and could
cause death when inhaled.
A
void using the machine in an insufficiently ventilated
building or tunnel.
PC002
Check and inspections before operation

Check the machine every time before starting operation. (See 2.6)
When trouble is found, shut unit down and repair problem before re-starting.

Inspect machine daily before operation. If inspection is neglected and a problem occurs
during operation, it could result in damage to the unit or even cause a fire.
Protection equipments

Please wear protection implements, such as a
helmet, protection glasses, earplugs, safety shoes, a
glove, and a protection-against-dust mask, according
to the contents of work for safety.
TR0085