Airspan AirSpeed 2900 User manual

AIRSPEED 2900 INSTALLATION GUIDE
5G Outdoor gNB
Installation Guide
Document Part Number: DUG01085
Document Revision: A
Published: November 2021

© Copyright by Airspan Networks Ltd., 2021. All rights reserved worldwide.
Legal Notices
The information contained within this document is proprietary, privileged and intended only for the recipient. As such, the
information is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any
specific agreements protecting Airspan Networks Ltd. rights in the aforesaid information. Neither this document nor the
information contained herein may be published, reproduced, transmitted or disclosed to third parties, in whole or in part,
without the express, prior, written permission of Airspan Networks Ltd. In addition, any use of this document or the
information contained herein for the purposes other than those for which it is disclosed is strictly forbidden.
Airspan Networks Ltd. reserves the right, without prior notice or liability, to make changes in equipment design or
specifications.
Information supplied by Airspan Networks Ltd. is believed in good faith to be accurate and reliable, while every care has
been taken in preparing these documents. However, Airspan Networks Ltd. does not make any representations and gives
no warranties of whatever nature in respect of these documents, including without limitation, the accuracy or
completeness of any information, facts and/or opinions contained therein. No responsibility is assumed by Airspan
Networks Ltd. for the use of the documents nor for the rights of third parties which may be effected in any way by the use
thereof. The provision of these documents (and the documents themselves) does not constitute professional advice of any
kind. Any representation(s) in these documents concerning performance of Airspan Networks Ltd. product(s) are for
informational purposes only and are not warranties of future performance, either expressed or implied. Airspan Networks
Ltd., its affiliates, directors, employees and agents shall not be held liable for any damages or losses, of any nature
whatsoever, arising from any use of and/or reliance on the documents.
These documents may contain flaws, omissions or typesetting errors; no warranty is granted nor liability assumed in
relation thereto unless specifically undertaken in Airspan Networks Ltd. sales contract or order confirmation. Information
contained herein is periodically updated and changes will be incorporated into subsequent editions. If you have
encountered an error, please notify Airspan Networks Ltd.
Product performance figures quoted within this document are indicative and for information purposes only.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
1
TABLE OF CONTENTS
Document Information................................................................................................................... 4
Revision History................................................................................................................................ 4
Warnings and Cautions................................................................................................................... 5
Human Exposure to Radio Frequencies.......................................................................................... 5
Radio Interference............................................................................................................................ 5
Modifications.................................................................................................................................... 5
General. ............................................................................................................................................ 6
Important Safety Instructions ................................................................................................... 6
Safety….............................................................................................................................................. 7
Warning of Hazardous Voltages ...................................................................................................... 7
Adherence to European Directive 2014/53/EU.............................................................................. 7
Warning Symbols.............................................................................................................................. 8
Service Information.......................................................................................................................... 8
UL Information ................................................................................................................................. 8
Lightning Protection......................................................................................................................... 8
Outdoor Ethernet Cabling................................................................................................................ 9
DECLARATION OF CONFORMITY ..................................................................................................... 9
GPS Compliance.............................................................................................................................. 12
Maximum Output TX Total Power.................................................................................................12
Voltage and Amperage................................................................................................................... 12
Antenna System .............................................................................................................................13
Integrated Antenna Parameters....................................................................................................13
About this Document.................................................................................................................... 14
Purpose........................................................................................................................................... 14
Intended Audience......................................................................................................................... 14
Document Conventions .................................................................................................................14
Related Reading..............................................................................................................................15
Customer Care Help Desk............................................................................................................. 15
Airspan Encourages Comments..................................................................................................... 15
1Getting Started ................................................................................................................. 16
1.1 AirSpeed 2900 Installation Checklist ............................................................................... 16
2Verifying Prerequisites ..................................................................................................... 17
2.1 Verifying Site Requirements............................................................................................. 17
2.2 Verify Installation Requirements .....................................................................................17
2.2.1 Verify the Tools .............................................................................................................17
2.2.2 Verify the Parts and Kits................................................................................................18
2.2.3 Power Supply................................................................................................................. 19
2.2.4 Connections................................................................................................................... 19
2.2.5 Physical Dimensions...................................................................................................... 21

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
2
2.2.6 Environmental............................................................................................................... 21
3AirSpeed 2900 Installation............................................................................................... 22
3.1 Connecting the GPS Antenna........................................................................................... 22
3.1.1 Weather-proofing the GPS Antenna Connection........................................................22
3.2 Tilt bracket Assembly........................................................................................................22
3.3 Pole Mounting Assembly..................................................................................................23
3.4 Wall Mount Assembly.......................................................................................................26
3.5 Tilt Adjustment .................................................................................................................27
4Connect and Manage Cables ........................................................................................... 28
4.1 Grounding ......................................................................................................................... 28
4.2 LED Display........................................................................................................................29
4.3 Single Mode LC Cable Insertion .......................................................................................30
4.4 DC Cable Preparation .......................................................................................................30
Appendix A. Installation Checklist ............................................................................................ 34
Appendix B. Abbreviations ....................................................................................................... 35
FIGURES
Figure 1: AirSpeed 2900 with GPS attached ............................................................................................... 16
Figure 2: AirSpeed 2900 Top Ports (with integrated antenna) .................................................................. 19
Figure 3: AirSpeed 2900 Bottom Ports........................................................................................................ 20
Figure 4: Environmental and Standard Compliance ................................................................................... 21
Figure 5: Tilt bracket Assembly.................................................................................................................... 23
Figure 6: Position on Pole............................................................................................................................. 24
Figure 7: Mounting Bracket on Pole............................................................................................................ 24
Figure 8: Pole Mounting Assembly.............................................................................................................. 25
Figure 9: Mounted on Pole .......................................................................................................................... 25
Figure 10: AirSpeed on Wall......................................................................................................................... 26
Figure 11: Tilt Adjustment............................................................................................................................ 27
Figure 12: Ground Connection..................................................................................................................... 28
Figure 13: Pre-assembled Single Mode LC Cable........................................................................................ 30
Figure 14: Stripping Dimensions (DC Cable)................................................................................................ 31
Figure 15: Open Housing Lock ..................................................................................................................... 31
Figure 16: Separate into Sections................................................................................................................ 31
Figure 17: Insert Gland Nut.......................................................................................................................... 31
Figure 18: Pass DC Cable Thru ..................................................................................................................... 31
Figure 19: Power Wire Connection.............................................................................................................. 32
Figure 20: Tightening of Set Screws ............................................................................................................ 32
Figure 21: Tighten the Strap Clamp............................................................................................................. 32
Figure 22: Align Marks + Click in Place ........................................................................................................ 32
Figure 23: Place Split Rubber Gland ............................................................................................................ 33
Figure 24: Place Tightening Cone on Split Gland........................................................................................ 33
Figure 25: Tighten gland Nut ....................................................................................................................... 33
Figure 26: Secure Housing Lock................................................................................................................... 33

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
3
TABLES
Table 1: AirSpeed 2900 gNB Maximum Output TX Total Power................................................................ 12
Table 2: Voltage & Amperage Draws........................................................................................................... 12
Table 3: Integrated Antenna Parameters.................................................................................................... 13
Table 4: Typographic Conventions .............................................................................................................. 14
Table 5. Minimum Hardware Requirements............................................................................................... 17
Table 6. Parts & Kits...................................................................................................................................... 18
Table 7. AirSpeed 2900 Physical Dimensions.............................................................................................. 21
Table 8: System LED Function...................................................................................................................... 29
Table 9: ABBREVIATIONS & DEFINITIONS.................................................................................................... 35

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
4
Document Information
This document details procedures for installing the Airspan’s AirSpeed 2900 gNB 5GB Outdoor unit.
AirSpeed 2900 is a compact, easy to deploy gNB, for pole and wall installation.
This document is intended for qualified personnel with a working knowledge of 5G.
Revision History
Revision
Date
Summary of Changes
Created by
Rev 0.1 - 0.4
November 2021
•Initial document –draft
•After comments - draft
CY/MSF
Rev A
November 2021
Published
CY/MSF

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
5
Warnings and Cautions
Human Exposure to Radio Frequencies
The AirSpeed 2900 gNB 5G OD unit should be operated from a minimum safe distance of 93 cm
(3.05ft.)
Radio Interference
The AirSpeed 2900 generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and off, the technician is encouraged to try to correct the
interference by performing one or more of the following measures:
•Re-orientate or relocate the unit
•Increase separation between the units and/or End Devices
•Connect the equipment to a circuit different from that to which the power source is connected
Modifications
Any changes and modifications to this device that are not expressly approved by Airspan Networks
may void the user's authority to operate the equipment.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
6
General
•Only qualified personnel should be allowed to install, replace, and service the equipment.
•The device cannot be sold retail, to the general public or by mail order. It must be sold to
operators.
•Installation must be controlled.
•Installation must be performed by licensed professionals.
•Installation requires special training. The AirSpeed 2900 should be installed ONLY by experienced
installation professionals who are familiar with local building and safety codes and, wherever
applicable, are licensed by the appropriate government regulatory authorities. Failure to do so
may void Airspan's product warranty and may expose the end user or the service provider to legal
and financial liabilities. Airspan and its resellers or distributors are not liable for injury, damage or
violation of regulations associated with the installation of outdoor units or antennas.
•The device is to be installed in a Restricted Access Location.
•Surge Arrestors and Transient Voltage Surge Suppressors installed external to the ITE are required
to comply with the appropriate CEC/NEC requirements.
•Equipment connected to the PoE port must have its own fire enclosure.
Important Safety Instructions
•Read and Save these instructions
•This Installation Guide contains instructions and warnings that should be followed during
installation, and operation.
•Failure to follow these instructions could cause bodily injury and/or product failure

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
7
Safety
1. Read this guide and follow all operating and safety instructions.
2. Supply cord is not shipped with the unit and is to be provided by user. Installation is to be
performed by a qualified electrician according to local codes. Installation to be done in
accordance with the National Electrical Code (NEC), ANSI/NFPA 70, the Canadian Electrical Code
(CEC), Part I, CAN/CSA C22.1, and when applicable, the National Electrical Safety Code, IEEE C2.
3. Static sensitive components inside - do not remove the lid or base: No user serviceable parts
inside.
4. The ground connection should be made before connecting to supply connections.
5. Position the power cord to avoid possible damage; do not overload circuits.
6. Do not place this product on or near a direct heat source, and avoid placing objects on the
terminal.
7. To avoid electrical shock do not install this device during adverse conditions such as rain or
inclement weather.
8. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the power
before cleaning.
9. The units should not be located too near power lines or other electrical power circuits, where it
can come into contact with such power lines or circuits.
10. The radio transceiver must be properly grounded to protect against power surges and
accumulated static electricity. It is the user’s responsibility to install this device in accordance
with the local electrical codes.
11. Installation of the AirSpeed 2900 gNB must be contracted to a professional installer.
12. The circuit breaker should be easily accessible in case you have to disconnect the device.
13. When installed in the final configuration, the product must comply with the applicable Safety
Standards and regulatory requirements of the country in which it is installed. If necessary, consult
with the appropriate regulatory agencies and inspection authorities to ensure compliance.
Warning of Hazardous Voltages
On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power.
Remove metal jewelry that could come into contact with AC power.
On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that
may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits.

Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances
Regulations 1990). At the end of any Airspan products life cycle, the customer should
consult with Airspan to ensure that the product is disposed of in conformance with the
relevant regulatory requirements.
Adherence to European Directive 2014/53/EU
European Council Recommendation 2014/53/EU details basic restrictions and reference levels on
human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these
recommended restrictions and reference levels should provide a high level of protection as regards
the established health effects that may result from exposure to electromagnetic fields.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
8
Warning Symbols
The following symbols may be encountered during installation or troubleshooting. These warning
symbols mean danger. Bodily injury may result if you are not aware of the safety hazards involved in
working with electrical equipment and radio transmitters. Familiarize yourself with standard safety
practices before continuing.
Caution, hot surface
Caution
Electro-Magnetic
Radiation
High Voltage
DC
Service Information
Refer all repairs to qualified service personnel. Do not modify any part of this device, as this will void
the warranty.
Disconnect the power to this product and return it for service if the following conditions apply:
1. The terminal does not function after following the operating instructions outlined in this manual.
2. The product has been dropped or the housing is damaged.
Locate the serial number of the terminal and record this on your registration card for future
reference. Also record the MAC address, located on the product sticker.
UL Information
•The equipment must be properly grounded according with NEC and other local safety code
requirements.
•Reminder to all the BWA system installers: Attention to Section 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as is
practical.
•AirSpeed 2900 gNB is designed to operate in environmental conditions complying with IP65 and
relevant standards.
Lightning Protection
WARNING: The following notes are general recommendations for the system.
The wireless equipment should be installed by a qualified professional installer and must follow local
and national codes for electrical grounding and safety. Failure to meet safety requirements and/or
use of non-standard practices and procedures could result in personal injury and damage to
equipment. A direct lightning strike may cause serious damage even if these guidelines are followed.
All outdoor wireless equipment is susceptible to lightning damage from a direct hit or induced current
from a near strike. Lightning protection and grounding practices in local and national electrical codes
serve to minimize equipment damage, service outages, and serious injury. Reasons for lightning
damage are summarized as:

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
9
- Poorly grounded tower/antenna sites that can conduct high lightning strike energy into equipment.
- Lack of properly installed lightning protection equipment that can cause equipment failures from
lightning induced currents.
A lighting protection system provides a means by which the energy may enter earth without passing
through and damaging parts of a structure. A lightning protection system does not prevent lightning
from striking; it provides a means for controlling it and preventing damage by providing a low
resistance path for the discharge of energy to travel safely to ground. Improperly grounded
connections are also a source of noise that can cause sensitive equipment to malfunction.
A good tower grounding system disperses most of the surge energy from a tower strike away from
the building and equipment.
To limit the equipment damage due to a lightning strike, the following practices are recommended
for the wireless system:
- Provide direct grounding from the antenna mounting bracket, the radio and antenna and the
lightning/surge protectors to the same ground point at the base of the tower or a ground bus on the
building. Use the grounding screws on the antenna bracket and the radio and antenna for terminating
the ground wires.
- The AC wall outlet ground must be connected to the same grounding system as the eNodeB.
Outdoor Ethernet Cabling
- Ethernet cable connected to should be outdoor grade with UV protection.
- Use shielded out CAT5e (minimum) cabled terminated with metallic RJ45 connectors.
- In order to protect any indoor units, install surge protection circuits on all copper cables on their
entrance to the building.
- Surge protection circuit must use a minimum 16AWG grounding cable.
DECLARATION OF CONFORMITY
Declaration of Conformity with Regard to the R&TTE Directive 2014/53/EU
Czech:
Airspan tímto prohlašuje, že tento přístroj je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 2014/53 / EU.
Danish:
Undertegnede, Airspan erklærer hermed, at følgende udstyrsenhed opfylder de væsentlige krav og
andre relevante krav i direktiv 2014/53 / EF.
Deutsch:
Hiermit erklärt Airspan, dass die Produkteinheit die grundlegenden Anforderungen und anderen
relevanten Bestimmungen der Richtlinie 2014/53 / EU erfüllt.
Estonian:
Käesolevaga kinnitab Airspan, et seadme seade vastab direktiivi 2014/53 / EL olulistele nõuetele ja
muudele kõnealuse direktiivi asjakohastele sätetele.
English:

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
10
This equipment is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
Español:
Por medio de este Airspan, declara que la unidad cumple con los requisitos esenciales y cualquier otra
disposición aplicable o exigible de la Directiva 2014/53 / UE.
Greek:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ΠΡΟΔΙΑΓΡΑΦΗ, η Airspan ΔΗΛΩΝΕΤΑΙ ότι η μονάδα συμμορφώνεται με τις
ουσιώδεις απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 2014/53 / ΕE.
Français:
Airspan déclare par la présente que l'appareil est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 2014/53 / UE.
Italiano:
Con la presente Airspan dichiara che questa unità è conforme ai requisiti essenziali e alle altre
disposizioni pertinenti stabilite dalla direttiva 2014/53 / UE.
Latvian:
Ar šo Airspan paziņo, ka vienība atbilst Direktīvas 2014/53 / ES būtiskajām prasībām un citiem
attiecīgajiem noteikumiem;
Lithuanian:
Šis „Airspan“ pareiškia, kad šis įrenginys atitinka esminius Direktyvos 2014/53 / ES reikalavimus ir
kitas nuostatas.
Nederlands:
Airspan verklaart hierbij dat de apparaateenheid voldoet aan de essentiële vereisten en andere
relevante bepalingen van richtlijn 2014/53 / EU.
Maltese:
Hawnhekk, Airspan, tiddikjara li din l-unità tikkonforma mar-rekwiżiti essenzjali u dispożizzjonijiet
rilevanti oħra li jinsabu fid-Direttiva 2014/53 / UE.
Hungarian:
Alulírott, az Airspan kijelenti, hogy az egység megfelel a 2014/53 / EU irányelv vonatkozó alapvető
követelményeinek és egyéb követelményeinek.
Polish:
Niniejszym Airspan oświadcza, że urządzenie jest zgodne z zasadniczymi wymaganiami i innymi
odpowiednimi postanowieniami dyrektywy 2014/53 / UE.
Português:
Airspan declara que esta unidade está em conformidade com os requisitos essenciais e outras
disposições da Diretiva 2014/53 / UE.
Slovenian:
Airspan izjavlja, da je ta enota skladna z bistvenimi zahtevami in drugimi ustreznimi določbami
Direktive 2014/53 / EU.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
11
Slovak:
Airspan týmto vyhlasuje, že tento prístroj spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 2014/53 / EÚ.
Suomalainen:
Airspan vakuuttaa täten, että laitteen tyyppi on direktiivin 2014/53 / EU olennaisten vaatimusten ja
muiden asiaankuuluvien säännösten mukainen.
Swedish:
Därmed intygar Airspan att denna enhet överensstämmer med de väsentliga egenskapskraven och
andra relevanta bestämmelser som anges i direktiv 2014/53 / EU.
Íslenska:
Airspan lýsir hér með yfir að þessi eining uppfylli grunnkröfur og aðrar kröfur tilskipunar 2014/53 /
ESB.
Norsk:
Airspan erklærer herved at utstyrsenheten oppfyller grunnleggende krav og andre relevante krav i
direktiv 2014/53 / EU.
Român:
Airspan declarăm pe propria răspundere că produsul produsului respectă cerințele esențiale și alte
prevederi aplicabile din Directiva 2014/53 / UE.
The Declaration of Conformity related to this product can be obtained from [email protected].

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
12
GPS Compliance
The GPS is in compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU."
The GPS complies with the following EMC Common Regulatory Testing standards:
➢EN55022: Radiated and Conducted Emissions
➢CISPR 22: Class B
➢EN 50081-1: Generic Emissions Class B
➢EN 50082-1: Generic Immunity Class B
➢EN 61000-4-2: Electrostatic Discharge Immunity
➢EN 61000-4-3: Radiated RF EM Field Immunity Test
➢EN 61000-4-4: Electrical Fast Transient/Burst Test
➢EN 61000-4-6: Conducted Immunity
➢EN 61000-4-8: Magnetic Field Immunity

A GPS is recommended for synchronizing the unit.

An optional GPS Lightning/Surge protector is available from Airspan when installing the
GPS antenna in a remote location for lightning prone deployments.
Maximum Output TX Total Power
Table 1: AirSpeed 2900 gNB Maximum Output TX Total Power
Frequency Band
TX Power
Antenna Gain
n48 (3550MHz-3700MHz)
4 x 2.5W (4x 34dBm)
17dBi
!
Do not set maximum output TX power to higher than local regulations.
Voltage and Amperage
Table 2: Voltage & Amperage Draws
Power Source
Power Consumption (W)
-48D DC (-40.5V to -57V)
≈100

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
13
Antenna System
The AirSpeed 2900 supports the following antenna options:
•Integrated antenna –front mount integrated antenna, supports two carriers, 2x 2T2R.
•External antenna –4 ports to two external antennas. Each antenna can serve a 2T2R sector in
different directions.
•Hybrid –single sector via the integrated antenna and a second sector via the external antenna.
Integrated Antenna Parameters
Table 3: Integrated Antenna Parameters
Polarization
Elevation BW
AZ Beamwidth
Gain
Dual Slant ±45
8
65°
17dBi

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
14
About this Document
Purpose
This guide provides the workflow and step-by-step procedures for installing the Airspan’s AirSpeed
2900 gNB 5G Outdoor. These procedures include:
➢Verify prerequisites
➢Install Tilt bracket & Pole/Wall bracket
➢Install the AirSpeed 2900
➢Connect and manage cables
Intended Audience
This guide is intended for persons who are responsible for installing the AirSpeed 2900 equipment.
Document Conventions
This document uses the following typographic conventions.
Table 4: Typographic Conventions
Convention
Element
Blue underlined text
Cross-reference links.
Bold text
Keyboard buttons and GUI elements.
Command
Command names or phrases.
Computer output
Text displayed by the computer.
Hyperlinks
Website and e-mail addresses.
Danger
Signifies a hazardous situation—if not avoided—will cause death or
serious injury. Describes how to avoid it.
Warning
Signifies a hazardous situation—if not avoided—can cause death or
serious personal injury. Describes how to avoid it.
! Caution
Signifies a hazardous situation—if not avoided—can void the
product warranty, and cause property damage. Describes how to
avoid it.
Information/Note
Provides necessary information to explain a task.
Tip
Provides helpful hints.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
15
Related Reading
The following documents contain related information:
•AirSpeed 2900 gNB 5G OD Product Specification
•Airspan 5G Commissioning Manual (pending)
Customer Care Help Desk
Airspan’s Customer Care Help Desk offers prompt and efficient customer support services.

To avail Airspan’s Customer Care Help Desk support, you must be a registered user and
must have a valid support contract. To register, click here and fill the Registration form.
To create and update issue logs, send e-mails to Customer Care Help Desk. Once you submit your
issue, the system generates a new issue and sends an issue number for your reference. The system
uses this issue number to categorize and store e-mails under the appropriate issue.
To help Customer Care Help Desk identify your issue, include the issue number and your Customer
Care Helpdesk account details in all further communications.
Main Operations
Airspan Communications Ltd.
Capital Point
33 Bath Road
Slough, Berkshire
SL1 3UF, United Kingdom
Tel: [phone]
Worldwide Headquarters
Airspan Networks Inc.
777, Yamato Road, Suite 105
Boca Raton, FL 3341-4408, USA
Tel: [phone]
Airspan Encourages Comments
Airspan welcomes any feedback and suggestions that help to improve the quality of the
documentation. Send your feedback to d[email protected].

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
16
1Getting Started
1.1 AirSpeed 2900 Installation Checklist
Plan the installation of the AirSpeed 2900 by using the Installation Checklist, which you can find as a
removable job aid in Appendix A for this guide.
Figure 1: AirSpeed 2900 with GPS attached

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
17
2Verifying Prerequisites
Prior to installing the AirSpeed 2900 gNB 5G, verify the required safety, power, tools, parts and
components. This chapter includes the hardware, software, and client requirements for installation.
2.1 Verifying Site Requirements
Verify where the AirSpeed unit is to be installed, access and installation method.
2.2 Verify Installation Requirements
2.2.1 Verify the Tools
Table 5. Minimum Hardware Requirements
Tool
Use
10 mm or 13/32 inch
wrench
for securing the M6x16 Hex bolts to assemble the Tilt bracket to
the AirSpeed back
7/16 inch wrench
For securing Tilt bracket to the Pole bracket with the 1/4-20 bolts
1/2 inch wrench
For securing the 5/16-18 threaded rods

Airspan does not provide screws and wall anchors for mounting the unit to the wall. The
screw size depends on the structure of the building to which the unit is to be attached.
When selecting screw sizes, consideration must be given to the weight of the unit and
load that may be induced in windy conditions.

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
18
2.2.2 Verify the Parts and Kits

Verify order and requirements to ensure the correct unit type is being installed.
Table 6. Parts & Kits
Installation
Kit / Part
Product Code
Consisting of:
Images
AirSpeed 2900,
3.55-3.7 GHz
(n48)
AS29-N48-DSC1
AirSpeed 2900, n48, Integrated
Antenna, DC
Octis connector
(-48V DC)
Connector for DC connection -
included
SFP
Connector for SFP connection
Octis - RJ45
Ethernet
Connector
Connector for Ethernet RJ45
AirSpeed 2900
universal pole
and wall
Mounting KIT
AS103-U-PMK-1
AirSpeed 2900 mounting kit for
50 - 150 mm (2.6 to 4.3 inch)
pole including:
▪1 - Pole mount Bracket Base
kit, including Tilt bracket and
pole/wall mounting bracket
▪4 - 5/16-18 threaded rod(s)
+nuts, spring washer(s) &
Flat washers
▪2- pole clinch clamps